Form bonds with twice the strength of our other spray contact adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

Join polyethylene, polypropylene, and other plastics standard acrylics can't join.

Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Take your time to precisely align parts before bonding, and maintain flexibility afterward. These adhesives won't harden until you expose them to a compatible light source. They also remain elastic so the bond can bend without breaking.

Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard acrylics. Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.

Improve instant-bond adhesive performance on hard-to-bond slippery plastics.

These spray contact adhesives adhere quickly. Spray a thin, uniform coating on one surface, air dry, and then bring together to bond.

For easy positioning, these adhesives remain tacky for hours. Once items are in place, apply pressure to create a permanent bond. The blue color shows where adhesive has been applied.

Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.

Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments. They resist moisture, salt, and chemicals, so you can use them in corrosive oil, marine, and mining applications. These compounds can also be used within autoclaves. Because they are epoxies, they are rigid, resist wear, and create excellent electrical insulation. They withstand a wide range of temperatures, and this formulation won’t crack or split as components heat up and cool down.

They come in a cartridge, so you can apply them precisely. To dispense, they require a mixer nozzle and gun (both sold separately).

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.