System of Measurement System of Measurement |
---|
|
Screw Size Screw Size | Show |
---|
Screw Size Screw Size | Hide |
---|
Length Length |
---|

|
|
|
For Use In For Use In |
---|
|
Material Material |
---|
|
Threading Threading |
---|
![]() | Partially Threaded |
![]() | Fully Threaded |
Minimum Thread Length Minimum Thread Length |
---|
Drive Size Drive Size |
---|
|
Tapping Method Tapping Method |
---|
![]() | ![]() |
Thread Forming | Thread Cutting |
Softwood Drill Bit Size Softwood Drill Bit Size |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Tapping Screws
More
Steel Phillips Flat Head Screws for Wood

These steel screws are zinc plated to resist corrosion in wet environments. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
No. 12 | |||||||||||
3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 100 | 000000000 | 000000 |
1" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
1 1/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.75" | 100 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.25" | 100 | 000000000 | 00000 |
1 3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.375" | 100 | 000000000 | 00000 |
2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 100 | 000000000 | 00000 |
2 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.75" | 100 | 000000000 | 00000 |
3" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 100 | 000000000 | 00000 |
3 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2.5" | 100 | 000000000 | 00000 |
18-8 Stainless Steel Phillips Flat Head Screws for Wood

18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||||
No. 12 | |||||||||||
3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Fully Threaded | __ | 50 | 000000000 | 00000 |
1" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
1 1/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.864" | 25 | 000000000 | 0000 |
1 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
1 3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.167" | 25 | 000000000 | 00000 |
2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
2 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.667" | 10 | 000000000 | 0000 |
3" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
Super-Corrosion-Resistant 316 Stainless Steel Phillips Flat Head Screws for Wood

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Brass Phillips Flat Head Screws for Wood

Brass screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | |||||||||||
No. 12 | |||||||||||
3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 25 | 000000000 | 00000 |
1" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 25 | 000000000 | 00000 |
1 1/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.833" | 25 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
1 3/4" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.167" | 25 | 000000000 | 00000 |
2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 10 | 000000000 | 00000 |
2 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.667" | 10 | 000000000 | 00000 |
3" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 10 | 000000000 | 00000 |
3 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2.333" | 10 | 000000000 | 00000 |
Steel Square-Drive Flat Head Screws for Wood

Beveled under the head for use in countersunk holes, these steel screws press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
Black-oxide steel screws are mildly corrosion resistant in dry environments.
Zinc-plated steel screws resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Black-Oxide Steel | |||||||||||
No. 12 | |||||||||||
1 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 10 | 000000000 | 000000 |
2" | 0.412" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 5 | 000000000 | 0000 |
2 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.66" | 5 | 000000000 | 0000 |
3" | 0.412" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 5 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||||||
No. 12 | |||||||||||
1" | 0.412" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 50 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 50 | 000000000 | 00000 |
2" | 0.412" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 50 | 000000000 | 00000 |
2 1/2" | 0.438" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.66" | 25 | 000000000 | 00000 |
3" | 0.412" | 0.132" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 25 | 000000000 | 00000 |
Steel Slotted Flat Head Screws for Wood

These steel screws are zinc plated to resist corrosion in wet environments. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
No. 12 | ||||||||||
3/4" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 100 | 000000000 | 00000 |
1" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.66" | 100 | 000000000 | 0000 |
1 1/4" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.832" | 100 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.976" | 100 | 000000000 | 00000 |
2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 1.33" | 100 | 000000000 | 00000 |
2 1/2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 1.66" | 100 | 000000000 | 00000 |
3" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 2" | 50 | 000000000 | 0000 |
Brass Slotted Flat Head Screws for Wood

Brass screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | ||||||||||
No. 12 | ||||||||||
1" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 50 | 000000000 | 000000 |
1 1/4" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 0.833" | 25 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
Stainless Steel Slotted Flat Head Screws for Wood

18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
No. 12 | ||||||||||
2" | 0.438" | 0.132" | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 25 | 000000000 | 000000 |
Stainless Steel Slotted Oval Head Screws for Wood

18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. A decorative rounded top provides a finished appearance. Screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Screws may be mildly magnetic. Length is measured from the edge of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
No. 12 | ||||||||||
3/4" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 25 | 000000000 | 00000 |
1" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 25 | 000000000 | 00000 |
1 1/2" | 0.438" | 0.2" | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
Phillips Decorative Rounded Head Screws for Wood

A decorative rounded top provides a finished appearance. These screws press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Made from brass, they are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | |||||||||||
No. 12 | |||||||||||
1" | 0.408" | 0.153" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 25 | 000000000 | 000000 |
1 1/4" | 0.408" | 0.153" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 0.833" | 10 | 000000000 | 0000 |
1 1/2" | 0.408" | 0.153" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 10 | 000000000 | 0000 |
2" | 0.408" | 0.153" | No. 3 | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 10 | 000000000 | 00000 |
Steel Slotted Decorative Rounded Head Screws for Wood

These steel screws are zinc plated to resist corrosion in wet environments. A decorative rounded top provides a finished appearance. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||
No. 12 | ||||||||||
3/4" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 0.5" | 100 | 000000000 | 000000 |
1" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 100 | 000000000 | 00000 |
1 1/4" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 0.833" | 100 | 000000000 | 00000 |
1 1/2" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 100 | 000000000 | 00000 |
Brass Slotted Decorative Rounded Head Screws for Wood

Brass screws are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. A decorative rounded top provides a finished appearance. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Brass | ||||||||||
No. 12 | ||||||||||
1" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 0.667" | 50 | 000000000 | 000000 |
1 1/2" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 1" | 25 | 000000000 | 00000 |
2" | 0.408" | 0.153" | 7/64" | 1/8" | 11 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
Steel Phillips Drilling Screws for Joining Wood to Metal


These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation. Length is measured from the top of the head.
Screws with cutting wings drill a slightly larger hole in the wood to allow for expansion. The wings break off when they contact metal, so the screw can tap the remainder of the hole.
Zinc-plated steel screws resist corrosion in wet environments.
Corrosion-resistant-coated steel screws are a good choice for ACQ-treated (arsenic-free) lumber.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Screw Features | Drill Point Size | Drill Tip Lg. | For Metal Thick. | For Wood Thick. | Dia. | Ht. | Drive Size | Thread Size | Approximate Threads per Inch | Threading | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||||
No. 12 | ||||||||||||||
2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.5"-1.25" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | 10 | 000000000 | 000000 |
2 1/2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.5"-1.5" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | 10 | 000000000 | 00000 |
3 1/2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.75"-2.5" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | 5 | 000000000 | 0000 |
4" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.75"-2.625" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | 5 | 000000000 | 00000 |
Corrosion-Resistant-Coated Steel | ||||||||||||||
No. 12 | ||||||||||||||
1 5/8" | Cutting Wings | No. 4 | 7/16" | 0.13"-0.25" | 0.75"-1.125" | 0.476" | 0.25" | No. 3 | 12-24 | __ | Fully Threaded | 50 | 000000000 | 00000 |
1 3/4" | Cutting Wings | No. 4 | 3/4" | 0.06"-0.31" | 0.5"-0.75" | 0.54" | 0.165" | No. 3 | 12-24 | __ | Fully Threaded | 50 | 000000000 | 00000 |
2 1/4" | Cutting Wings | No. 4 | 1/2" | 0.13"-0.25" | 0.75"-1.375" | 0.438" | 0.16" | No. 3 | 12-24 | __ | Fully Threaded | 10 | 000000000 | 00000 |
2 3/4" | Cutting Wings | No. 4 | 1/2" | 0.13"-0.25" | 0.75"-1.625" | 0.438" | 0.16" | No. 3 | 12-24 | __ | Fully Threaded | 10 | 000000000 | 00000 |
3 5/8" | __ | No. 2 | 1 3/4" | 0.04"-0.15" | 0.75"-1.625" | 0.415" | 0.16" | No. 3 | __ | 14 | Fully Threaded | 25 | 000000000 | 00000 |
Stainless Steel Phillips Drilling Screws for Joining Wood to Metal

18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. They speed installation by drilling, tapping, and fastening wood and metal in a single operation. Length is measured from the top of the head.
Screws with cutting wings drill a slightly larger hole in the wood to allow for expansion. The wings break off when they contact metal, so the screw can tap the remainder of the hole.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Screw Features | Drill Point Size | Drill Tip Lg. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Galvanic Barrier Coated 18-8 Stainless Steel | ||||||||||||
No. 12 | ||||||||||||
1" | __ | No. 2 | 19/64" | 0.415" | 0.09" | No. 3 | 14 | Fully Threaded | __ | 10 | 000000000 | 00000 |
2 13/16" | Cutting Wings | No. 5 | 45/64" | 0.415" | 0.2" | No. 3 | 14 | Partially Threaded | 1 1/2" | 5 | 000000000 | 0000 |
Stainless Steel Rounded Head Screws for Plywood and Oriented Strand Board


These 316 stainless steel screws have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. They penetrate plywood and oriented strand board (OSB) without splitting. Threads are serrated for lower driving torque. Screws may be mildly magnetic. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
No. 12 | ||||||||||
1" | 0.416" | 0.145" | No. 3 | 3/16" | 16 | Fully Threaded | __ | 25 | 000000000 | 000000 |
1 1/2" | 0.416" | 0.145" | No. 3 | 3/16" | 16 | Partially Threaded | 3/4" | 25 | 000000000 | 00000 |
2" | 0.416" | 0.145" | No. 3 | 3/16" | 16 | Partially Threaded | 3/4" | 10 | 000000000 | 0000 |
18-8 Stainless Steel Square-Drive Screws for Softwood and Plastic-Wood Composites

18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. They have a curved neck that sinks into material, so they sit flush with the surface. Also known as deck screws, they have a Type 17 auger point that penetrates softwood and plastic-wood composite decking material. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||||
No. 12 | ||||||||||
2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1 1/4" | 25 | 000000000 | 000000 |
2 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 1.65" | 25 | 000000000 | 00000 |
3 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 2.31" | 10 | 000000000 | 0000 |
4" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 2.64" | 10 | 000000000 | 00000 |
4 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 2.97" | 10 | 000000000 | 00000 |
5 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 3.688" | 10 | 000000000 | 0000 |
6" | 0.43" | 0.203" | No. 3 | 7/64" | 7 | Partially Threaded | 3.96" | 10 | 000000000 | 00000 |
Super-Corrosion-Resistant 316 Stainless Steel Square-Drive
Screws for Softwood and Plastic-Wood Composites

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. They have a curved neck that sinks into material, so they sit flush with the surface. Also known as deck screws, they have a Type 17 auger point that penetrates softwood and plastic-wood composite decking material. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
No. 12 | ||||||||||
2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1 1/4" | 10 | 000000000 | 00000 |
2 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1.65" | 25 | 000000000 | 00000 |
3" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 1.98" | 25 | 000000000 | 00000 |
3 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.31" | 10 | 000000000 | 00000 |
4" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.64" | 10 | 000000000 | 00000 |
4 1/2" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 2.97" | 10 | 000000000 | 00000 |
5" | 0.43" | 0.203" | No. 3 | 7/64" | 11 | Partially Threaded | 3.3" | 10 | 000000000 | 00000 |