Choose a Category
Clear All
System of Measurement System of Measurement |
|---|
|
Length Length |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Material Material |
|---|
|
Finish Finish |
|---|
|
Diameter Decimal Equivalent Diameter Decimal Equivalent |
|---|
|
For Use On For Use On |
|---|
|
Weight Weight |
|---|
|
Container Type Container Type |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Electrical Discharge Machining Wire
Use in wire-cutting EDM machines.
Also known as spark machining, electrical discharge machining (EDM) uses electrical current to erode a metal workpiece to a desired shape.
Zinc-coated wire cuts faster than uncoated wire.
Hard wire works better than soft wire in EDM machines with automatic wire threading.
Soft wire stays straight as it comes of the spool, making it better than hard wire for EDM machines that do not have automatic wire threading.
Spool | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength Grade | Dia., mm | Dia. Decimal Equivalent | Lg., m | OD | ID | Elongation | Tensile Strength, psi | Conductivity | For Use On | Weight, lbs. | Each | |
Uncoated Brass | ||||||||||||
| Hard | 0.25 | 0.01" | 9,600 | 5.118" | 3.149" | 1% | 130,000 | 20% IACS | Carbide, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 8.8 | 0000000 | 0000000 |
| Soft | 0.25 | 0.01" | 9,600 | 5.118" | 3.149" | 15% | 72,500 | 20% IACS | Carbide, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 8.8 | 0000000 | 000000 |
Zinc-Coated Brass | ||||||||||||
| Hard | 0.25 | 0.01" | 9,600 | 5.118" | 3.149" | 1% | 130,000 | 21% IACS | Carbide, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 8.8 | 0000000 | 000000 |
| Soft | 0.25 | 0.01" | 9,600 | 5.118" | 3.149" | 15% | 72,500 | 21% IACS | Carbide, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | 8.8 | 0000000 | 000000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)