About Plastic
More
About Paint and Protective Coatings
More
Clear Cellulose Film
- Color: Clear
- Maximum Temperature: 212° F
- Tensile Strength: 1900 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Also called acetate, this is the same clear film that's used in window envelopes. Choose cellulose when you need a low-cost plastic with good clarity.
Office Tape
Use these tapes for light duty mending and holding.
Scotch Magic 810 tape is made of cellulose that becomes as clear as glass upon application. It has an ink-receptive surface that allows you to write on it.
Scotch Double-Sided tape comes with a dispenser and has adhesive on both sides.
| Wd. | Overall Thick. | Material | Temp.Range, °F | Adhesive Type | Features | Color | Lg., ft. | Each | |
Short Roll | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Adhesive on One Side | |||||||||
3M Scotch Magic 810 with Dispenser | |||||||||
| 3/4" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 54 | 0000000 | 00000 |
3M Scotch Magic 810 | |||||||||
| 1/2" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 108 | 00000000 | 0000 |
| 3/4" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 108 | 00000000 | 0000 |
Adhesive on Both Sides | |||||||||
3M Scotch Double-Sided with Dispenser | |||||||||
| 3/4" | 0.002" | Cellulose Plastic | 40° to 170° | Acrylic | __ | Clear | 25 | 000000 | 0000 |
Long Roll | |||||||||
Adhesive on One Side | |||||||||
3M Scotch Magic 810 | |||||||||
| 1/2" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 216 | 00000000 | 0000 |
| 3/4" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 216 | 00000000 | 0000 |
| 1" | 0.002" | Cellulose Plastic | 60° to 80° | Acrylic | Ink-Receptive Surface | Clear | 216 | 00000000 | 0000 |
Abrasion-Resistant Reusable Peel-Away Coatings for Metal
Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.
Solvent-based coatings won’t dry out, even when stored over a long time.
Water-based coatings are the most durable peel-away coatings we offer.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Indoor Protection Time, yrs. | Composition | Touch, sec. | Overall, min. | Approx. Coverage @ Thick. | Melting Temp., °F | Specifications Met | For Use On | Color | 1 lbs. | 5 lbs. | 10 lbs. | |
| Not Rated | Solvent Based | 90 | 4 | 3 sq. ft. @ 1/16" | 360° | MIL-P-23242 | Steel, Iron | Clear | 0000000 | |||
| 10 | Water Based | 60 | 5 | 3 sq. ft. @ 100 mil | 350° | __ | Steel, Iron | Clear | 0000000 | |||