Use these fittings in low-pressure flow applications. They have good corrosion resistance. Fittings rated for use with drinking water meet NSF/ANSI 61 safety standards.

For technical drawings and 3-D models, click on a part number.

These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.

Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

For technical drawings and 3-D models, click on a part number.

Made of CPVC, these fittings have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances. They meet NSF/ANSI 14 requirements for use in corrosive waste gravity-flow systems. Fittings are comparable to Corzan. They meet UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. They are IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.

Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

Warning: Never use plastic pipe fittings and pipe with compressed air or gas.

Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

For technical drawings and 3-D models, click on a part number.

PVC construction is lightweight and provides excellent corrosion resistance. Install them prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. Strainers have a threaded drain with a hex cap or plug that provides access to the screen without disconnecting your line.

Clear strainers allow you to monitor debris collecting in the screen.

Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.

Strainers with two union end connections come with two socket-connect pipe connections and two threaded pipe connections; union end connections allow for easy access to your pipeline.

For technical drawings and 3-D models, click on a part number.

Made of CPVC, these lightweight strainers have excellent corrosion resistance and withstand higher temperatures than all of our other plastic Y-strainers. They trap debris in your pipeline before it can enter sensitive equipment such as valves, pumps, and nozzles. Strainers have a threaded drain with a hex cap that provides access to the screen without disconnecting your line.

Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.

For technical drawings and 3-D models, click on a part number.

These irrigation polypropylene strainers have excellent corrosion resistance and are lightweight. Install them in your pipeline to trap debris and prevent damage to valves, pumps, nozzles, and other sensitive equipment. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

Install these strainers prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. They are designed for low-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. They are bronze for good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Strainers catch debris in your pipeline, preventing damage to valves, pumps, nozzles, and other sensitive equipment. They are designed for medium-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. They have good corrosion resistance.

Strainers with magnetic plug attract and catch ferrous particles.

For technical drawings and 3-D models, click on a part number.

Made of 316 stainless steel, these strainers have excellent corrosion resistance. They trap debris in your pipeline before it can damage sensitive equipment such as valves, pumps, and nozzles. They are designed for low-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. To connect, bolt strainers to a flange with the same pipe size.

For technical drawings and 3-D models, click on a part number.

316 stainless steel gives these strainers excellent corrosion resistance. Use them in medium-pressure applications to capture debris in your pipeline and protect sensitive equipment. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

A rugged iron body provides excellent strength and durability. Strainers prevent damage to valves, pumps, nozzles, and other sensitive equipment by catching debris in your pipeline. They are designed for low-pressure applications. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

With a higher temperature rating than other strainers, these can handle applications reaching 800° F. Install them prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. Strainers are designed for high-pressure applications. They are steel for excellent strength and durability. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

Made of rugged iron or steel, these strainers provide excellent strength and durability. Install them prior to valves, pumps, and nozzles to protect sensitive equipment from damage caused by debris. They are designed for medium-pressure applications. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

To achieve the maximum possible flow, internal components are designed to reduce flow resistance. These valves open to allow flow in one direction and close when flow stops or reverses. A removable cap provides easy access to internal components for maintenance.

Repair kits include everything you need to rebuild the valve.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Visually inspect flow and debris accumulation through the transparent valve body. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves open to allow flow in one direction and close when flow stops or reverses. They have a removable cap that provides easy access to internal components for maintenance.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.