Shape Shape |
---|
![]() | ![]() |
Wye | Double Wye |
![]() | |
Tee |
Connection Style Connection Style |
---|
![]() |
Threaded |
![]() |
Socket Connect |
![]() |
Clamp On |
Pipe Size Pipe Size | Show |
---|
|
For Use With For Use With |
---|
Gender Gender |
---|
|
Connection Type Connection Type |
---|
![]() | Pipe |
Maximum Pressure Maximum Pressure |
---|
|
Specifications Met Specifications Met |
---|
|
System of Measurement System of Measurement |
---|
|
Socket Depth Socket Depth |
---|
|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Environment Environment |
---|
|
Finish Finish |
---|
|
Class Class |
---|
|
Maximum Steam Pressure Maximum Steam Pressure |
---|
|
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Use these fittings for low-pressure applications in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT Female | |||||
---|---|---|---|---|---|
4 | 150 psi @ 72° F | 150 psi @ 350° F | Black-Coated Iron | 000000000 | 0000000 |
The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT Female | |||||
---|---|---|---|---|---|
4 | 150 psi @ 72° F | 150 psi @ 350° F | Galvanized Iron | 00000000 | 0000000 |
Use these fittings in gravity-flow applications both above and below ground. They are also known as no-hub pipe fittings and soil pipe fittings. To connect, place the end of the fitting against your pipe or another fitting and connect with a low-pressure clamp-on connector (sold separately). The clamp-on connector is also known as a no-hub coupling. Fittings are for use in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Each | |
4 | 0000000 | 000000 |
For Pipe Size | Lg. | Max. Pressure | Material | Sleeve Material | Each | |
4 | 3" | 15 psi @ 72° F | 304 Stainless Steel | Neoprene Rubber | 0000000 | 000000 |
For Pipe Size | For Copper Tube Size | Lg. | Max. Pressure | Material | Sleeve Material | Each | |
4 | 4 | 3" | 15 psi @ 72° F | 304 Stainless Steel | Neoprene Rubber | 0000000 | 000000 |
For Pipe Size | |||||||
---|---|---|---|---|---|---|---|
(A) | (B) | Lg. | Max. Pressure | Material | Sleeve Material | Each | |
4 | 3 | 3" | 15 psi @ 72° F | 304 Stainless Steel | Neoprene Rubber | 0000000 | 000000 |
Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Fittings that meet ASTM D1784, ASTM D1785, and ASTM D4066 adhere to specifications and testing requirements for material quality.
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Connect these fittings to Schedule 80 pipe–they have thicker, stronger walls than standard-wall fittings so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM D1784 specifications and testing requirements for material quality.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Socket Depth | Material | Color | Each | |
4 | 2 1/4" | PVC Plastic | Dark Gray | 00000000 | 0000000 |
Pipe Size | Socket Depth | Material | Color | Each | |
4 | 2 1/4" | PVC Plastic | Dark Gray | 00000000 | 0000000 |
Type | Each | |
Cement Adhesive for 6" Maximum Pipe Dia. | 00000000 | 00000 |
Made of CPVC, these fittings can handle high temperatures up to 200° F. They connect to Schedule 80 pipe and have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. Fittings have good corrosion resistance. They meet ASTM D1784 specifications and testing requirements for material quality. They are comparable to Corzan.
Fittings for drinking water meet NSF/ANSI Standard 61.
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications. Fittings are PVC, which has good corrosion resistance. They meet ASTM D1784 and ASTM D2665 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting. Long offset tees are also known as long radius wyes.
The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications. Made of high-density polyethylene (HDPE), they stand up to freeze/thaw cycles and resist corrosion and stress cracking. Fittings meet ASTM F667 specifications and testing requirements for material quality as well as soil conservation service (SCS) standards for use in underground drain lines.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas. Do not expose fittings to direct sunlight.
For technical drawings and 3-D models, click on a part number.
Elbows, tees, and wyes are corrugated inside and out, so they’re slightly bendable.
Pipe Size | Socket Dp. | Material | Color | Each | |
4 | 1 29/32" | Polyethylene Plastic | Black | 00000000 | 000000 |
These Schedule 40 fittings are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance. Fittings meet ASTM D2661, ASTM D3311, ASTM D3965, and ASTM F1498 specifications and testing requirements for material quality and product dimensions.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with ABS cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting. Long offset tees are also known as long radius wyes.
PVC construction is lightweight and provides excellent corrosion resistance. Install them prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. Strainers have a threaded drain with a hex cap or plug that provides access to the screen without disconnecting your line.
Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.
For technical drawings and 3-D models, click on a part number.
Strainers | Replacement Screens | Replacement Caps | Replacement Gaskets | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Lg. | Ht. | For Fitting Schedule | For Pipe Schedule | Features | Choose a Screen Opening Size | Each | Each | Each | Each | ||||
Dark Gray Strainer with PVC Plastic Screen | |||||||||||||||
4 | NPT | 12 13/16" | 11 3/4" | 80 | 80 | Threaded Drain with Hex Cap | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
Strainers | Replacement Screens | Replacement Caps | Replacement Gaskets | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Socket Connect Type | Lg. | Ht. | For Fitting Schedule | For Pipe Schedule | Features | Choose a Screen Opening Size | Each | Each | Each | Each | ||||
Dark Gray Strainer with PVC Plastic Screen | |||||||||||||||
4 | Cement | 12 13/16" | 11 3/4" | 80 | 80 | Threaded Drain with Hex Cap | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
Made of CPVC, these lightweight strainers have excellent corrosion resistance and withstand higher temperatures than all of our other plastic Y-strainers. They trap debris in your pipeline before it can enter sensitive equipment such as valves, pumps, and nozzles. Strainers have a threaded drain with a hex cap that provides access to the screen without disconnecting your line.
Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.
For technical drawings and 3-D models, click on a part number.