Filter by
Thread Size
Fastener Head Type
Drive Style
DFARS Compliance
Thread Spacing
Thread Type
Head Material
Press-Fit Captive Panel Screws
Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool. Screws become a part of the panel when installed, so they won't fall out and get lost. They're often used with surface mount nuts.
Zinc-plated steel bodies resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Outer Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Min. Thick. | Hole Dia. | Head Dia. | Head Ht. | Lg. | Screw Material | Head Material | Each | |
Zinc-Plated Steel Body | ||||||||
4-40  | ||||||||
| 0.036" | 0.219" | 0.417" | 0.3" | 0.191" | 430 Stainless Steel | Aluminum | 000000000 | 00000 |
6-32 | ||||||||
| 0.036" | 0.25" | 0.45" | 0.4" | 1/4" | 430 Stainless Steel | Aluminum | 000000000 | 0000 |
8-32 | ||||||||
| 0.036" | 0.313" | 0.51" | 0.4" | 1/4" | 430 Stainless Steel | Aluminum | 000000000 | 0000 |
10-32 | ||||||||
| 0.036" | 0.315" | 0.51" | 0.4" | 1/4" | 430 Stainless Steel | Aluminum | 000000000 | 0000 |
1/4"-20 | ||||||||
| 0.036" | 0.375" | 0.578" | 0.478" | 0.329" | 400 Series Stainless Steel | Aluminum | 000000000 | 0000 |