Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Nylon wheels are impact- and wear-resistant. They work well on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Their aluminum core adds strength to the wheel without sacrificing cushioning. Use them on smooth or rough floors and in areas with debris.

Casters with 304 stainless steel frame offer good corrosion resistance.

Ball bearings provide smooth swiveling. Double-ball bearings swivel more smoothly than ball bearings.

Kingpinless swivel construction distributes impact better than standard kingpin casters, enabling smooth swiveling and extending service life.

Turn the thumbwheel to lower or raise the leveling pad. Ratchet pulls out for easy adjustment and retracts out of the way when not in use. Nut adjustment requires a wrench to move the leveling pad.

For technical drawings and 3-D models, click on a part number.

The dual-wheel design of these casters provides better load distribution and easier turning than other leveling casters. Turn the nut to adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Casters have sealed double-ball bearings for the smoothest swiveling and protection from dust and debris.

Phenolic wheels are nonmarking and perform well at high temperatures. They roll best on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.

Wheels with sealed ball bearings are smooth rolling and have the best protection against dust and debris.

For technical drawings and 3-D models, click on a part number.

Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.

Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.

Pivoting base compensates for uneven floors.

For technical drawings and 3-D models, click on a part number.

Set these floor locks to the height you need to compensate for uneven and sloped floors. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.

Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.

For technical drawings and 3-D models, click on a part number.

Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.

Side Mount—Slide the frame of your equipment through the mounting plate.

Through-Hole Mount—Mount through a hole in the frame of your equipment; mounting plate can be bolted or welded. These jacks are commonly used with an A-frame trailer coupler.

Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.

Warning: Never use to support people or loads over people.

For technical drawings and 3-D models, click on a part number.

Install a door without needing a second person to hold it upright or leaning it against a wall. These dollies allow you to wheel a door into place and align it with the hinges on the frame. Turn the knobs on the casters to adjust the height. Apply the brakes to prevent them from rolling away. Dollies hold 1 3/4” thick doors; use spacers to hold 1 3/8” thick doors.

Open platforms on these dollies allow liquid to pass through, while a lip on each corner keeps loads from sliding off. Four swivel casters make these easy to maneuver. Dollies can transport square cartons and crates in addition to round drums.

Style B are adjustable to fit different size loads.

Dollies with rubber wheels absorb shock to roll over smooth or rough surfaces.

Also known as appliance dollies, these dollies are used in pairs to support loads of varying sizes. Each half of the dollies has a support with eight rollers at both corners. Loosen the wingnut and slide the ends to adjust. A nonmarring rubber surface on the top of the supports grips loads. Their polypropylene wheels are lightweight and work on smooth surfaces.

Use these dollies to move bulky loads over both level and uneven surfaces. The platforms are rubber-padded to grip loads without damaging the load surface. The rollers are nonmarking nylon.

Styles A and B are corner supports with two contact points connected by an adjustable bar that keeps them parallel. They have rigid platforms for straight-line movement.

Style B have handles on the dollies to make them easier to carry.

Note: When using dollies together, use dollies with the same overall height.