We will reply to your message within an hour.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
This material is precision ground to offer tighter tolerances than standard 316 stainless steel.
This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.
One side of these sheets is polished to either a brushed or mirror-like finish.
These rods have been passivated for enhanced corrosion resistance.
These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.
Bend this wire and it will stay in place. It's widely used as tying and locking wire.
Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.
This wire will spring back after bending. It's often used to make springs and wire rope.
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.
Slide these shims under the screw head to shorten the shoulder length.
Spin these shims onto screw threads to extend the shoulder length.
Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.
Send us a drawing, and we'll cut your custom shim.
A rounded bottom allows these keys to rock in their seat to relieve stress on the shaft caused by vibration or misalignment.
More corrosion resistant than 18-8 and 410 stainless steel threaded rods, these 316 stainless steel rods have excellent resistance to chemicals and salt water.
These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.
Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion.
Grade B8M threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
These hardened 316 stainless steel threaded rods are 40% stronger than standard Grade B8M threaded rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
Cut this stock to length to create the machine key you need. Straight keys, with a square or rectangular cross section, are the most common type of key. Install in a keyway to transmit torque from shafts to gears and other components.
Straight keys, with a square or rectangular cross section, are the most common type of key. Install them in keyways to transmit torque from shafts to gears and other components.
When installed, these keys fill oval keyways completely, reducing stress on the key and shaft. The rounded ends make it easy to slide gears, hubs, and other components into place. These are also known as feather keys.
Woodruff keys work well near shaft shoulders and on tapered shafts. These keys have a rounded shape that makes them easy to remove when parts need to be taken apart frequently. Use them in light duty applications to connect gears and other components to shafts. Also known as half moon keys.
Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.
Punch a hole to create a custom washer.
Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion.
Combine with a machine key to transmit torque to gears, sprockets, and other power transmission components.
These springs are more corrosion resistant than standard compression springs.
Made of stainless steel, these springs are more corrosion resistant than steel compression springs.
Made of stainless steel, these springs are more corrosion resistant than steel extension springs.
Trap small particles in low-flow applications—these sheets have tiny holes and small open area.
This wire cloth is commonly used to make strainers, filter screens, and sieves.
A convenient solution for inline filtering, discs are die cut for an exact diameter with smooth edges for use in tube, pipe, and duct.
Also known as bolting grade, this wire cloth has a large percentage of open area and ultra-thin wire to maintain flow. Use to sift and sort large quantities of dense nonabrasive materials.
Minimize clogs of dry powdered materials in sifting and sizing applications with this wire cloth, also known as milling grade.
Designed for use in food, pharmaceutical, and other sanitary environments, this precision wire cloth is sintered (fused together) to create a strong, smooth surface that’s free of crevices where contaminants can collect.
Often used in sieves and vibratory shakers for testing applications, the openings of this wire cloth are woven to a tight size tolerance for accurate, consistent sifting results.
The welded joints keep opening sizes uniform and prevent fraying as you bend this wire cloth.
Also known as Dutch weave, this wire cloth has a tight weave that traps tiny particles and provides strength for use in high-pressure and high-flow applications.
This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.
When your application does not require a smooth interior, this tubing is an economical choice.
This tubing is made to tighter tolerances than other stainless steel tubing.
This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.
A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.
The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.
Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.
This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.
Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.
This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.
Close off openings in structures while allowing air to pass through.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Serrated grooves grip the lip of the channel.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Keep hardware centered in the strut channel slot.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Support the corners of strut channel structures.
Produce complex metal parts quicker and with fewer tools and less wasted material than machining.
Unlike steel wool, this cut-to-length wool won’t leave behind small fibers that cause rust. Use on stainless steel.
Unlike steel wool, this wool won’t leave behind small fibers that cause rust. Use on stainless steel.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.
This wire rope provides a good balance of abrasion resistance and flexibility.
Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.