Start with the workbench and then customize the interior by adding drawers and shelves.

These workbenches range in size from 25"-42" wide.

These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.

With their extra-smooth surface, these tops won’t trap dirt and oil.

Often used in laboratories, these tops resist chemicals, stains, scratching, and humidity.

An economical alternative to wood tops, these tops resist stains, oils, and chemicals.

With thick steel and an all-welded construction, a pair of legs can support up to 12,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.

These legs provide more leg room than other styles. Remove and reposition the bolts to adjust height in 1" increments.

These corrosion-resistant legs are often used in food-processing plants and laboratories.

These legs provide more leg room than other styles.

Store your heaviest tools and parts in these bases.

The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

These workbenches have plastic frames that won't rust or dent.

Stack these drawers under a workbench.

Keep tools visible and organized above a workbench.

Position these shelves at any angle.

Transform a fixed-height workbench into an adjustable-height workbench with one of these kits.

Prevent tools and parts from rolling off a workbench.

Mount these cabinets under a workbench to store larger items.

These workstations have almost twice the top capacity of our standard stand-up-height workstations.

With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments.

Mix and match components to design an office work area that can be reconfigured as needed.

The top compartment has a window that shields the monitor while providing a clear view of the screen.

Create a personalized work area by adding accessories. These workstations are often used for small-parts assembly.

Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing.

Add a work surface without taking up any floor space.

A lower shelf provides additional storage space. The durable steel top won't warp or splinter.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.

Welded for strength and stability, these tables support 3,000 to 5,500 lbs.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

Often used in laboratories, these tables stand up to repeated washdowns and won't corrode from grease and chemicals. Use them to elevate machinery and equipment up to 24" from the floor.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

Use these legs to make or repair a folding table.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Store and transport multiple folding tables.

Keep sawdust and other particles out of the air while drilling, sanding, and finishing wood products. Air blowers pull particles into the table through holes in the surface, making sure you don't breathe them.

With their compact size, these sawhorses are easy to store and transport.

Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.

Use cabinets individually, stacked, or connect side-by-side.

Use cabinets individually or stacked on top of compatible bench-height drawer cabinets.

These liners are treated to protect your tools against rust.

Cabinets are stackable with others of the same width and depth.

Protect your sensitive components from electrostatic damage.

Plastic cabinets and boxes won't dent, chip, or rust.

Carry multiple compartmented boxes at once using the built-in handle.

This cabinet is built to store your heaviest supplies, parts, and equipment.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Slide drawers, panels, and doors with these tracks and rollers.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Align and drill accurate holes in T-slotted rails with these reusable templates.

The drawer is divided into labeled compartments.

The compartments are sized to hold two reduced-shank drill bits and are marked with the bit size.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.

The hand crank on these tables has two speeds for fast and slow adjustment.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

For easy access to material, the tabletop rotates 360° and locks in any position.