For exact positioning, these hoses swivel 360°.

In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.

Position these exhausters above drums, tanks, and distillers.

Eliminate static buildup while cleaning air.

Eliminate static buildup while cleaning air.

Carry these small cleaners to job sites to remove odors and dust from the air.

Larger than portable air cleaners, these air cleaners roll to where you need them.

Often used in machine shops, these cleaners remove oil and coolant mist from the air.

Remove viruses, bacteria, dust, and other particles from the air.

A thick-gauge metal frame makes these filters more durable than other reusable filters.

These filters are built to withstand higher temperatures than other metal panel air filters.

The pleats create a large surface area for filtering without reducing airflow.

A compound inhibits mildew and mold growth.

The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.

Create a custom-sized filter or protective layer for expensive filters.

Rated MERV 11, these filters capture particles down to 1 micron.

Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.

Use in exhaust hoods to remove grease and oil from the air.

Wash and reuse these pads. Cut to the size you need.

Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

Cut these pads to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

Designed for use with electronic equipment, these pads can withstand prolonged exposure to heat and humidity.

Add support to filter rolls and pads that have been cut to size.

These MERV 14 air filters capture particles down to 0.3 microns.

Rated MERV 11, these air filters capture particles down to 1 micron.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Prevent unauthorized adjustment and unintentional pressure changes with these regulators.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

View and control output pressure remotely and at the source.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.

An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Replace failing or lost O-rings in Festo modular compressed air filters.

Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.

These all-in-one dryer/filters eliminate the need for individual dryers, separators, and filters. They cool air through refrigeration to condense water vapor for removal.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.