Air Control Devices | McMaster-Carr

Control these valves with one hand. Also known as 4/2 valves, they create two actions, such as extending and then retracting a double-acting cylinder.

Two-Hand Two-Action Air Directional Control Valves

Since both hands are required to simultaneously press the buttons, these valves protect workers from accidental machinery start-up. They create two actions, such as extending and then retracting a double-acting cylinder.

Two-Action Air Directional Control
Valves with Exhausting Shut-Off

In the off position, these valves exhaust all air pressure, allowing the equipment to return to the neutral position. Also known as 4/3 exhaust-center valves, they create two actions, such as extracting and then retracting a double-acting cylinder.

Two-Action Air Directional
Control Valves with Full Shut-Off

These valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place. Also known as 4/3 closed-center valves, they create two actions, such as extracting and then retracting a double-acting cylinder.

Single-Action Air Directional Control Valves

Create one action with these valves, such as extending a cylinder.

Multiple-Position Single-Action
Air Directional Control Valves

Control six different outputs from a single source of airflow. These valves have one inlet port and six outlet ports. Push in and rotate the dial to move between outlet ports and send airflow to a different output.

Remote-Location Two-Hand Single-Action
Air Directional Control Valves

The push buttons that operate these valves are separate from the logic unit, allowing you to position them away from machinery. Since both hands are required to simultaneously press the buttons, they protect workers from accidental machinery start-up. They create one action, such as extending a cylinder.

Two-Speed Two-Action Air Directional
Control Valves with Full Shut-Off

These valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place. They create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/3 closed center valves.

Two-Speed Two-Action Air Directional Control Valves

Often used to extend and then retract a cylinder at different speeds, these valves create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves.

Two-Speed Two-Action Air Directional
Control Valves with Exhausting Shut-Off

In the off position, these valves exhaust all air pressure, allowing the equipment to return to the neutral position. They create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/3 exhaust center valves.

Key-Operated Two-Speed Two-Action
Air Directional Control Valves

Because they require a key to operate, you can limit who is able to adjust these valves. They create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves.

Two-Hand Single-Action Air Directional Control Valves

Since both hands are required to simultaneously press the buttons, these valves protect workers from accidental machinery start-up. They create one action, such as extending a cylinder.

Key-Operated Single-Action
Air Directional Control Valves

Because they require a key to operate, you can limit who is able to adjust these valves. They create one action, such as extending a cylinder.

Safety-Lockout Single-Action
Air Directional Control Valves

To prevent accidental start-up, these valves can be locked in their off position with a padlock. They create one action, such as extending a cylinder.

Simultaneous Two-Action Air Directional Control Valves

Also known as 4-way and 5/3 pressure center valves, these valves create two actions at the same time, such as extending two single-acting cylinders at once.

Single-Action Mechanically Operated
Air Directional Control Valves

A simple automation solution that requires no programming, these valves are activated when an object, such as a box rolling on a conveyor, pushes the actuator. They create one action, such as extending a cylinder. Also known as 3-way and 3/2 valves.

Two-Speed Two-Action Mechanically
Operated Air Directional Control Valves

Two-Speed Two-Action Electrically
Operated Air Directional Control Valves

Single-Action Electrically Operated
Air Directional Control Valves

These valves create one action, such as extending a cylinder. Apply voltage to the electrical connection to actuate. They're also known as 3/2 valves.

Fast-Switching Two-Speed Two-Action Electrically
Operated Air Directional Control Valves

Run through equipment cycles up to 30% faster than with standard valves. These valves shift between flow positions in 1.7 ms. Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port.

Two-Speed Two-Action Electrically Operated Air
Directional Control Valves with Exhausting Shut-Off

In the off position, these valves exhaust all air pressure, allowing the equipment to return to the neutral position. Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Apply voltage to the electrical connection to actuate.

Two-Speed Two-Action Electrically Operated
Air Directional Control Valves with Full Shut-Off

These valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place. Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Apply voltage to the electrical connection to actuate.

Fast-Switching Single-Action Electrically
Operated Air Directional Control Valves

Run through equipment cycles up to 30% faster than with standard valves. These valves shift between flow positions in 1.7 ms. Also known as 3/2 valves, they create one action, such as extending a cylinder. Apply voltage to the electrical connection to actuate.

Single-Action Electrically Operated Air
Directional Control Valves with Full Shut-Off

Also known as 3/3 valves, these valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place. They're often used for vacuum suction and release applications and intermediate cylinder stops.

Two-Action Electrically Operated
Air Directional Control Valves

Also known as 4-way valves, these valves create two actions, such as extending and then retracting a double-acting cylinder. Apply voltage to the electrical connection to actuate.

Simultaneous Two-Action Electrically
Operated Air Directional Control Valves

Create two actions at the same time, such as extending two single-acting cylinders at once. Apply voltage to the electrical connection to actuate. Also known as pressure center valves.

Single-Action Foot-Operated
Air Directional Control Valves

These valves create one action, such as extending a cylinder. Use your foot to operate them, leaving your hands free to perform other tasks. Also known as 3-way or 3/2 valves.

Two-Speed Two-Action Foot-Operated
Air Directional Control Valves

Two-Action Foot-Operated
Air Directional Control Valves

Also known as 4-way and 4/2 valves, these valves create two actions, such as extending and then retracting a cylinder. Use your foot to operate them, leaving your hands free to perform other tasks.

Electrically Operated Air Directional
Control Valves with Flow Control

Use a single valve to create motion and control the speed of that motion.

Hazardous Location Electrically
Operated Air Directional Control Valves

These valves are rated for environments where hazardous material is present. They actuate when voltage is applied to the electrical connection.

Robot-Arm-Mounted Electrically
Operated Air Directional Control Valves

With two 3-way integrated solenoid valves, these electrically controlled valves direct airflow to end-of-arm tools that don’t require vacuum suction, such as pick-and-place grippers. Also known as 3/2 valves, each of the two solenoid valves directs air to a different port.

Washdown-Resistant Electrically
Operated Air Directional Control Valves

Rated IP69K, these valves withstand high-pressure, high-temperature washdowns. Their smooth design keeps out dust, dirt, and contaminants, making them easier to keep clean. Apply voltage to the electrical connection to actuate.

Wear-Resistant Electrically Operated
Air Directional Control Valves

Ceramic plates form a longer-lasting seal against oil and dust than rubber seals that deteriorate over time. These valves withstand use in corrosive, dusty, and dirty environments such as foundries, paper mills, and steel plants. Apply voltage to the electrical connection to actuate.

Two-Speed Two-Action Air-Operated Air
Directional Control Valves with Full Shut-Off

In the off position, these valves stop equipment in a locked position with air pressure holding it in place. Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. They actuate by air signal, so they're good for environments where electrical use may be dangerous.

Two-Speed Two-Action Air-Operated
Air Directional Control Valves

Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as pilot valves and 4-way valves, they use an air signal to actuate, so they're good for environments where electrical use may be dangerous.

Single-Action Air-Operated
Air Directional Control Valves

These valves create one action, such as extending a cylinder. Also known as 3/2 or pilot valves, they use an air signal to actuate, so they're good for environments where electrical use may be dangerous.

Modular Air Directional Control Valves

Modular Air Directional Control Valves with Air Manifolds

Mount valves to a single-station base or to a manifold, which allows a single pressure source for multiple valves, then add or remove valves as your needs change.

Modular Air Directional Control Valves
with Air and Electrical Manifolds

Mix and match valve styles on one manifold to meet your control needs. Mount multiple valves to a manifold to reduce piping requirements and create multiple actions from a single pressure input.

Dual-Input Air Directional Control Valves

Air pressure must be supplied to both inlets before the output port will open, allowing air flow to downstream components. Also known as "and" valves.

Input-Selecting Air Directional Control Valves

Also known as shuttle valves and "or" valves, these valves select between the higher of two inlet pressures to power one outlet port.

Air Flow Control Valves

Elbow Air Flow Control Valves

Mount these valves directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves. They control the speed of air-powered equipment by adjusting the volume of airflow.

Flexible-Mount Air Flow Control Valves

A swiveling outlet port on these valves makes connections from any direction. They control the speed of air-powered equipment by adjusting the volume of airflow.

Inline Air Flow Control Valves

Designed to be mounted inline, these valves can be installed in an easy-to-reach location along your line. They control the speed of air-powered equipment by adjusting the volume of airflow.

Precision-Adjust Air Flow Control Valves

A fine-adjustment dial allows tighter control of airflow and cylinder speed than other flow control valves. They control the speed of air-powered equipment by adjusting the volume of airflow entering or exiting.

Tamper-Resistant Air Flow Control Valves

Prevent accidental airflow changes with these valves, which require an adjustment tool to alter their flow rate. They control the speed of air-powered equipment by adjusting the volume of airflow.

Inline Air Flow Control Valves with Flow Indicator

Designed to be mounted inline, these valves can be placed in an easy-to-reach location along your line to control the speed of air-powered equipment by adjusting the volume of airflow. A numeric indicator provides a relative measure of airflow, similar to the volume dial on a speaker, so it's easy to set the same flow rate with each use.

Elbow Air Flow Control Valves with Flow Indicator

A numeric indicator provides a relative measure of airflow, similar to the volume dial on a speaker, so it's easy to set the same flow rate with each use. Mount them directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves. They control the speed of air-powered equipment by adjusting the volume of airflow.

Inline Corrosion-Resistant Air Flow Control Valves

Designed to be mounted inline, these valves can be placed in easy-to-reach locations. Made of plastic and stainless steel parts, they have excellent corrosion resistance. They control the speed of air-powered equipment by adjusting the volume of airflow.

High-Pressure Air Flow Control Valves

These valves handle pressure up to 265 psi. They control the speed of air-powered equipment by adjusting the volume of airflow entering or exiting.

Elbow Corrosion-Resistant Air Flow Control Valves

Mount these valves directly to cylinder ports, eliminating additional tubing between the cylinder and valve for better control than inline valves. Made of plastic and stainless steel parts, they have excellent corrosion resistance. They control the speed of air-powered equipment by adjusting the volume of airflow.

Air-Operated Air Flow Control
Valves with Safety Shut-Off

Protect air-powered equipment in emergency shut-off situations—when system pressure drops, these valves automatically close to stop cylinder motion, even at mid-stroke. They control the speed of air-powered equipment by adjusting the volume of airflow entering or exiting.

Corrosion-Resistant Single-Control
Two-Direction Air Flow Control Valves

Made of PBT, these plastic valves are more corrosion resistant than valves made of aluminum or nylon. A single dial adjusts airflow equally in both directions, controlling the extension and retraction speed of an air cylinder at the same time.

Single-Control Two-Direction Air Flow Control Valves

Adjust airflow equally in both directions. These valves regulate the speed of airflow as it enters and exits equipment. They're often used to control the extension and retraction speed of an air cylinder at the same time.

Slow-Start Air Flow Control Valves

Prevent damage to your equipment by limiting startup airflow and then gradually raising the airflow rate to operating levels.

Dual-Control Two-Direction Air Flow Control Valves

Independently control the speed of airflow in two directions. These valves regulate the speed of airflow as it enters or exits equipment, and are often used to control the extension and retraction speed of an air cylinder at the same time.

Air Flow Check Valves

These valves open to allow flow in one direction and close when flow stops or reverses direction.

Air Compressor Air Flow Check Valves

Prevent air from escaping an air storage tank when the air compressor is not running. These valves open to allow flow into the tank and close when flow stops or reverses direction.

Pressure-Relieving Air
Compressor Air Flow Check Valves

Release pressure in the line between a compressor and an air storage tank, making start-up easier on the motor. These valves open to allow flow into the tank and close when flow stops or reverses direction, preventing air from escaping the tank when the air compressor is not running.

Air On/Off Valves

Electrically Operated Air On/Off Valves

Also known as solenoid valves, these valves are operated by an electrical signal to turn airflow on or off.

Robot-Arm-Mounted Electrically
Operated Air On/Off Valves

With two 2-way integrated solenoid valves, these electrically controlled valves direct airflow to venturi pumps, which generate the suction you need to run end-of-arm tools, such as vacuum cups.

Air-Operated Air On/Off Valves

Also known as blocking valves, these valves allow airflow while an air signal is applied to the air pilot. When the signal stops, the valve closes, trapping air in the system.

Sliding-Sleeve Air On/Off Valves

Slide the knurled sleeve in one direction to stop flow, and slide it back to start flow again.

Quiet Safety-Lockout Air On/Off Valves

These valves have a muffler to reduce exhaust noise. A padlock locks the handle in the shut-off position so you can disconnect air tools safely.

Safety-Lockout Air On/Off Valves

A padlock locks the handle of these valves in the shut-off position so you can disconnect air tools safely.

Foot-Operated Air On/Off Valves

Turn airflow on and off with your foot to keep your hands free to perform other tasks.

Air On/Off Valves

Control flow in two directions from a single source—these valves have two balls for independent control and shut-off of each outlet.

High Airflow Shut-Off On/Off Valves

Also known as air fuses, these valves close automatically to turn airflow off when air volume exceeds the shut-off flow rate.

Air Signal On/Off Valves

When system pressure reaches the maximum, these valves open and send an air signal to turn on a downstream device such as a discharge valve or throttle. They close and send a signal to turn the device off when pressure drops.

Air-Exhaust Control Valves

Made-to-Order Air-Operated Air-Exhaust Control Valves

Choose the pressure range you need. When these valves receive an air signal, they quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. They're often used with air compressors that require continuous operation. Also known as quick exhaust valves.

Quiet Air-Exhaust Control Valves

A muffler reduces exhaust noise. Valves allow airflow into your equipment and then quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. Also known as quick exhaust valves.

Elbow Air-Exhaust Control Valves

Quickly vent exhaust air to the atmosphere or divert it to another place in your system to speed up the movement of equipment. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.

Air-Exhaust Control Valves

Quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. Also known as quick exhaust valves.

Air-Exhaust Flow Control Valves

Install these valves in the exhaust ports of air directional control valves to control exhaust air speed without needing access to your cylinder.

Elbow Air-Exhaust Control Valves with Flow Control

Control the flow of exhaust air while also regulating the exhaust air speed. These valves dump exhaust air to the atmosphere without routing it back through a directional control valve. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.

Air-Pulse Flow Control Valves

Air-Pulse Flow Control Valves for Filter Cleaning

Designed for use in dust-collection systems, these diaphragm valves periodically burst air to knock debris from filters.

Rapid Air-Pulse Flow Control Valves

Convert a continuous stream of air into a series of quick pulses, reducing air consumption by up to 50% and improving performance in air-blowing applications such as cleaning and drying.

Safety Lockout Valves for Modular Compressed Air Filter/Regulator/Lubricators (FRLs)

Safety Lockout Valves for SMC Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for Festo Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for Parker Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for ASCO Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for ARO Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for Wilkerson Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Safety Lockout Valves for Norgren Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Prevent accidental start-up when servicing equipment.

Compressed Air Filter/Regulator/Lubricators (FRLs)

Wilkerson Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Norgren Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Festo Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

SMC Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

ASCO Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Compressed Air Filter/Regulator/Lubricators (FRLs)

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Parker Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

ARO Modular Compressed Air
Filter/Regulator/Lubricators (FRLs)

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Space-Saver Compressed Air
Filter/Regulator/Lubricators (FRLs)

Three components are combined in the same space as a filter alone. These units provide clean, lubricated compressed air at your required pressure.

Compressed Air Filter/Regulator/Lubricators (FRLs)
for Lubricated and Nonlubricated Applications

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

Compressed Air Filter/Regulator/Lubricators
(FRLs) with Push-to-Connect Fittings

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

NPT-to-BSPP Adapting Compressed
Air Filter/Regulator/Lubricators (FRLs)

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Compressed Air Filter/Regulators for Particle Removal

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

Wilkerson Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Festo Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

ASCO Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

ARO Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Norgren Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

SMC Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Parker Modular Compressed Air
Filter/Regulators for Particle Removal

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Compressed Air Filter/Precision
Regulators for Particle Removal

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

Chemical-Resistant Compressed Air
Filter/Regulators for Particle Removal

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Clean Room Compressed Air
Filter/Regulators for Particle Removal

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

NPT-to-BSPP Adapting Compressed Air
Filter/Regulators for Particle Removal

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Corrosion-Resistant Compressed Air
Filter/Regulators for Particle Removal

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

DIN-Mount Compressed Air
Filter/Regulators for Particle Removal

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

Compressed Air Filter/Regulator Manifolds

Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.

SMC Modular Compressed Air Filter/Regulators for Oil Removal

SMC Modular Compressed Air
Filter/Regulators for Oil Removal

An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Two-Stage Compressed Air Filter/Regulators for Oil and Particle Removal

Two-Stage Compressed Air Filter/Regulators
for Oil and Particle Removal

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Compressed Air Filter/Lubricators

Filter and lubricator in one, these filter/lubricators provide clean, lubricated compressed air to extend the service life of tools and equipment.

Slow-Start Actuated Air-Exhaust Valves

Slow-Start Air-Exhaust Valves for SMC Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Slow-Start Air-Exhaust Valves for Wilkerson Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Slow-Start Air-Exhaust Valves for Festo Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Slow-Start Air-Exhaust Valves for Norgren Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Precision Compressed Air Regulators

Electronically Controlled Precision
Compressed Air Regulators with Display

View and control output pressure remotely and at the source.

High-Flow Electronically Controlled Precision
Compressed Air Regulators with Display

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Electronically Controlled Precision
Compressed Air Regulators

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

DIN-Mount Electronically Controlled
Precision Compressed Air Regulators

Mount these regulators to a 35 mm DIN rail with the included bracket.

Precision Compressed Air Regulators

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

High-Flow Precision Compressed Air Regulators

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Miniature Precision Compressed Air Regulators

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

Versa-Mount Precision Compressed Air Regulators

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

Corrosion-Resistant Precision
Compressed Air Regulators

A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.

Easy-Set Precision Compressed Air Regulators

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.