We will reply to your message within an hour.
More
Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.
This wire meets stringent military specifications for material quality.
More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.
A durable insulation withstands abrasion, so this wire can be pulled over rough surfaces.
Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.
Use this wire in ovens, furnaces, and other electrical heating equipment where temperatures reach 480° F and higher.
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.
Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.
Install this copper wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.
Also known as primary wire, this wire meets SAE standards for low-voltage wiring in trucks, boats, trailers, and other vehicles.
Keep spools of vehicle wire in multiple colors on hand.
Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.
Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.
Also known as magnet wire, this wire is commonly used in motors, transformers, relays, and other high-speed winding applications.
Use this general purpose cable to supply power to equipment.
After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.
For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.
Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.
The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.
A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.
Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.
Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.
The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission
Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.
Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.
In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.
With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.
This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.
The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.
Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.
Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.
This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.
Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.
This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.
This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.
Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.
Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.
Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.
Designed for indoor applications, these cords are often used to power appliances.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
Use these cords with computers, lab equipment, and office machines that have IEC connections.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.
Hardwire these cords to equipment.
Plug these cords into computers, lab equipment, and office machines that have IEC connections.
Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.
A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.
Use these cords in vehicles and other agricultural and construction equipment.
Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.
These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
These self-coiling cords return to their retracted length after stretching for tangle-free storage.
Designed for indoor use, these cords are often used to power appliances.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Power multiple devices with one extension cord.
In addition to an outlet on the end, these cords have multiple inline outlets.
Keep personnel safe from electric shock with these cords.
A locking lever on the female socket prevents your device from disconnecting.
Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Keep personnel safe from electric shock with ground fault protection.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
These curved outlet strips clamp onto a pole or table leg.
Mount these strips into standard 19" wide electronics racks and enclosures.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
Install these extra-long strips onto the frame of an electrical cabinet.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.
Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.
Ground your electrical system.
Protect electrical systems from lightning strikes on structures up to seventy-five feet tall.