About Structural Adhesives
More
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
HighHeat | 8297 | 2 | Stick | 60 min. | 8 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 450° | Gray | Metal, Plastic, Rubber, Composites, Masonry | 000000 | 000000 |
PlasticWeld | 8237 | 2 | Stick | 20 min. | 24 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 300° | Off-White | Plastic, Rubber, Composites, Masonry | 000000 | 0000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
50132 works especially well on plastics and composites.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Yellow | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Max. Temperature, °F | For Joining | Each | |
Original | 50165 | 0.85 | Syringe | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (150,000 cP) | 550° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 00000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
MarineWeld | 50172 | 0.85 | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 00000 |
Epoxy Structural Adhesives for Harsh Environments
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
Adhesives | |||||||||||||
1.69 fl. oz. | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (7,000 cP) | -50° to 350° | Amber | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites | 000000 | 000000 |
1.69 fl. oz. | Cartridge | 40 min. | 24 hrs. | Not Rated | Not Rated | 2:1 | Thick Liquid (10,000 cP) | -65° to 350° | White | Corrosive, Salt Spray, Submersible | Metal, Metal to Plastic, Plastic | 000000 | 00000 |
Epoxy Structural Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Includes | Each | |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 000000 |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,500 cP) | -50° to 350° | Amber | Plastic | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution | 0000000 | 000000 |
1.69 | Cartridge | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,500 cP) | -50° to 350° | Amber | Plastic | 1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays | 0000000 | 000000 |
1.69 | Cartridge | 90 min. | 72 hrs. | Not Rated | Not Rated | 1:1 | Thick Liquid (6,000 cP) | -85° to 270° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 00000 |
48 | Bottle | 30 min. | 24 hrs. | 360 | Not Rated | 2:1 | Thick Liquid (9,000 cP) | -50° to 350° | Amber | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass | __ | 000000 | 000000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Flexible Light-Activated Instant-Bond Adhesives
These adhesives stay pliable for flexible bonds that resist cracking. For easy positioning, they begin to harden only when exposed to light.
1700A257 and 2454N1 fluoresce under UV light for easy inspection.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Light Intensity Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Adhesives | |||||||||||||
1.69 | Bottle | 0.25" | 5 sec. | 30 min. | 5 sec. @ 100 mW/cm2 | UV Light | Thin Liquid (850 cP) | Not Rated | 45° to 80° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | 000000 | 000000 |
Spray Adhesives
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Net Weight, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
77 | 13.44 | 21 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 000000 | 000000 |
77 | 16.8 | 26 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | White | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77CA | 18 | 28 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | __ | 0000000 | 00000 | 00000 |
94ET | 19.8 | 31 sq. ft. @ 2.5 gm/ft² | No | 10 min. | 24 hrs. | 300 | 0° to 210° | Clear | Ceramic, Composites, Glass, Metal, Plastic | __ | 0000000 | 00000 | 00000 |
High-Strength Spray Adhesives
Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Temp. Range, °F | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Net Weight, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Min. | Max. | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | ||||||||||||||
90 | 12.23 | 19 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° | 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 0000000 | 000000 | 000000 |
90 | 17.6 | 27 sq. ft. @ 2.5 gm/ft² | Yes | 60 sec. | 24 hrs. | 600 | 0° | 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | CA | 00000000 | 00000 | 00000 |
90CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 60 sec. | 24 hrs. | 600 | 0° | 250° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber | __ | 0000000 | 00000 | 00000 |
Glue-on-a-Roll
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.
467MP and 468MP resist solvents and UV rays.
9482PC and 9485PC bond well to slippery plastics. They're reinforced with fiber for stability.
Mfr. Model No. | Wd. | Lg., yd. | Thick. | Temp. Range, °F | Color | For Joining | Each | |
3M Glue | ||||||||
---|---|---|---|---|---|---|---|---|
468MP | 1/2" | 60 | 0.005" | -40° to 300° | Clear | Cardboard, Ceramic, Composites, Foam, Glass, Metal, Plastic, Wood | 0000000 | 000000 |
468MP | 1" | 60 | 0.005" | -40° to 300° | Clear | Cardboard, Ceramic, Composites, Foam, Glass, Metal, Plastic, Wood | 0000000 | 00000 |
9482PC | 1/2" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
9482PC | 3/4" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
9482PC | 1" | 60 | 0.002" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
9485PC | 1/2" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
9485PC | 3/4" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
9485PC | 1" | 60 | 0.005" | Not Rated to 250° | Clear | Plastic | 0000000 | 00000 |
High-Temperature Glue-on-a-Roll
This silicone glue withstands high temperatures and bonds slippery plastics. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.
0.001" Thick. | 0.002" Thick. | |||||||
---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Temp. Range, °F | Color | For Joining | Each | Each | ||
1/4" | 60 | -100° to 500° | Clear | Plastic | 00000000 | 000000 | 00000000 | 000000 |
1/2" | 60 | -100° to 500° | Clear | Plastic | 00000000 | 00000 | 0000000 | 00000 |
3/4" | 60 | -100° to 500° | Clear | Plastic | 00000000 | 000000 | 0000000 | 000000 |
1" | 60 | -100° to 500° | Clear | Plastic | 00000000 | 000000 | 0000000 | 000000 |
Primers for Instant-Bond Adhesives
Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Primers in brush-top bottles also include a spray head for easy dispensing.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Drying Time, sec. | Consistency | Viscosity, cP | Color | Cannot Be Sold To | Each | |
Loctite® Primers | |||||||||
7701 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | Clear | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 |
770 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
770 | 16 | Can | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
Thin Film and Label Application Primers
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films. These primers float adhesive-backed sheets above a surface until you press them down, giving you time to position the sheet and remove any wrinkles. Since the sheet doesn’t stick right away, you can apply large sheets without needing a second pair of hands. These primers also work with non-adhesive films. Even in hot or cold temperatures, your sheet will stay put.
Clean the mounting surface with primer before applying a film, so no residue is trapped underneath. Use a smoothing tool (sold separately) to squeeze out air bubbles and excess fluid. Drying time depends on application—most decals and films will dry within 90 seconds, but 3D printer sheets should dry for 24 hours before printing.