Bring light to areas that don't have electrical power service. These lights have an impact-resistant plastic lens to protect their LEDs. No need to swap out disposable batteries—just charge these flashlights up and they’re ready to go.

Style A have a swiveling hook and magnetic back for flexible mounting options. You can fold away the hook when not in use. They cast a neutral light that’s often found in workspaces.

Style B are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. Good for inspecting, they have a cool appearance that highlights white and blue tones.

Point light where it’s needed—even in wet areas. These lights are sealed against splashing and dripping water. You won't need an outlet nearby because they're cordless, so you can bring them wherever you're working. They have a hook, a magnet at the base, or both, so you can attach them to nearby surfaces.

Styles A and B show colors more accurately than standard LEDs. Use them where color identification is critical, such as paint inspection and wiring. They’re durable enough to fall from 6 ft. and still work. Style B have a UV light that illuminates fluorescent dyes to track down leaks and spot surface contaminants more easily than with white light.

Styles C and D have a light on the end, so they can also be used as a flashlight. Their head swivels in addition to pivoting. Style C are dimmable.

Style E are small enough to fit in the palm of your hand, so it’s a cinch to carry and store them. They’re durable enough to fall from 6 ft. and still work. Choose from two lighting modes based on your situation: a floodlight for close-up tasks or a spotlight for long distances. They show colors more accurately than standard LEDs, so they’re great when color identification is critical, such as paint inspection and wiring. Their lens resists chemicals.

Styles F and G have a clip like a carabiner built into the base to secure them to racks, ladders, or other surfaces. Their head swivels in addition to pivoting.

Style H are rated IP65, so they also withstand sprays such as those from a garden hose. They have an aluminum body and an impact-resistant lens to protect against bumps and drops. A loop at one end works as a second handle, a ring for hanging, or as a kickstand to prop the light up. These lights come with both a 120V AC charger for a standard outlet and a 12V DC charger for charging in a vehicle.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style A have flexible mounting options. They have a hook on top and a hook on the back of the handle that you can rotate for different hanging orientations.

Style C throw focused light similar to a flashlight. They have a hook on the back of the handle.

Note: Battery life depends on the size of your battery.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it. They have a magnetic base to attach to most metal surfaces and can also be used as freestanding lights. You won’t be tethered to an outlet or extension cord, since they use battery power. A battery life indicator tells you how much charge you have left. Even while charging, you can still use the light, so your job isn’t on hold. Fold the head down to take up less storage space.

IP rated, these lights are sealed to keep out humidity and dripping and splashing liquids. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A are also IP rated for dust, so you can use them when sanding, grinding, and in other messy applications. They have a USB charger port for powering other things such as phones and earbuds. Style A with a hook can also be hung.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style A have a head that both pivots and rotates, so they’ll point light at any angle. For flexible mounting, they have a hanging hook, belt hook, and kickstand. You can also stick their magnetic back to metal surfaces.

Style C are our brightest option—they have four LEDs instead of one.

Style D have a 360° swiveling hook that locks in place so you can point light where it’s needed. Hang them on pipe up to 2" in diameter.

Note: Battery life depends on the size of your battery.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style A have magnets at both ends and on the back of the handle. Pop them onto magnetic surfaces or stick the magnetic hook on to hang them where they work best for you. The handle has an octagonal collar, so you can set them on their side without them rolling away.

Style B come with removable mounting attachments: a hook for hanging that also doubles as a kickstand when you fold it down and a magnetic clip for attaching them to most metal surfaces. Use the light on the top as a flashlight when all you need is a narrow beam.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Hang these lights where you need them on the job site.

Style A have a magnet on the back to attach these lights to most metal surfaces. The hook swivels, so you can aim the light where you need it. When you don’t need the hook, fold it away. These lights have an impact-resistant plastic lens to protect the LEDs. Some include an outlet to plug in a power tool or other device without running another extension cord.

Style B are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. An impact-resistant plastic lens protects the LEDs. The outlet at the end of the cord means these lights double as an extension cord for powering tools and other devices.

Style C have two hooks that swivel, so you can also hang them horizontally by putting both hooks on the same surface. You can attach them with the magnet to most metal surfaces. They have an impact-resistant plastic lens to protect the LEDs.

Style D have a steel guard to protect the bulb from bumps and scrapes. Use them with standard household screw-in LED bulbs. You can plug a power tool or other electrical device into the side of the handle to avoid running another extension cord.

Lights with an SJTOW cord resist oil and weather. Lights with an SJEOW cord resist oil and weather, and they’ll stay flexible in cold temperatures.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of these lights have a hook for hanging when you need both hands for other work.

Style A are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. Good for inspecting, they have a cool appearance that highlights white and blue tones. An impact-resistant plastic lens protects the LEDs. An outlet at the end of the cord means these lights double as an extension cord for powering tools and other devices.

Styles B and C have a swiveling hook, so you can aim light where you need it. Fold the hook away when not in use. They also have a magnet in back for mounting to metal. Ideal for inspecting, their daylight appearance highlights white and blue tones. A plastic lens resists impact to protect the LEDs. Mount the reel to your wall or ceiling using the included hardware. Style B can double as an extension cord for plugging in a power tool or other device.

Style D have a hook on the top and the bottom, so you can hang the light horizontally or vertically. Fold both hooks away when not in use. You can also mount these lights to metal with the removable magnet in back. Their daylight appearance highlights white and blue tones, so they’re ideal for inspecting. To protect the LEDs, they have an impact-resistant plastic lens. They come with hardware for mounting to your wall or ceiling.

Style E have a zinc-plated steel guard to protect the bulb. Use them with medium-base, screw-in LED bulbs (sold separately). They double as an extension cord—plug a tool or other device into the outlet on the handle. You can mount them to your wall or ceiling with the included hardware.

Style F run on just 6 volts between the cord reel and the light, so they’re safe for wet locations and other areas where 120 volts could be dangerous. Because of this, they comply with OSHA 29 1926.401 for safety in wet locations. They use an incandescent bulb, so they show the full spectrum of colors better than lights with LEDs. That means they’re ideal for dark spaces where color recognition is critical, such as when working with wiring.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces. A plastic lens keeps drops and dings from breaking the lights.

Style A and C hang from included hooks at each end.

Lights with an SJO cord resist oil. Lights with an SJOW cord resist oil and weather. Lights with an SJOOW cord resist oil better than lights with an SJO or SJOW cord, and they also resist weather.

Lights with an outlet included can be daisy chained together to avoid running separate extension cords. Connect up to 20 lights.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Style A have hooks on the top of each light head for hanging.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.

Style B have a domed, lantern-style top that diffuses light for 360° illumination. Place them next to your work or hang them up from their built-in hook. To protect against drops, they have four carrying handles that stick out to absorb impact. Control these floodlights with your device via Bluetooth by downloading the free app.

Style C double as a toolbox—the lights are built into the lid. It has two light heads that pivot to aim light where you need it. You can detach the lid and hang it up with the built-in hook. To conserve battery, these floodlights have seven brightness levels to choose from. They’ll also run on AC power with an extension cord (not included).

IP54-rated floodlights are sealed against humidity and splashing and falling liquids, so they’re good for the outdoors and other damp spaces. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

Brighten remote areas using the same battery as your other cordless Milwaukee tools. Since these lights run on a Milwaukee M18 battery (sold separately), you don’t need to have an outlet nearby. Their LEDs are protected by an impact-resistant polycarbonate lens.

Styles B and C cast diffused light in all directions and can switch to 90° of targeted illumination. They’ll also run on AC power with an extension cord (not included). Style B have a hook in the base to hang them.

Styles D and E have heads that tilt to direct light where you need it. You can mount them to the ceiling or a wall thanks to fastener mounts on the bottom. They’ll also run on AC power with an extension cord (not included). Style E send light in all directions when you pivot the panels all the way back. You can also mount them using the built-in hook or magnetic base.

All lights are protected from dirty, dusty conditions. IP54-rated lights are sealed against splashing liquid and humidity.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need. They’re also quick to set up and move elsewhere at a moment’s notice.

Style B have three LED panels that adjust up and down and side to side to aim light where you need it. The head detaches for use as a lantern. Fold out the hook to hang it up, or stick the magnetic base to a metal surface.

Style D are made with tough jobsites in mind. For impact resistance, the head is cushioned with rubber at the edges and has a tempered-glass lens. It’s also detachable and has been drop tested from 6 feet. Hang it from a pipe or rail with the steel-reinforced, extendable hook, or stick its magnetic base to a metal surface. The head adjusts to any angle to aim light exactly where you need it. To move these floodlights around, either carry them by the hook or fold them up and put them in their carrying case.

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Floodlights with a vehicle plug or wire leads can be operated as long as needed using an external power source, such as your truck’s battery. Vehicle plugs fit into a standard outlet or a 12V DC power source using the included adapters. Floodlights that cannot be sold to Canada are restricted due to energy efficiency requirements.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Style C have a handle that folds down for compact storage.

IP07-rated lanterns withstand temporary submersion, so they’ll still work if you drop them in water.