This wire bounces back after bending. It’s often used to construct springs and wire rope.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

This material has tighter tolerances than standard 303 stainless steel.

Bend this wire and it will stay in place. It's widely used as tying and locking wire.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

Also known as music wire.

Bend this wire and it will stay in place. It is often used as safety lock wire.

This copper wire is clad in nickel to provide excellent corrosion resistance at temperatures up to 1200° F while maintaining high electrical conductivity.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

This wire has a soft temper and will stay in place when bent.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.

Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

Bend this wire and it will stay in place.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

A thimble on the inside of the loop protects the wire rope from fraying.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

This polypropylene rope floats in water, resists rot, and doesn’t lose strength when wet.

Choose this polyester rope for applications that require minimal stretch, such as tie-down applications.

Use this nylon rope when you need to compensate for sudden force, such as in towing applications or dock lines.

Strong even when wet, this rope is a high-performance polyethylene comparable to Spectra.

Make welds quickly with these fast-melting rods.

These rods create stronger welds than standard TIG welding rods for steel.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

With five rosin flux cores, this solder joins faster, uses less material, and transmits less heat than single-flux-core solder.

The high melting point prevents remelting when soldering successive joints with another solder.

Use this solder for general purpose applications.

Composed of pure tin, this solder is safe for use with food service equipment.

The flux leaves minimal residue so there's no cleanup.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Without a flux core, this solder allows you to choose the flux that works best for your application.