Choose a Category
Usable Length Usable Length |
|---|
End Type End Type |
|---|
 |  |
| Plain | Adjustable Length |
 |  |
| Through Hole | Spring-Loaded Ball |
Pin Type Pin Type |
|---|
 |  |
| Quick Release | Clevis |
Material Material |
|---|
|
Shaft Type Shaft Type |
|---|
 |  |
| Plain | Expanding Diameter |
Minimum Hardness Minimum Hardness |
|---|
|
Lock Type Lock Type |
|---|
|
Breaking Strength Breaking Strength |
|---|
|
|
Finish Finish |
|---|
|
Passivation Passivation |
|---|
|
Handle Finish Handle Finish |
|---|
|
Handle Material Handle Material |
|---|
|
Expanding Diameter Quick-Release Pins
Flip the handle 180° to expand and contract the shaft for a tight, vibration-resistant fit. Install pins their entire usable length. For a tight fit, your hole should be equal to or slightly larger than the diameter shown. Pins are made of 17-4 PH stainless steel for strength with some corrosion resistance, and passivated for added protection against corrosion and oxidation. They are magnetic. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
For technical drawings and 3-D models, click on a part number.
| Usable Lg. | Shoulder Dia. | Breaking Strength, lbs. | Handle Material | Handle Color | Each | |
17-4 PH Stainless Steel | ||||||
|---|---|---|---|---|---|---|
1/4" Dia. | ||||||
| 1" | 1" | 8,000 | Anodized 6061 Aluminum | Black | 000000000 | 0000000 |
| 2" | 1" | 8,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
5/16" Dia. | ||||||
| 1" | 1" | 12,500 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
| 2" | 1" | 12,500 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
3/8" Dia. | ||||||
| 1" | 1" | 18,000 | Anodized 6061 Aluminum | Black | 000000000 | 00000 |
| 2" | 1" | 18,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
| 3" | 1" | 18,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
1/2" Dia. | ||||||
| 1" | 1" | 32,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
| 2" | 1" | 32,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
| 3" | 1" | 32,000 | Anodized 6061 Aluminum | Black | 000000000 | 000000 |
Adjustable-Length Locking Quick-Release Pins
These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls. Use them in a hole as close to the diameter as possible, but not larger than the diameter at extended ball height. The T-handle has a hole to add a ring and lanyard (sold separately). Pins are made of cadmium-plated steel for good strength and some corrosion resistance. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
For technical drawings and 3-D models, click on a part number.
| Usable Lg. | Dia. Tolerance | Dia. at Extended Ball Ht. | Min. Hardness | Breaking Strength, lbs. | Ball Material | Handle Material | Handle Color | Each | |
Cadmium-Plated 4130 Alloy Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
1/4" Dia. | |||||||||
| 3/4"-1 1/4" | -0.003" to -0.0015" | 0.289" | Rockwell C40 | 8,200 | 440C Stainless Steel | Black-Oxide 380 Aluminum | Black | 000000000 | 0000000 |
| 1 1/4"-1 3/4" | -0.003" to -0.0015" | 0.289" | Rockwell C40 | 8,200 | 440C Stainless Steel | Black-Oxide 380 Aluminum | Black | 000000000 | 000000 |
3/8" Dia. | |||||||||
| 1 1/4"-1 3/4" | -0.003" to -0.001" | 0.44" | Rockwell C40 | 18,400 | 440C Stainless Steel | Black-Oxide 380 Aluminum | Black | 000000000 | 000000 |
| 1 3/4"-2 1/4" | -0.003" to -0.001" | 0.44" | Rockwell C40 | 18,400 | 440C Stainless Steel | Black-Oxide 380 Aluminum | Black | 000000000 | 000000 |
| 2 1/4"-2 3/4" | -0.003" to -0.001" | 0.44" | Rockwell C40 | 18,400 | 440C Stainless Steel | Black-Oxide 380 Aluminum | Black | 000000000 | 000000 |
Adjustable Clevis Pins
Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin (sold separately). The excess pin length can be cut off after installation.
Zinc-plated steel pins have good strength and some corrosion resistance.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Usable Lg. | Lg. | Dia. Tolerance | Dia. | Ht. | No. of Holes | Through Hole Dia. | For Max. Cotter Pin Dia. | Min. Hardness | Pkg. Qty. | Pkg. | |
Zinc-Plated 1004-1045 Carbon Steel | |||||||||||
3/16" Dia. | |||||||||||
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Rockwell B72 | 10 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Rockwell B72 | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.007" to 0.004" | 3/8" | 3/32" | 3 | 3/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.007" to 0.004" | 3/8" | 3/32" | 5 | 3/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.007" to 0.004" | 3/8" | 3/32" | 6 | 3/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.007" to 0.004" | 3/8" | 3/32" | 7 | 3/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.007" to 0.004" | 3/8" | 3/32" | 7 | 3/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
5/16" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.0085" to 0.0035" | 7/16" | 3/32" | 3 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 5 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 6 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Rockwell B72 | 10 | 000000000 | 0000 |
3/8" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.011" to 0.004" | 1/2" | 1/8" | 3 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 5 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.011" to 0.004" | 1/2" | 1/8" | 6 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Rockwell B72 | 10 | 000000000 | 0000 |
7/16" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0065" to -0.0015" | 9/16" | 5/32" | 6 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 0000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0065" to -0.0015" | 9/16" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 0000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.0065" to -0.0015" | 9/16" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 00000 |
1/2" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to -0.004" | 5/8" | 5/32" | 6 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 0000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.009" to -0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 00000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.009" to -0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 0000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to -0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 10 | 000000000 | 00000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.009" to -0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 00000 |
5/8" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to 0.004" | 13/16" | 1/4" | 6 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to 0.004" | 13/16" | 1/4" | 7 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 0000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.009" to 0.004" | 13/16" | 1/4" | 7 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 00000 |
3/4" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to 0.002" | 15/16" | 5/16" | 6 | 5/32" | 5/32" | Rockwell B72 | 5 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to 0.002" | 15/16" | 5/16" | 7 | 5/32" | 5/32" | Rockwell B72 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||||
3/16" Dia. | |||||||||||
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0075" to 0.0035" | 5/16" | 1/16" | 5 | 3/32" | 3/32" | Not Rated | 1 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.007" to 0.004" | 3/8" | 3/32" | 3 | 3/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.007" to 0.004" | 3/8" | 3/32" | 5 | 3/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.007" to 0.004" | 3/8" | 3/32" | 6 | 3/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.007" to 0.004" | 3/8" | 3/32" | 7 | 3/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.007" to 0.004" | 3/8" | 3/32" | 7 | 3/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
5/16" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.0085" to 0.0035" | 7/16" | 3/32" | 3 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 5 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 6 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.0085" to 0.0035" | 7/16" | 3/32" | 7 | 5/32" | 7/64" | Not Rated | 1 | 000000000 | 00000 |
3/8" Dia. | |||||||||||
| 1/4", 1/2", 3/4" | 1" | -0.011" to 0.004" | 1/2" | 1/8" | 3 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/4", 1/2", 3/4", 1", 1 1/4" | 1 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 5 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.011" to 0.004" | 1/2" | 1/8" | 6 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.011" to 0.004" | 1/2" | 1/8" | 7 | 5/32" | 9/64" | Not Rated | 1 | 000000000 | 00000 |
7/16" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.0065" to -0.0015" | 9/16" | 5/32" | 6 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.0065" to -0.0015" | 9/16" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.0065" to -0.0015" | 9/16" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
1/2" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to 0.004" | 5/8" | 5/32" | 6 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4" | 2 1/2" | -0.009" to 0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4" | 3 1/2" | -0.009" to 0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to 0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.009" to 0.004" | 5/8" | 5/32" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
5/8" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to 0.004" | 13/16" | 1/4" | 6 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to 0.004" | 13/16" | 1/4" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 2 1/4", 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4" | 4" | -0.009" to 0.004" | 13/16" | 1/4" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
3/4" Dia. | |||||||||||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4" | 2" | -0.009" to 0.002" | 15/16" | 5/16" | 6 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
| 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" | 3" | -0.009" to 0.002" | 15/16" | 5/16" | 7 | 5/32" | 5/32" | Not Rated | 1 | 000000000 | 00000 |
Adjustable Bent-Pull Clevis Pins
These pins have multiple through holes; change the length by moving the included hairpin cotter pin. The bend makes them easy to insert and pull out. The excess pin length can be cut off after installation.
Zinc-plated steel pins have good strength and some corrosion resistance.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
| Usable Lg. | Lg. | Dia. Tolerance | No. of Holes | Hole Ctr.-to-Ctr. | Through Hole Dia. | For Max. Cotter Pin Dia. | Each | |
Zinc-Plated 1004-1045 Carbon Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
3/8" Dia. | ||||||||
| 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4" | 4" | -0.005" to 0" | 7 | 1/4" | 5/32" | 5/32" | 000000000 | 00000 |
| 4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6" | 6" | -0.005" to 0" | 7 | 1/4" | 5/32" | 5/32" | 000000000 | 0000 |
1/2" Dia. | ||||||||
| 2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4" | 4" | -0.005" to 0" | 7 | 1/4" | 5/32" | 5/32" | 000000000 | 0000 |
| 4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6" | 6" | -0.005" to 0" | 7 | 1/4" | 5/32" | 5/32" | 000000000 | 0000 |
5/8" Dia. | ||||||||
| 2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4" | 4" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 0000 |
| 4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6" | 6" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 0000 |
3/4" Dia. | ||||||||
| 2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4" | 4" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 0000 |
| 4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6" | 6" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 0000 |
1" Dia. | ||||||||
| 4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6" | 6" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 00000 |
| 6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8" | 8" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 00000 |
1 7/32" Dia. | ||||||||
| 6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8" | 8" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
1/2" Dia. | ||||||||
| 4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6" | 6" | -0.005" to 0" | 7 | 1/4" | 5/32" | 5/32" | 000000000 | 00000 |
5/8" Dia. | ||||||||
| 4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6" | 6" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 00000 |
3/4" Dia. | ||||||||
| 4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6" | 6" | -0.005" to 0" | 7 | 5/16" | 13/64" | 13/64" | 000000000 | 00000 |