Cut wood, plywood, and particleboard.

Also known as dado-head blades, these are for cutting grooves in all types of wood.

Cut wood, plywood, and particleboard.

These blades have a heat-resistant coating to prevent material buildup.

Square-shaped teeth cut across the grain and with the grain (ripping) in reclaimed lumber and flooring with embedded nails.

Teeth vary in size, number per inch, and pattern to reduce vibration, so they create a smoother finish than Long-Life Band Saw Blades. They're also known as variable-set blades.

Make clog-free cuts in thick cross sections of steel, aluminum, brass, bronze, wood, and plastic. These blades have forward-angled teeth and plenty of space for chips to collect.

These carbon steel blades are good for making straight cuts.

Cut curves with these flexible carbon steel blades.

Made from flexible carbon steel, these blades cut curves.

Tooth size and number per inch are constant throughout the blade

Made from flexible carbon steel, these blades bend to cut curves.

Create a smoother cut than Long-Life Band Saw Blade Coil Stock—these blades have teeth that vary in size, number per inch, and pattern to reduce vibration. They're also known as variable-set blades.

Cut curves with these flexible carbon steel blades.

The teeth on these blades vary in size and pattern to reduce vibration and produce smooth cuts. They're also known as variable-set blades.

The teeth on these blades are carbide-tipped so they last longer than long-life blades with coated teeth.

Also known as demolition blades, these wide blades cut through multiple layers.

Tooth size and number per inch are constant throughout the blade.

Cut tight curves with a narrow blade. It's also known as a scroll-cutting blade.

Produce smooth cuts—the teeth vary in size and pattern to reduce vibration. They're also known as variable-set blades.

These blades have teeth that are coated in wear-resistant titanium nitride (TiN) so they last longer than blades with uncoated teeth.

These blades are stiffer than other blades for making straight cuts in wood.

Small, fine teeth at the shank end of this progressive-tooth blade gradually increase to larger teeth at the tip for fast cuts.

Tooth size and number per inch are constant throughout the blade.

The teeth on these blades are carbide tipped to last longer than bimetal blades.

The teeth at the shank end of this progressive tooth blade are small and fine and gradually increase to larger teeth at the tip for fast cutting.

Teeth progress from small and fine near the shank to larger near the tip for fast cutting.

Both the body and teeth on these blades are carbon steel.

Keep a convenient mix of T-shank jigsaw blades on hand.

Tooth size and number per inch are constant throughout the blade.

Teeth are ground into a forward angle for 30% more cutting power than long-life blades.

The teeth on these blades are designed to cut more quickly than other scroll saw blades.

Specially designed teeth cut faster than the teeth on standard hole saws.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

With two adjustable blades, these saws cut a variety of hole sizes in ceilings, walls, floors, and other surfaces made of drywall, plaster, plastic, and wood. To block flying chips and collect dust, they have a clear debris shield.

These saws have high-speed steel teeth.