Search Results
Thickness Thickness |
|---|
|
|
|
Length Length |
|---|
Diameter Diameter |
|---|
|
|
|
Shape Shape |
|---|
 |  |
| Sheet and Bar | 90° Angle |
 |  |
| Wire | Rod and Disc |
Fabrication Fabrication |
|---|
|
Hardness Hardness |
|---|
|
Yield Strength Yield Strength |
|---|
|
|
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
View a wire gauge conversion chart.
Zinc-Galvanized Low-Carbon Steel Sheets and Bars
These sheets and bars are zinc galvanized for good corrosion resistance. Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers.
Sheets
- Yield Strength: 40,000 psi
- Hardness: Rockwell B55 (Soft)
- Heat Treatable: No
- Specifications Met: ASTM A653
12" × 12" | 24" × 48" | 48" × 48" | |||||
|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | Each | |||
| 0.012" | 0" to 0.006" | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
| 0.015" | 0" to 0.006" | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.019" | 0" to 0.006" | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.024" | 0" to 0.008" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.036" | 0" to 0.008" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.046" | 0" to 0.01" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.071" | 0" to 0.016" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 0.096" | 0" to 0.018" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.112" | 0" to 0.018" | 00000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.13" | 0" to 0.018" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Bars
- Yield Strength: 30,000 psi
- Hardness: Rockwell B65 (Medium)
- Heat Treatable: No
- Specifications Met: ASTM A108
| Thick. | Thick. Tolerance | Wd. | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.008" to 0.008" | 1/8" | 0000000 | |||
| 1/8" | -0.008" to 0.008" | 3/4" | 0000000 | |||
| 1/8" | -0.008" to 0.008" | 1" | 0000000 | |||
| 1/8" | -0.008" to 0.008" | 1 1/4" | 0000000 | |||
| 3/16" | 0" to 0.003" | 3/16" | 0000000 | |||
| 1/4" | 0" to 0.003" | 1/4" | 0000000 | |||
| 5/16" | 0" to 0.003" | 5/16" | 0000000 | |||
| 3/8" | 0" to 0.003" | 3/8" | 0000000 | |||
| 1/2" | 0" to 0.003" | 1/2" | 0000000 | |||
| 5/8" | 0" to 0.003" | 5/8" | 0000000 | |||
| 3/4" | 0" to 0.003" | 3/4" | 0000000 | |||
| 1" | 0" to 0.003" | 1" | 0000000 |
Zinc-Galvanized Low-Carbon Steel 90° Angles
- Yield Strength: 36,000 psi
- Hardness: Rockwell B70 (Medium)
- Heat Treatable: No
- Specifications Met: ASTM A36
These 90° angles are zinc galvanized for good corrosion resistance. Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps and spacers.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | |||||||||
| 3/4" | -0.032" to 0.032" | 3/4" | -0.032" to 0.032" | 5/8" | 5/8" | 0000000 | |||
| 1" | -0.032" to 0.032" | 1" | -0.032" to 0.032" | 7/8" | 7/8" | 0000000 | |||
| 1 1/4" | -0.05" to 0.05" | 1 1/4" | -0.05" to 0.05" | 1 1/8" | 1 1/8" | 0000000 | |||
| 1 1/2" | -1/8" to 1/8" | 1 1/2" | -1/8" to 1/8" | 1 3/8" | 1 3/8" | 0000000 | |||
| 2" | -1/8" to 1/8" | 2" | -1/8" to 1/8" | 1 7/8" | 1 7/8" | 0000000 | |||
3/16" Wall Thick. (-0.008" to 0.008" Tolerance) | |||||||||
| 2" | -0.05" to 0.05" | 2" | -0.05" to 0.05" | 1 13/16" | 1 13/16" | 0000000 | |||
1/4" Wall Thick. (-0.008" to 0.008" Tolerance) | |||||||||
| 1 1/2" | -1/8" to 1/8" | 1 1/2" | -1/8" to 1/8" | 1 1/4" | 1 1/4" | 0000000 | |||
| 2" | -1/8" to 1/8" | 2" | -1/8" to 1/8" | 1 3/4" | 1 3/4" | 0000000 | |||
| 3" | -1/8" to 1/8" | 3" | -1/8" to 1/8" | 2 3/4" | 2 3/4" | 0000000 | |||
Zinc-Galvanized Steel Wire
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A641
This wire is zinc galvanized for good corrosion resistance. It will stay in place when bent and is commonly used for bundling and as tag wire.
| Dia. | Dia. Tolerance | Lg., ft. | Max. Temperature, °F | Weight, lb. | Container Type | Each | |
| 0.014" | -0.003" to 0.003" | 475 | 300° | 1/4 | Spool | 0000000 | 00000 |
| 0.014" | -0.003" to 0.003" | 1,910 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.014" | -0.003" to 0.003" | 9,565 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.014" | -0.003" to 0.003" | 19,130 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.016" | -0.003" to 0.003" | 355 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.016" | -0.003" to 0.003" | 1,425 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.016" | -0.003" to 0.003" | 7,145 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.016" | -0.003" to 0.003" | 14,290 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.018" | -0.003" to 0.003" | 285 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.018" | -0.003" to 0.003" | 1,140 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.018" | -0.003" to 0.003" | 5,720 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.018" | -0.003" to 0.003" | 11,440 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.023" | -0.003" to 0.003" | 175 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.023" | -0.003" to 0.003" | 705 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.023" | -0.003" to 0.003" | 3,540 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.023" | -0.003" to 0.003" | 7,085 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.029" | -0.003" to 0.003" | 110 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.029" | -0.003" to 0.003" | 455 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.029" | -0.003" to 0.003" | 2,290 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.029" | -0.003" to 0.003" | 4,580 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.035" | -0.003" to 0.003" | 77 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.035" | -0.003" to 0.003" | 305 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.035" | -0.003" to 0.003" | 1,545 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.035" | -0.003" to 0.003" | 3,095 | 300° | 10 | Spool | 0000000 | 00000 |
| 0.041" | -0.003" to 0.003" | 55 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.041" | -0.003" to 0.003" | 220 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.041" | -0.003" to 0.003" | 1,115 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.041" | -0.003" to 0.003" | 2,230 | 300° | 10 | Coil | 0000000 | 00000 |
| 0.048" | -0.003" to 0.003" | 41 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.048" | -0.003" to 0.003" | 165 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.048" | -0.003" to 0.003" | 830 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.048" | -0.003" to 0.003" | 1,660 | 300° | 10 | Coil | 0000000 | 00000 |
| 0.063" | -0.003" to 0.003" | 23 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.063" | -0.003" to 0.003" | 95 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.063" | -0.003" to 0.003" | 475 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.063" | -0.003" to 0.003" | 955 | 300° | 10 | Coil | 0000000 | 00000 |
| 0.080" | -0.003" to 0.003" | 14 | 300° | 1/4 | Spool | 0000000 | 0000 |
| 0.080" | -0.003" to 0.003" | 58 | 300° | 1 | Spool | 0000000 | 00000 |
| 0.080" | -0.003" to 0.003" | 290 | 300° | 5 | Spool | 0000000 | 00000 |
| 0.080" | -0.003" to 0.003" | 585 | 300° | 10 | Coil | 0000000 | 00000 |
| 0.106" | -0.003" to 0.003" | 33 | 300° | 1 | Coil | 0000000 | 0000 |
| 0.106" | -0.003" to 0.003" | 165 | 300° | 5 | Coil | 0000000 | 00000 |
| 0.106" | -0.003" to 0.003" | 335 | 300° | 10 | Coil | 0000000 | 00000 |
| 0.135" | -0.003" to 0.003" | 20 | 300° | 1 | Coil | 0000000 | 0000 |
| 0.135" | -0.003" to 0.003" | 100 | 300° | 5 | Coil | 0000000 | 00000 |
| 0.135" | -0.003" to 0.003" | 205 | 300° | 10 | Coil | 0000000 | 00000 |
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
| 0.014" | -0.003" to 0.003" | 300° | 50 | 0000000 | 00000 |
| 0.016" | -0.003" to 0.003" | 300° | 50 | 0000000 | 0000 |
| 0.018" | -0.003" to 0.003" | 300° | 50 | 0000000 | 0000 |
| 0.035" | -0.003" to 0.003" | 300° | 50 | 0000000 | 00000 |
| 0.041" | -0.003" to 0.003" | 300° | 50 | 0000000 | 00000 |
| 0.048" | -0.003" to 0.003" | 300° | 50 | 0000000 | 00000 |
| 0.063" | -0.003" to 0.003" | 300° | 25 | 0000000 | 0000 |
Zinc-Galvanized Low-Carbon Steel Rods
- Yield Strength: 30,000 psi
- Hardness: Rockwell B65 (Medium)
- Heat Treatable: No
- Specifications Met:
7/8" and 1" dia. rods: ASTM A36
All other sizes: ASTM A108
These rods are zinc galvanized for good corrosion resistance. Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.003" to 0.003" | 0000000 | |||
| 1/4" | -0.003" to 0.003" | 0000000 | |||
| 5/16" | -0.003" to 0.003" | 0000000 | |||
| 3/8" | -0.003" to 0.003" | 0000000 | |||
| 7/16" | -0.003" to 0.003" | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 0000000 | |||
| 5/8" | -0.003" to 0.003" | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 0000000 | |||
| 7/8" | -0.003" to 0.003" | 0000000 | |||
| 1" | -0.003" to 0.003" | 0000000 |