Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.

Spray a coating of this glue onto one surface to temporarily hold small parts.

Form bonds in 5 seconds or less.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

This glue remains flexible after curing to accommodate joint movement.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing.

With five temperature range options, these guns can dispense 3M adhesives with different melting points.

Dispense 3M hot-melt adhesives with these guns.

Prevent threaded fasteners from loosening due to shock and vibration.