We will reply to your message within an hour.
More
Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.
Choose these washers for their adherence to strict military standards for material and construction.
SAE washers generally have a smaller ID and OD than USS washers.
Also known as Type B washers, ASME washers are available in narrower and wider diameters than SAE and USS washers.
USS washers generally have a larger ID and OD than SAE washers.
These washers come with a traceable lot number and a physical and chemical test report.
Designed for use with structural screws, studs, and nuts, these washers are often used for construction and exterior building applications.
These thick washers are designed to support structural screws, studs, and nuts.
Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.
These plastic washers are good electrical insulators.
These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.
These metric washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.
These washers are excellent electrical insulators.
Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments.
Low moisture absorption and good heat resistance make these metric washers suitable for wet and harsh environments.
These washers can withstand temperatures up to 450° or 500° F without degrading.
These metric washers can withstand temperatures up to 450° or 500° F without degrading.
These washers hold up in blistering temperatures up to 3000° F.
These metric washers hold up in blistering temperatures up to 3000° F.
Mica washers withstand temperatures up to 1050° F.
Peel the backing off these washers and stick them onto a surface for easy mounting and assembly.
Made from neodymium, these washers stay in place on iron and steel surfaces for easy mounting and installation.
Designed for use with plastic screws, these acetal washers are good electrical insulators. They are excellent for use under water and in rotating assemblies.
Sunlight, ozone, and water won’t affect these washers.
These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.
Made of durable material, these washers resist wear from rubbing and scraping surfaces.
These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.
Also known as crush washers, these compress when tightened to form a tighter, more durable seal than rubber washers. They are commonly used to seal fluids such as oil and fuel.
Made of fiber, these washers create a seal with minimal torque and reseal better than copper and aluminum washers.
These SBR rubber washers are reinforced with cloth fibers.
These leather washers are nonmarring.
These wool felt washers can be soaked with oil to lubricate joints.
These polyurethane washers withstand wet conditions as well as sunlight, ozone, and some chemicals.
Naturally slippery and wear resistant, acetal spacers also offer some resistance to moisture.
These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.
Also known as crush washers, the washers in these assortments compress when tightened to form a tight, durable seal that prevents leaks.
These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.
These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.
Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.
These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.
Use where high loads and speeds are not required.
Stop corrosion caused by battery acid fumes leaking at the posts of battery terminals.
A wide two-piece body holds more debris than other plastic Y-strainers. The body comes apart for easy cleaning without disconnecting your line.
The magnetic base mounts to your work surface and has a control valve for adjusting airflow.
These nozzles are made of FDA-listed materials.