Measures Measures |
|---|
|
|
Scale Scale |
|---|
|
Operating System Compatibility Operating SystemCompatibility |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Maximum Continuous Pressure MaximumContinuous Pressure |
|---|
|
|
Sensor Type Sensor Type |
|---|
|
About Pressure Transmitters
More
About Selecting Temperature Sensors
More
Wireless Pressure and Vacuum Transmitters
- For Use With: Air, Argon, Hydraulic Fluid, Nitrogen, Water
- Accuracy: ±1.5%
- Pipe Connection: See table
- Housing Material: Polycarbonate Plastic
- Connection Material: Stainless Steel
- Temperature Range: -4° to 158° F
Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring. Install the app on your smart device, set your parameters, and monitor pressure and vacuum from up to 300 ft. away. Transmitters let you choose how often you’d like to receive the data. Connect them directly to your equipment with the threaded stem.
For the most precise readings, choose a transmitter that can read slightly above and below your system’s pressure and vacuum range. Transmitters will only provide accurate readings within the rated pressure or vacuum range.
Rated IP65, they're dust tight and are protected against washdowns.
Turn your transmitter into a portable system by adding a quick coupling (not included). Good for on-the-go monitoring, this lets you make fast, temporary connections to equipment in different locations.
For technical drawings and 3-D models, click on a part number.
| Pressure Range, psi | Vacuum Range, in. of Hg | Maximum Continuous Pressure, psi | Maximum Short-Term Pressure, psi | Wireless Range, ft. | Ht. | Wd. | Batteries Included | Environmental Rating | Manufacturer (Series) | Each | |
Bluetooth Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1/4 NPT Male | |||||||||||
| 0-14.5 | 29-0 | 14.5 | 29 | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 0000000 |
Wireless Pressure Transmitters
- For Use With: Air, Argon, Hydraulic Fluid, Nitrogen, Water
- Accuracy: ±1.5%
- Pipe Connection: See table
- Housing Material: Polycarbonate Plastic
- Connection Material: Stainless Steel
- Temperature Range: -4° to 158° F
Remotely track your system's pressure readings from the convenience of a smartphone or tablet. Good for preventative maintenance and route-based monitoring, these battery-powered transmitters use Bluetooth to alert you when equipment requires your attention. Install the app on your device, set your parameters, and monitor pressure from up to 300 ft. away. Transmitters let you choose how often you’d like to receive the data. Connect them directly to your equipment with the threaded stem.
For the most precise readings, choose a transmitter that can read above your system’s maximum pressure while still remaining close to it. Transmitters will only provide accurate readings within the rated pressure range.
Rated IP65, they're dust tight and are protected against washdowns.
Turn your transmitter into a portable system by adding a quick coupling (not included). Good for on-the-go monitoring, this lets you make fast, temporary connections to equipment in different locations.
For technical drawings and 3-D models, click on a part number.
| Pressure Range, psi | Maximum Continuous Pressure, psi | Maximum Short-Term Pressure, psi | Wireless Range, ft. | Ht. | Wd. | Batteries Included | Environmental Rating | Manufacturer (Series) | Each | |
Bluetooth Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
1/4 NPT Male | ||||||||||
| 0-150 | 150 | 225 | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 0000000 |
| 0-232 | 232 | 350 | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
7/16"-20 UNF Male | ||||||||||
| 0-1,500 | 1,500 | 2,250 | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
| 0-3,625 | 3,625 | 5,440 | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
| 0-5,800 | 5,800 | 8,700 | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
| 0-8,700 | 8,700 | 13,050 | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
Wireless Thermocouple Transmitters
Monitor your system’s temperatures directly from your smart device. These battery-powered transmitters send data to smartphones and tablets via Bluetooth, so you can easily confirm your processes are functioning properly. Good for route-based monitoring and preventative maintenance, they'll send alerts if equipment requires your attention. Install the app to set your parameters, choose how often you’d like to receive data, and monitor temperatures from up to 300 ft. away. Rated IP65, they’re protected against dust and washdowns.
Threaded-mount transmitters have probes to measure temperatures within pipes and tanks, producing more accurate readings than strap-mount transmitters.
Strap-mount transmitters can be installed almost anywhere with the included cable tie, so they’re good for equipment that might not have a threaded port available. However, because they mount externally, they are less accurate than threaded-mount transmitters.
Turn your transmitter into a portable monitoring system by adding a quick coupling (not included). This lets you make fast, temporary connections to various equipment in different locations.
For technical drawings and 3-D models, click on a part number.
Probe | Connection Type | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temperature Range, °F | Lg. | Dia. | Accuracy | Response Time, sec. | Pipe Size | Thread Size | Thread Type | Gender | Wireless Range, ft. | Ht. | Wd. | Batteries Included | Environmental Rating | Manufacturer (Series) | Each | |
Bluetooth Connection | ||||||||||||||||
Threaded Mount—17-4 Stainless Steel Probe | ||||||||||||||||
| -40° to 230° | 13/32" | 1/4" | ±3% | 1 | __ | 7/16"-20 | UNF | Male | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 0000000 |
| -40° to 230° | 13/32" | 1/4" | ±3% | 1 | 1/4 | __ | NPT | Male | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
| -40° to 230° | 3 3/8" | 1/4" | ±3% | 1 | __ | 7/16"-20 | UNF | Male | 300 | 2 3/4" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
| -40° to 230° | 3 3/8" | 1/4" | ±3% | 1 | 1/4 | __ | NPT | Male | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
Strap Mount | ||||||||||||||||
| -40° to 257° | __ | __ | ±5% | 1 | __ | __ | __ | __ | 300 | 2 5/16" | 2 7/16" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 000000 |
Wireless Humidity Transmitters
Use smartphones and tablets to monitor humidity and temperature within your system or facility. Connect these battery-powered transmitters to your smart device via Bluetooth, and receive data to ensure workplace conditions are suitable for processes, inventory, or personnel. Good for preventative maintenance and route-based monitoring, these transmitters let you choose how frequently you receive the data, and they’ll notify your device when humidity and temperature levels go outside of your thresholds. Download the app, set your parameters, and collect data from up to 300 ft. away. Rated IP65, they are protected against dust and washdowns.
Turn your transmitter into a portable monitoring system by attaching a quick coupling (not included). This allows fast, temporary connections for on-the-go measurements in different locations.
For technical drawings and 3-D models, click on a part number.
Relative Humidity | Temperature | Connection Type | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Accuracy | Range | Accuracy | Response Time, sec. | Pipe Size | Thread Type | Gender | Wireless Range, ft. | Ht. | Wd. | Batteries Included | Environmental Rating | Manufacturer (Series) | Each | |
Bluetooth Connection | |||||||||||||||
| 0 to 100% | ±5% | 14° to 185° F | ±1° F | 10 | 1/4 | NPT | Male | 300 | 2 11/16" | 1 7/8" | Yes | IP65 | Parker (Sensonode Blue) | 0000000 | 0000000 |
Handheld Machine-Monitoring Sensors
Acceleration, and
Temperature
Monitor the health of pumps, engines, and other rotating equipment from your wireless device. These battery-powered sensors measure velocity, acceleration, and temperature to help identify potential problems related to balance, alignment, and lubrication. Good for daily maintenance checks, they're battery powered and magnetic, so you can stick them on a machine, take a reading, and move to the next machine. They send readings using Bluetooth, which you can review in the field or offsite.
Install the app on your device and create profiles for multiple pieces of equipment—once created, you won’t have to enter information each time you want to do a maintenance check. Based on your machine profiles, the app will set default alarm thresholds. It will also recommend courses of action.
Sensors and replacement chargers cannot be sold to certain regions due to local energy efficiency regulations.
| Measures | Frequency Range, Hz | Velocity Range, in./sec. | Enveloping Acceleration Range | Operating System Compatibility | Height | Width | Depth | Temperature Range, °F | Batteries Included | Battery Charger Included | Environmental Rating | Specifications Met | Cannot Be Sold To | Each | |
| Acceleration, Temperature, Velocity | 10-1,000 | 0-2.17 | 0 gE-20 gE | Android 8.0 or Later, iOS 13.0 or Later | 5 1/4" | 1 3/4" | 1 3/4" | -5° to 140° | Yes | Yes | IP65 | CE Marked | CA, OR | 00000000 | 000000000 |
| Cannot Be Sold To | Each | |
| CA, VT | 00000000 | 0000000 |
| Each | ||
| 00000000 | 0000000 |