Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line.

For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Cool air through refrigeration to condense water vapor.

A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.

These tanks have drain ports on the bottom to remove condensation.

Get clean, dry air wherever you need it. The separator, filter, and dryer mounted on these tanks clean and dry compressed air as you fill it. Once full, move the tank to your workspace on its pneumatic wheels.