Filter by
Screw Size
Fastener Head Type
Drive Style
Countersink Angle
DFARS Compliance
About Tapping Screws
More
Steel Phillips Flat Head Screws for Wood
These screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
Zinc-plated steel screws resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
No. 24  | |||||||||||
| 2" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 1.333" | 10 | 000000000 | 000000 |
| 3" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 1.98" | 10 | 000000000 | 00000 |
| 4" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 2.667" | 5 | 000000000 | 00000 |
| 5" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 3" | 5 | 000000000 | 00000 |
| 6" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 3" | 5 | 000000000 | 00000 |