Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
Opening Pattern Opening Pattern |
|---|
 | Diamond |
Panel Construction Panel Construction |
|---|
|
Metal Panels
Close off openings in structures while allowing air to pass through.
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Raised panels have strands that overlap to provide a skid-resistant surface. Use them to create safety guards for equipment and machinery.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
304 Stainless Steel | ||||||
| 0.164" | 0.94" | 0.44" | 0.087" | 0.05" | 0000000 | 000000 |
| 0.164" | 0.94" | 0.44" | 0.087" | 0.062" | 0000000 | 00000 |
| 0.2" | 1.69" | 0.75" | 0.108" | 0.093" | 0000000 | 00000 |
| 0.2" | 1.75" | 0.81" | 0.106" | 0.062" | 0000000 | 00000 |
| 0.22" | 2.63" | 1.25" | 0.116" | 0.093" | 0000000 | 00000 |
| 0.22" | 2.75" | 1.25" | 0.115" | 0.062" | 0000000 | 00000 |
24" × 24" | ||||||
304 Stainless Steel | ||||||
| 0.164" | 0.94" | 0.44" | 0.087" | 0.05" | 0000000 | 00000 |
| 0.164" | 0.94" | 0.44" | 0.087" | 0.062" | 0000000 | 00000 |
| 0.2" | 1.69" | 0.75" | 0.108" | 0.093" | 0000000 | 00000 |
| 0.2" | 1.75" | 0.81" | 0.106" | 0.062" | 0000000 | 00000 |
| 0.22" | 2.63" | 1.25" | 0.116" | 0.093" | 0000000 | 00000 |
| 0.22" | 2.75" | 1.25" | 0.115" | 0.062" | 0000000 | 00000 |
48" × 48" | ||||||
304 Stainless Steel | ||||||
| 0.164" | 0.94" | 0.44" | 0.087" | 0.05" | 0000000 | 000000 |
| 0.164" | 0.94" | 0.44" | 0.087" | 0.062" | 0000000 | 000000 |
| 0.2" | 1.69" | 0.75" | 0.108" | 0.093" | 0000000 | 000000 |
| 0.2" | 1.75" | 0.81" | 0.106" | 0.062" | 0000000 | 000000 |
| 0.22" | 2.63" | 1.25" | 0.116" | 0.093" | 0000000 | 000000 |
| 0.22" | 2.75" | 1.25" | 0.115" | 0.062" | 0000000 | 000000 |
48" × 96" | ||||||
304 Stainless Steel | ||||||
| 0.164" | 0.94" | 0.44" | 0.087" | 0.05" | 0000000 | 000000 |
| 0.164" | 0.94" | 0.44" | 0.087" | 0.062" | 0000000 | 000000 |
| 0.2" | 1.69" | 0.75" | 0.108" | 0.093" | 0000000 | 000000 |
| 0.2" | 1.75" | 0.81" | 0.106" | 0.062" | 0000000 | 000000 |
| 0.22" | 2.63" | 1.25" | 0.116" | 0.093" | 0000000 | 000000 |
| 0.22" | 2.75" | 1.25" | 0.115" | 0.062" | 0000000 | 000000 |
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
304 Stainless Steel | ||||||
| 0.04" | 1" | 0.31" | 0.091" | 0.04" | 0000000 | 000000 |
| 0.048" | 2.75" | 1.06" | 0.119" | 0.048" | 0000000 | 00000 |
| 0.05" | 1" | 0.31" | 0.091" | 0.05" | 0000000 | 00000 |
| 0.05" | 1.81" | 0.75" | 0.118" | 0.05" | 0000000 | 00000 |
| 0.07" | 1.75" | 0.63" | 0.12" | 0.07" | 0000000 | 00000 |
| 0.079" | 2.63" | 1" | 0.121" | 0.079" | 0000000 | 00000 |
| 0.12" | 1.69" | 0.56" | 0.164" | 0.12" | 0000000 | 00000 |
24" × 24" | ||||||
304 Stainless Steel | ||||||
| 0.04" | 1" | 0.31" | 0.091" | 0.04" | 0000000 | 00000 |
| 0.048" | 2.75" | 1.06" | 0.119" | 0.048" | 0000000 | 00000 |
| 0.05" | 1" | 0.31" | 0.091" | 0.05" | 0000000 | 00000 |
| 0.05" | 1.81" | 0.75" | 0.118" | 0.05" | 0000000 | 00000 |
| 0.07" | 1.75" | 0.63" | 0.12" | 0.07" | 0000000 | 00000 |
| 0.079" | 2.63" | 1" | 0.121" | 0.079" | 0000000 | 00000 |
| 0.12" | 1.69" | 0.56" | 0.164" | 0.12" | 0000000 | 000000 |
48" × 48" | ||||||
304 Stainless Steel | ||||||
| 0.04" | 1" | 0.31" | 0.091" | 0.04" | 0000000 | 000000 |
| 0.048" | 2.75" | 1.06" | 0.119" | 0.048" | 0000000 | 000000 |
| 0.05" | 1" | 0.31" | 0.091" | 0.05" | 0000000 | 000000 |
| 0.05" | 1.81" | 0.75" | 0.118" | 0.05" | 0000000 | 000000 |
| 0.07" | 1.75" | 0.63" | 0.12" | 0.07" | 0000000 | 000000 |
| 0.079" | 2.63" | 1" | 0.121" | 0.079" | 0000000 | 000000 |
| 0.12" | 1.69" | 0.56" | 0.164" | 0.12" | 0000000 | 000000 |
48" × 96" | ||||||
304 Stainless Steel | ||||||
| 0.04" | 1" | 0.31" | 0.091" | 0.04" | 0000000 | 000000 |
| 0.048" | 2.75" | 1.06" | 0.119" | 0.048" | 0000000 | 000000 |
| 0.05" | 1" | 0.31" | 0.091" | 0.05" | 0000000 | 000000 |
| 0.05" | 1.81" | 0.75" | 0.118" | 0.05" | 0000000 | 000000 |
| 0.07" | 1.75" | 0.63" | 0.12" | 0.07" | 0000000 | 000000 |
| 0.079" | 2.63" | 1" | 0.121" | 0.079" | 0000000 | 000000 |
| 0.12" | 1.69" | 0.56" | 0.164" | 0.12" | 0000000 | 000000 |
V-Belts
