These premium nozzles are engineered for the most efficient airflow consumption.

Control consumption and noise by adjusting the airflow.

Extend these telescoping nozzles to increase your reach.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Create a sheet of high-velocity air.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Attach to a blower for high-speed airflow at low pressure.

These blowguns have a metal body.

The rubber tip won't damage parts.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

Connect the included hose to your air supply and these blowguns are ready to use.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

The included hose is ready to connect to your air supply.

The extra length lets you access hard-to-reach areas.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

The flat nozzle distributes air over a wide area.

Maximize comfort and minimize strain with these lightweight guns.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

These guns provide more than three times the airflow of standard static-eliminating blowguns.

These tubular holders have open ends. Slide a blowgun inside for storage.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

A deflector protects adjacent areas from heating. The flat shape creates a wide airflow.

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Choose these guns for occasional heating.

Prevent buildup of electrostatic discharge (ESD) that can damage electronic components.

Set up your heat gun for hands-free operation.

Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. Choose from blowers with temperature settings from 300° to 750° F.

Distribute heat over a wide area for large jobs.

Replace filters or add parts baskets and drum dollies to your parts cleaning vacuum/blowers. All of these filters and accessories can be used with compatible MiJET parts cleaners.

A pivoting head allows you to direct air where it's needed.

Dry large flat surfaces such as floors with a concentrated stream of air.

Create a more concentrated stream of air than equipment-cooling fans to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs.

In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.

These blowers have an aluminum housing for spark resistance.

A plastic housing offers good corrosion resistance.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle.

These blowers have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations.

For resistance to chemicals as well as corrosion, these blowers have a plastic housing.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle.

Blow twice as much air as other portable blowers.

Produce a stream of air down a doorway or other opening to keep out dust, dirt, insects, and fumes while allowing personnel to pass through.

Sized for use in coolers, offices, and other locations with limited clearance above doorways.