More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These screws are beveled under the head for use in countersunk holes.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

Brass screws are corrosion resistant in wet environments and electrically conductive.

18-8 stainless steel screws have good chemical resistance.

These steel screws have corrosion-resistant finishes.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These Phillips head screws have a decorative rounded top that provides a finished appearance.

18-8 stainless steel screws have good chemical resistance.

These steel screws are hot-dipped galvanized to resist corrosion in wet environments.

These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Also known as deck screws, these Phillips screws have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material.

Because these steel screws cut threads into drilled holes as they’re turned, they require less driving torque and cause less stress on material than thread-forming screws. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting boards.

18-8 stainless steel screws have good chemical resistance.

These Phillips head screws have a decorative rounded top that provides a finished appearance.

These steel screws are zinc plated to resist corrosion in wet environments.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Steel inserts have high strength for durability.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Hooked prongs give these inserts excellent holding power even when removing screws.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

Assortments include various sizes of tapping inserts for softwood.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

A closed end seals out elements and protects the threads on these inserts from debris.

Mount these inserts flush or below the material's surface.

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.