Voltage Voltage |
|---|
|
Battery Connection Type Battery Connection Type |
|---|
 |  |
| Post and Threaded Stud | Threaded Stud |
 | |
| Threaded Stud Inside Post |
Capacity Capacity |
|---|
|
Battery Chemistry Battery Chemistry |
|---|
|
Battery Type Battery Type |
|---|
|
System of Measurement System of Measurement |
|---|
|
Terminal Location Terminal Location |
|---|
 | D |
Depth Depth |
|---|
|
Cold Cranking Amps Cold Cranking Amps |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Manufacturer Equivalent Number ManufacturerEquivalent Number |
|---|
|
About Battery Disposal
More
Sealed Large-Cell Batteries for Starting and Continuous Use
Deliver a surge of power to start automobiles and other vehicles, and provide power over a long time. These batteries are deep cycle, so they can handle many charge/deep discharge cycles. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Manufacturer Equivalent Number | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Post and Threaded Stud | ||||||||||||
| 12V DC | 31 | 31M | D | 105 | 200 | 1,000 | 5/16"-18 | 9.4" | 12.9" | 6.8" | 00000000 | 0000000 |
Threaded Stud | ||||||||||||
| 12V DC | 31 | __ | D | 100 | 190 | 1,050 | 3/8"-16 | 9.5" | 13" | 6.8" | 00000000 | 000000 |
Large-Cell Batteries for Starting
 | Threaded Stud |
Terminal Location D |
Deliver a surge of power to start automobiles and other vehicles. These wet-cell batteries contain electrolyte in an unsealed container, so they must be mounted upright. They may occasionally need to be filled with distilled water.
Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Terminal Location | Cold Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Threaded Stud | |||||||||
| 12V DC | 31 | D | 925 | 5/16"-18 | 9.4" | 13" | 6.8" | 0000000 | 0000000 |
Large-Cell Batteries for Continuous Use
For use in floor-cleaning machines, lift trucks, personnel carriers, and other vehicles that require power over an extended time, these deep-cycle batteries can handle many charge/deep-discharge cycles. They are wet cell, so they contain electrolyte in an unsealed container and must be mounted upright. They may occasionally need to be filled with distilled water.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Threaded Stud Inside Post | |||||||||||
| 12V DC | 31M | D | 115 | 205 | 900 | 5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal) | 9.4" | 13" | 6.8" | 00000000 | 0000000 |