Aim light where it's needed most in areas that don't have an electrical outlet.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Use these with portable lights that use screw-in bulbs.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Create a high-intensity lighting system for inspecting small and microscopic parts.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as pendant lights, these fixtures hang from a cord.

Also known as turret lights, these fixtures have downlight reflectors to direct light.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

Suspend or mount with fasteners to the ceiling.

Mount lights in recessed spaces so the lens is flush with the wall.

These LED lights have an air-tight seal to protect against contaminants.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet.

The smooth stainless steel surface allows for easy cleaning.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

If the power goes out, you’ll find these flashlights right away.

Attach mini and full-size flashlights to a hard hat and keep your hands free to work.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

Turn a mini flashlight into a headlamp with these straps.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Clip these headlamps right into a mount on your tactical or rescue helmet.

Gently bend these single-use lightsticks to activate.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Hardwire these lights to a power source.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Also known as wall packs, these lights mount to exterior walls and ceilings.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

These lights swing out from the wall to illuminate loading docks and trailers.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Capture the extra-fine details you see under the magnifying lens in a photo or video.

Highlight fine details and defects on textured surfaces. These magnifiers cast light from an angle instead of from above like standard illuminated magnifiers.

Bend the flexible neck to any position and it will stay in place. A bright LED light emits an even, focused beam that's ideal for examining fine details on objects.

Bend the lamp and magnifying lens to any position—they’re mounted on separate arms for a flexible, hands-free set up.

Make fine details and defects on textured surfaces visible. With a weighted base, you can easily move these magnifiers around.

An extra-wide lens that’s curved on the viewing side ensures edge-to-edge clarity.

Spotlight fine details to find defects in parts or inspect dim machine interiors.

Switch between UV light and white light to catch defects you'd otherwise miss with these hand-held magnifiers.

About the size of a credit card, these magnifiers have a lens that slides out of the case to inspect items and equipment on the go. When you slide them open, a bright LED light automatically turns on, making it easier to see details. The lens corrects for distortion near the edge, giving you a crisp, clear view across the entire lens.

A mirror bounces light from a flashlight around your part, making defects pop against a dark background.

An LED on these loupes emits a focused, even beam so you don’t overlook any details.