We will reply to your message within an hour.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.
Step on this hose and it springs back to its original shape.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Yarn reinforcement gives this hose good strength under pressure.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi. Hose is not for use with gasoline.
To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.
These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.
Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.
Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.
Use this resilient tubing in high-temperature chemical applications up to 400° F.
Ultraviolet light won’t cause this tubing to degrade or deteriorate.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
The corrugated design allows this tubing to extend and compress just like an accordion.
Hard walls give this tubing excellent strength in high-pressure and vacuum applications.
Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.
You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.
A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.
Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.
This tubing can withstand high-temperature chemical applications up to 400° F.
An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.
With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.
This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.
The industry standard for fuel and lubricant applications, this tubing can be used intermittently with petroleum-based products without becoming hard or brittle.
Hard walls give this tubing the strength to handle high-pressure fuel and gasoline applications.
Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity tubing. Use in applications up to 450° F.
With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.
This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.
When your application does not require a smooth interior, this tubing is an economical choice.
A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.
This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.
This tubing is made to tighter tolerances than other stainless steel tubing.
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.
Compared to other stainless steel tubing, this tubing is harder, stronger, and more durable.
Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.
This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.
The outside of this tubing is polished to a high-luster finish for a shiny appearance.
This tubing has a 90° bend that holds its shape.
Aluminum tubing is lightweight with good corrosion resistance and weldability.
Bend this tubing into the shape you need without special tools or elbow fittings.
Unlike other aluminum tubing, this tubing is rigid and will not bend.
This tubing meets MIL-T-7081 standards.
Copper tubing has good corrosion resistance and excellent heat transfer qualities.
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing.
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It can be flared without splitting.
A thin layer of zinc yellow-chromate gives this tubing extra corrosion resistance, making it an economical alternative to stainless steel.
This tubing can withstand temperatures up to 1200° F—the highest temperature rating of all the non-stainless steel tubing we offer. It is also known as Inconel.
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.
When your application does not require a smooth interior, this tubing is an economical choice. It has a weld bead on the inside.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kits contain lengths of hose, nozzles, valves, and caps.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kit contains lengths of hose, nozzles, connectors, and assembly pliers.
This hose is made of steel.
Draw coolant from your existing tank.
Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
These dispensers have a reservoir and controls for coolant flow.
These nozzles handle coolant pressure up to 150 psi.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.
Press these nozzles into unthreaded holes.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.