Use these connectors in general purpose residential and commercial applications.

These receptacles are for light-duty use.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Charge mobile devices without an adapter.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Also known as hospital-grade receptacles, these have an extra-tight fit when mated to withstand high vibration. They prevent damage to electronic equipment caused by spikes in current. Mount to DIN rail.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Rated NEMA 6P and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns and are corrosion-resistant so they can be used in high-vibration marine environments.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

These connectors are often used with 18 mm and 30 mm proximity switches and limit switches.

The largest signal/power connectors we offer, these are often used with conveyors, cooling fans, and grinders.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

These connectors withstand corrosion, abrasion, and welding slag. Screw them together for a secure connection. They're often used with 12 mm proximity switches, valves, and power supply units.

The smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.

Use these sockets with Allen-Bradley servomotor systems.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC and ANSI/AAMI (Association for the Advancement of Medical Instrumentation) standards for use with medical devices.

There’s no need for multiple adapter cords or converters, simply swap out the input plugs on these cords to match the outlets of the region you’re in. Use these adapter cords to run DC-powered devices from an outlet in a variety of different countries.

Power devices that require less than 120 volts AC.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Connect multiple devices from a single outlet.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Add grounding or surge suppression protection.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

A single row of terminals fits in narrow spaces.

Blocks are made of ceramic to withstand elevated temperatures.

Use with DIN 2 rail. Add as many circuits as you need with these terminal blocks and accessories.

Blocks are made of ceramic to withstand elevated temperatures.

The spring-clamp terminals on these blocks make wire installation faster than with other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Blocks mount in a cutout and have terminals on both sides.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Change the M8 8-pin connection on your Schunk gripper to wire leads for hardwiring robots that don’t have an M8 8-pin connection.