Xylene Pumps | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

Forward

How can we improve?

90 Products

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

About Drum Pumps

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Pumps that cannot be sold to Canada are restricted due to energy efficiency regulations.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Pipe Size		Overall						Maintenance Kits		Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Gender)	Discharge (Gender)	Lg.	Wd.	Ht.	Cannot Be Sold To		Each		Each		Each
120V AC, 208–240V AC, Single Phase—With Thermal Overload Protection
Hardwire
38	36	32	27	21	__	__	49	5	1/2	7.5/3.7-3.7	1 (Female)	3/4 (Male)	15 1/2"	9"	8 1/4"	__	0000000	000000000	00000000	00000	00000000	0000000
53	53	46	40	33	23	2	60	5	1	9.2/6.3-4.6	1 1/2 (Female)	1 (Male)	17 13/16"	9 1/8"	8 3/16"	__	0000000	00000000	00000000	0000	00000000	000000
208–240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
30	31	26	20	7	__	__	41	5	1/3	0.6/1.3-1.2	1 (Female)	3/4 (Male)	15 1/16"	9 1/4"	7 3/8"	__	0000000	000000	00000000	0000	00000000	000000
38	36	32	27	21	__	__	49	5	1/2	1.7/1.7-0.8	1 (Female)	3/4 (Male)	15 1/16"	9 1/8"	7 3/16"	__	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	1.1/3.3-2.2	1 1/2 (Female)	1 (Male)	16 9/16"	9 1/8"	7 3/8"	__	0000000	00000000	00000000	0000	00000000	000000
82	82	82	81	80	71	61	85	5	2	2.4/4.9-4.8	2 (Male)	1 1/2 (Male)	20 11/16"	10 3/8"	10"	Canada	0000000	00000000	00000000	00000	00000000	00000000
120	120	120	120	112	105	92	95	5	3	3.9/8-7.8	2 (Male)	1 1/2 (Male)	24 3/8"	11 1/2"	10 1/2"	__	0000000	00000000	00000000	00000	00000000	00000000

Circulation Pumps for Fuel and Flammable Liquid

Pump fuel and flammable liquids, such as isopropyl alcohol and xylene. These pumps have an explosion-proof motor that is rated for environments where hazardous material is present. Maximum temperature is 250° F or the boiling point of the liquid being pumped, whichever is lower. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

For technical drawings and 3-D models, click on a part number.

With Thermal Overload Protection

Pumps
	Flow Rate, gpm									Pipe Size		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.		Each		Each
120/208-240V AC, Single Phase—Hardwire
25	31	25	13	1	62	150	264	1/2	7.4/3.7	3/4	1/2	15 5/8"	10 7/8"	7 1/2"	0000000	000000000	00000000	0000000
208-240/460V AC, Three Phase—Hardwire
25	31	25	13	1	62	150	264	1/2	2.4-2.2/1.1	3/4	1/2	15 5/8"	10 7/8"	7 1/2"	0000000	00000000	00000000	000000
100	__	78	48	10	64	150	264	1	2.8/1.4	1 1/2	1	15 1/4"	10 7/8"	8 1/2"	0000000	00000000	00000000	000000

Maintenance Kit

00000000

Each

0000000

Without Thermal Overload Protection

Pumps
	Flow Rate, gpm									Pipe Size		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.		Each		Each
120/208-240V AC, Single Phase—Hardwire
15	__	10	4	__	46	150	264	1/3	4.8/2.4	3/4	1/2	15 1/2"	10 7/8"	7 1/2"	0000000	000000000	00000000	0000000
100	78	64	48	10	64	150	264	1	12/6	1 1/2	1	17 1/4"	10 7/8"	8 1/2"	0000000	00000000	00000000	000000
208-240/460V AC, Three Phase—Hardwire
115	__	100	90	60	81	150	264	1 1/2	5-4.6/2.3	1 1/2	1	16 3/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000
125	114	98	78	18	69	150	264	2	5.7-5.4/2.7	2	1 1/2	17 1/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000
140	__	__	120	47	75	150	264	3	8.1-7.6/3.8	2	1 1/2	17 1/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000

Maintenance Kit

00000000

Each

0000000

PTFE Air-Powered Transfer Pumps for Harsh Chemicals

With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered transfer pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Side Intake and Side Discharge

					Overall
Max. Flow Rate, gpm	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
231 Max. ft. of Head—100 psi Max. Discharge Pressure
2.5	4.8	1/8 Female	1/4 Female	1/4 Female	3 3/8"	5 1/2"	6 1/2"	000000	000000000
6.7	9.3	1/8 Female	3/8 Female	3/8 Female	3 1/2"	5 7/8"	7 5/8"	000000	00000000
16	29	1/4 Female	1/2 Female	1/2 Female	6"	9 3/16"	8"	000000	00000000
39	46	1/4 Female	1 Female	1 Female	8"	10 7/8"	10 3/8"	000000	00000000

Fluid-Side Maintenance Kit for 2925N1	Each	0000000
Air-Motor Maintenance Kit for 2925N1	Each	000000
Fluid-Side Maintenance Kit for 2925N4	Each	00000000
Air-Motor Maintenance Kit for 2925N4	Each	000000
Fluid-Side Maintenance Kit for 2925N2	Each	000000
Air-Motor Maintenance Kit for 2925N2	Each	000000
Fluid-Side Maintenance Kit for 2925N3	Each	000000
Air-Motor Maintenance Kit for 2925N3	Each	000000

Aluminum Air-Powered Transfer Pumps for Oil, Chemicals, and Fuel

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 Max. ft. of Head—125 psi Max. Discharge Pressure
15	12	10	7	10,000	20	1/4 Female	1/2 Female, 1/2 Female	1/2 Female, 1/2 Female	9"	10"	12"	0000000	000000000
45	38	30	19	20,000	40	1/2 Female	1 Female	1 Female	13"	10"	13"	0000000	00000000
106	77	62	45	30,000	50	3/4 Female	1 1/2 Female	1 1/2 Female	15"	17"	22"	0000000	00000000
150	104	76	53	40,000	100	3/4 Female	2 Female	2 Female	15"	17"	26"	0000000	00000000
235	174	127	90	50,000	140	3/4 Female	3 Female	3 Female	17"	20"	32"	0000000	00000000

Fluid-Side Maintenance Kit for 9948K21	Each	000000000
Air-Motor Maintenance Kit for 9948K21, 9948K23 and 9948K24	Each	000000
Fluid-Side Maintenance Kit for 9948K16	Each	000000
Air-Motor Maintenance Kit for 9948K16	Each	00000000
Air-Motor Maintenance Kit for 9948K19	Each	000000
Fluid-Side Maintenance Kit for 9948K19	Each	000000
Fluid-Side Maintenance Kit for 9948K24	Each	00000000
Fluid-Side Maintenance Kit for 9948K23	Each	00000000

Plastic Air-Powered Transfer Pumps for Fuel and Flammable Liquids

These pumps can be grounded to dissipate static electricity and are rated for use with flammable liquids such as gasoline, kerosene, isopropyl alcohol, and mineral spirits. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

With NPT Threaded Bottom Intake and Top Discharge

With Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 40 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connections (NPT)	Discharge Pipe Connections (NPT)	Lg.	Wd.	Ht.		Each
231 ft. of Head—100 psi Max. Discharge Pressure
4	3.5	2	1	5,000	6	1/4 Female	1/4 Female, 1/2 Male	1/4 Female, 1/2 Male	6"	7"	8"	00000000	0000000
6.5	5.5	4	2.75	3,000	5.5	1/4 Female	3/8 Female	3/8 Female	5"	8"	8"	00000000	000000
14	12	8	5	10,000	16	1/4 Female	1/2 Female, 1 Male	1/2 Female, 1 Male	7"	10"	12"	00000000	00000000

Air Motor Repair Kit for 13465K38	0000000	Each	000000000
Fluid Side Repair Kit for 13465K38	0000000	Each	000000
Air Motor Repair Kit for 13465K18	0000000	Each	000000
Fluid Side Repair Kit for 13465K18	0000000	Each	000000
Air Motor Repair Kit for 13465K25	00000000	Each	000000
Fluid Side Repair Kit for 13465K25	00000000	Each	000000

With NPT Threaded Side Intake and Discharge

With Side Intake and Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connections (NPT)	Discharge Pipe Connections (NPT)	Lg.	Wd.	Ht.		Each
288 ft. of Head—125 psi Max. Discharge Pressure
5.3	3.2	2.3	1.7	Not Rated	6.1	1/4 Female	1/4 Female, 3/4 Male	1/4 Female, 3/4 Male	7"	5"	7"	0000000	0000000

Aluminum Air-Powered Transfer Pumps for Fuel and Flammable Liquids

UL listed for pumping petroleum products and rated for use with flammable liquids, these pumps move diesel fuel, gasoline, kerosene, and mineral spirits. They can be grounded to dissipate static electricity. All have a pressure-relief valve set at 50 psi per UL 79 safety standard. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm									Overall
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head	@ 100 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
115 Max. ft. of Head—50 psi Max. Discharge Pressure
12	12	11.1	10.3	8.5	1,000	12	1/4 Female	1/2 Female	1/2 Female	8"	8"	12"	00000000	000000000
29	28	21	17	8	1,000	32	1/4 Female	1 Female	1 Female	8"	9"	13"	00000000	00000000
75	66	55	44	13	1,000	75	1/2 Female	1 1/2 Female	1 1/2 Female	15"	13"	20"	00000000	00000000
75	95	80	65	20	1,000	75	1/2 Female	2 Female	2 Female	15"	13"	20"	00000000	00000000

Air-Motor Maintenance Kit for 13455K36, 13455K37 and 13455K38	Each	000000
Fluid-Side Maintenance Kit for 13455K36	Each	000000
Fluid-Side Maintenance Kit for 13455K37 and 13455K38	Each	00000000
Fluid-Side Maintenance Kit for 13455K41	Each	000000
Air-Motor Maintenance Kit for 13455K41	Each	000000

Selectable-Flow-Rate Easy-Stroke Drum Pumps for Water and Chemicals

With Stainless Steel Intake Tube and Housing

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Whenever working with flammable liquids, always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	For Discharge Tube ID	Spout Type		Each
Stainless Steel Intake Tube and Housing
6, 8, 10, 12	15-55	2,000	Not Rated	140°	1 1/2 NPT, 2 NPT	Drum Connector	1 1/8"	18 1/2"-32 1/2"	11/16"	Removable	0000000	0000000

Air-Powered Drum Pumps for Water, Oil, Coolants, and Chemicals

These pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump. They're often used with ammonia, etching and cleaning solutions, and other caustics.

With NPT Discharge

			Temp. Range, °F						Air Connection			Intake		Discharge (Pump Body)
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Pipe Size	Gender	Thread Type		Each
14	55	1,500	-30°	300°	40-80	27	2 NPT	Drum Connector	1/8	Female	NPT	1 1/2"	39"	3/4	Female	NPT	00000000	0000000

Air-Powered Drum Pumps for Flammable Liquid

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Motor is nonsparking for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

For technical drawings and 3-D models, click on a part number.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID		Each
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	000000000
26	55	1,100	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	39"	Barbed	1"	0000000	00000000
53	55	1,000	-40°	210°	44-87	53	2 NPT	Drum Connector	3/8	Female	NPT	1 5/8"	47"	Barbed	1"	0000000	00000000

Replacement Hand Wheel	0000000	Each	000000
Replacement Coupling Kit	0000000	Each	00000

High-Pressure Air-Powered Drum Pumps for Fuel and Flammable Liquid

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Pipe Size	Gender	Thread Type		Each
4	55	7,500	40°	200°	0-150	10	2 NPT	Drum Connector	1/4	Female	NPT	2 1/8"	33 11/16"	3/4	Female	NPT	0000000	000000000

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include O-rings, valves, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
13	55	3,000	40°	210°	100	12	2 NPT	1/4	Female	NPT	1/2	Female	NPT	36"	1/2	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

Stainless Steel Extended-Life Air-Powered Drum Pumps for Chemicals

A stainless steel construction allows these pumps to be used with aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include balls, O-rings, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
28	55	8,000	40°	210°	100	40	2 NPT	1/4	Female	NPT	3/4	Female	NPT	39"	3/4	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

Hazardous Location Electric Drum Pumps for Water, Oil, Coolants, and Chemicals

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. They are often used with lubricating oil as well as with chemicals such as detergents and etching and cleaning solutions. Their electric motors are explosion proof and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Division 2, Groups F and G environments where flammable gases and combustible dust may be present.

Pumps
				Temp. Range, °F					Intake		Discharge					Maintenance Parts
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube Connection Type	For Tube ID	Thermal Protection		Each
120V AC, Single Phase
Hardwire
48.5	14	55	300	-40°	210°	1/2 hp	5.3	41 mm	1 5/8"	39"	Barbed	1"	With Thermal Overload Protection	00000000	000000000	00000000

Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals

Including nozzles and connectors, these pumps come with everything you need to start pumping. All include a pump assembly, 1" ID hose, dispensing nozzle, drum connector, and storage bracket.

Pumps with a 316 stainless steel housing are often used with fuel, acetone, methyl ethyl ketone (MEK), xylene, and mineral spirits. Their motors are rated IP55 and are CSA certified for use in Class I, Divisions 1 and 2, Group D hazardous environments with flammable gases and vapors.

Pumps with a 47" intake tube can be used with large totes and tanks.

For technical drawings and 3-D models, click on a part number.

				Temp. Range, °F					Intake		Discharge
Flow Rate, gpm	Discharge Pressure, psi	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Horsepower	Current, A	For Drum Opening Size	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.	Environmental Rating		Each
120V AC, Single Phase—Hardwire
316 Stainless Steel Housing
18	15	55	1,000	Not Rated	175°	1 1/3 hp	9.1	2 NPT	1 1/2"	39"	1"	1 1/4"	72"	NEC Class I Divisions 1, 2 Group D IP55	0000000	000000000
18	15	55	1,000	Not Rated	175°	1 1/3 hp	9.1	2 NPT	1 1/2"	47"	1"	1 1/4"	72"	NEC Class I Divisions 1, 2 Group D IP55	0000000	00000000

Email Us

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

About Drum Pumps

Extended-Life Plastic Circulation Pumps for Chemicals

Circulation Pumps for Fuel and Flammable Liquid

PTFE Air-Powered Transfer Pumps for Harsh Chemicals

Aluminum Air-Powered Transfer Pumps for Oil, Chemicals, and Fuel

Plastic Air-Powered Transfer Pumps for Fuel and Flammable Liquids

Aluminum Air-Powered Transfer Pumps for Fuel and Flammable Liquids

Selectable-Flow-Rate Easy-Stroke Drum Pumps for Water and Chemicals

Air-Powered Drum Pumps for Water, Oil, Coolants, and Chemicals

Air-Powered Drum Pumps for Flammable Liquid

High-Pressure Air-Powered Drum Pumps for Fuel and Flammable Liquid

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

Stainless Steel Extended-Life Air-Powered Drum Pumps for Chemicals

Hazardous Location Electric Drum Pumps for Water, Oil, Coolants, and Chemicals

Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals