Backing Type Backing Type | Show |
|---|
 | Adhesive |
System of Measurement System of Measurement |
|---|
|
Shape Shape |
|---|
 |  |
| Foil | Sheet and Bar |
Material Material |
|---|
|
Appearance Appearance |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
Hardness Hardness |
|---|
|
Temper Rating Temper Rating |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Fabrication Fabrication |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Temper Temper |
|---|
|
About Stainless Steel
More
About Aluminum
More
Polished Multipurpose 304 Stainless Steel
Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The polished surfaces are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Foil, sheets, bars, and strips are polished on one side. Adhesive-back foil has an acrylic adhesive on the unpolished side.
- Yield Strength: 30,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A240
Easy-to-Form Pure 1100 Aluminum Sheets and Bars
Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.” The foil is often used as a wrap, cover, mask, or patch; the black foil eliminates reflections.
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Rolled
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Adhesive Type | Each | |
6" × 100 ft. | ||||||
|---|---|---|---|---|---|---|
| 0.0020" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 0000000 |
6" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 50 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
EMI-Shielding Nickel Alloy
- Yield Strength: 35,000 psi
- Hardness: Not Rated
- Temper Rating: Softened (Annealed)
Use this nickel-iron-cobalt alloy as a magnetic shield to protect electronic equipment from EMI/RFI interference.
| Thick. | Thick. Tolerance | Wd. | Lengths, ft. | Adhesive Type | Specifications Met | Per Ft. | |
Adhesive Back | |||||||
|---|---|---|---|---|---|---|---|
| 0.002" | -0.0002" to 0.0002" | 4" | Rubber | ASTM A753 | 0000000 | 000000 | |
| 0.004" | -0.0004" to 0.0004" | 4" | Rubber | ASTM A753 | 0000000 | 00000 | |
| 0.004" | -0.0004" to 0.0004" | 15" | Rubber | ASTM A753 | 0000000 | 00000 | |
| 0.006" | -0.0006" to 0.0006" | 4" | Rubber | ASTM A753 | 0000000 | 00000 | |
| 0.006" | -0.0006" to 0.0006" | 15" | Rubber | ASTM A753 | 0000000 | 000000 | |
| 0.01" | -0.001" to 0.001" | 4" | Rubber | ASTM A753 | 0000000 | 00000 | |
| 0.01" | -0.001" to 0.001" | 15" | Rubber | ASTM A753 | 0000000 | 000000 | |