Manufacturer Manufacturer | Show |
|---|
|
For Joining For Joining |
|---|
|
For Use On For Use On |
|---|
Container Type Container Type |
|---|
 | Cartridge |
Formulation Formulation |
|---|
|
Consistency Consistency |
|---|
|
Type Type |
|---|
|
Shear Strength Shear Strength |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Color Color |
|---|
 | Gray |
 | Light Yellow |
Cure Type Cure Type |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Adhesive Type Adhesive Type |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
Connection Type Connection Type |
|---|
|
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
MA310 bonds dissimilar materials.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| MA300 | 30500 | 1.58 | Cartridge | 4 min. | 24 hrs. | 3,000 | 35 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Plastic, Composites, Masonry, Wood | 00000000 | 000000 |
| MA310 | 31500 | 1.58 | Cartridge | 15 min. | 24 hrs. | 3,000 | 15 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood | 00000000 | 00000 |
Acrylic Structural Adhesives
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
IT194 is nonsagging, so it won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plexus Adhesives | |||||||||||||
| IT194 | 1.18 | Cartridge | 4 min. | 24 hrs. | 2,000 | 30 | 10:1 | Gel (96,140 cP) | -40° to 180° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |