A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Because these lights have a reflector, they distribute light more evenly than other portable lights.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Create a high-intensity lighting system for inspecting small and microscopic parts.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

Direct light where it’s needed with these pivoting-head flashlights. When plugged in, they’ll automatically light up if the power goes out.

Attach these tiny flashlights to a grease gun nozzle or air hose to shine light directly onto your work.

The smooth stainless steel surface allows for easy cleaning.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They're rated for use in environments where hazardous material is present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Attach mini and full-size flashlights to a hard hat and keep your hands free to work.

Securely store your flashlight when not in use.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

Safe for use in environments where hazardous material is present.

Rated IP07, these headlamps withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

Gently bend these single-use lightsticks to activate.

Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

These lights fit into ceiling cutouts.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Also known as turret lights, these fixtures have uplight or downlight reflectors to direct light.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount lights in recessed spaces so the lens is flush with the wall.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

These lights swing out from the wall to illuminate loading docks and trailers.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Hardwire these lights to a power source.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Rated for use in damp locations, these lights withstand humidity and moisture.

Connect the battery pack to your existing fluorescent light to convert it into an emergency backup light.

No need for wiring—these lights plug-in with a two-prong plug.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

Use where electrostatic discharge is a concern.

Two LED bulbs illuminate your work.

Lock the adjustable arm into position to maintain a steady view even near vibrating machinery.

Textured surfaces and irregularities are more visible.

Fluorescent magnifiers produce a cool, even, white light.

An extra-wide lens that’s curved on the viewing side ensures edge-to-edge clarity.

Also known as Coddington magnifiers, these have grooved lens for an extremely clear view.

Get a clear, wide-angle view of remote areas without using a ladder.

Mounted on casters, these mirrors maneuver under and around machinery, vehicles, and other hard-to-reach areas.