For Bit Shank Type For Bit Shank Type |
---|
![]() | Hex |
![]() | Round |
![]() | Hex for Power Tools |
![]() | Threaded |
Maximum No-Load Speed Maximum No-Load Speed |
---|
|
Drive Direction Drive Direction |
---|
|
Average Air Consumption Average Air Consumption |
---|
Overall Length Overall Length |
---|
Maximum Torque Maximum Torque |
---|
|
Speed Control Speed Control |
---|
|
Minimum Torque Minimum Torque |
---|
|
|
Drive Type Drive Type |
---|
|
More
Designed for intermittent use.
Drills with keyed chuck can be tightened with the included key.
Drills with keyless chuck open and close without a key for fast bit changes.
Styles E, F, and G have a lever throttle with a lock to prevent accidental starts.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
A | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 1/2" | 2.5 | 00000000 | 000000 |
B | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyless | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 1/2" | 2.5 | 00000000 | 00000 |
C | 3/8" | 20,000 | Clockwise | Keyed | 0.33 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Front | 5" | 2 | 00000000 | 00000 |
D | 1/2" | 840 | Clockwise and Counterclockwise | Keyed | 1/2 | 6.9 cfm @ 90 psi | 1/4 | NPT | Female | Handle | 10 3/8" | 3.1 | 00000000 | 000000 |
E | 3/8" | 20,000 | Clockwise | Keyed | 0.48 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Front | 6 1/2" | 2 | 00000000 | 00000 |
F | 3/8" | 2,100 | Clockwise and Counterclockwise | Keyed | 2/5 | 5.3 cfm @ 90 psi | 1/4 | NPT | Female | Handle | 9 1/4" | 2.4 | 00000000 | 000000 |
G | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 0.3 | 5.3 cfm @ 90 psi | 1/4 | NPT | Female | Handle | 8 5/8" | 2.6 | 00000000 | 000000 |
More durable than our light duty drills, these are excellent for general purpose drilling jobs. All have a keyed chuck that can be tightened with the included key.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | ||
A | 3/8" | 2,000 | Clockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 13/16" | 2.5 | 00000000 | 0000000 |
A | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 6 3/8" | 2.5 | 00000000 | 000000 |
B | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 19/32" | 3 | 0000000 | 000000 |
B | 3/8" | 2,600 | Clockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7" | 2.5 | 0000000 | 000000 |
C | 1/2" | 800 | Clockwise and Counterclockwise | Keyed | 1/2 | 6 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 8 1/2" | 3.5 | 00000000 | 000000 |
D | 3/8" | 1,800 | Clockwise and Counterclockwise | Keyed | 1/2 | 4.6 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7" | 2.5 | 00000000 | 000000 |
Rated for continuous use, these tools take on your tough drilling jobs. They have heavy duty bearings and hardened steel gears. All have a keyed chuck that can be tightened with the included key.
Styles B and D have a variable speed that let you set the motor speed at less than the maximum no-load speed.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
A | 1/4" | 4,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 3/32" | 2.5 | 0000000 | 0000000 |
B | 1/4" | 4,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 9 5/16" | 2.5 | 0000000 | 000000 |
B | 3/8" | 1,200 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 10 13/16" | 3 | 0000000 | 000000 |
C | 1/2" | 550 | Clockwise | Keyed | 1 | 8 cfm @ 90 psi | 1/4 | NPT | Female | Side | 13 3/8" | 7 | 0000000 | 000000 |
D | 1/4" | 2,200 | Clockwise and Counterclockwise | Keyed | 0.33 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 9" | 3 | 0000000 | 000000 |
These drills have a threaded spindle instead of a drill chuck for use with threaded-shank drill bits (sold separately). Rated for continuous use, they have heavy duty bearings and hardened steel gears.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Shank Thread Size | Max. No-Load Speed, rpm | Drive Direction | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
1/4"-28 | 2,400 | Clockwise | 2/5 | 22 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 11 3/32" | 2 | 00000000 | 000000000 |
1/4"-28 | 5,300 | Clockwise | 2/5 | 22 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 10 11/16" | 2 | 00000000 | 00000000 |
Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Torque Range, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Clutch Slips Torque Limiter | |||||||||||||
Trigger Speed Control | |||||||||||||
Variable | 800 | 25-75 | 1/4" | 9" | 3 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Variable | 900 | 13-70 | 1/4" | 9 1/2" | 2.9 | 90 | 17 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 25-44 | 1/4" | 8 1/4" | 2.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Push-to-Start Speed Control | |||||||||||||
1 | 1,000 | 1.5-30 | 1/4" | 8 3/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Lever Speed Control | |||||||||||||
Variable | 1,000 | 1.5-30 | 1/4" | 9 1/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 45-70 | 1/4" | 9 1/2" | 1.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Variable | 2,100 | 13-40 | 1/4" | 10" | 2.6 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | Number of Speeds | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Motor Stops Torque Limiter | |||||||||||||
Push-to-Start Speed Control | |||||||||||||
800 | 14.1-35.2 | 1 | 1/4" | 8 1/4" | 1.4 | 85 | 10.5 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000000 |
1,000 | 3.1-9.7 | 1 | 1/4" | 7 1/8" | 0.7 | 85 | 5.6 cfm @ 85 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 3.5-18.5 | 1 | 1/4" | 7 1/4" | 0.9 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Lever Speed Control | |||||||||||||
1,100 | 3.5-17.4 | 1 | 1/4" | 8 1/4" | 1.2 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 9.7-18.5 | 1 | 1/4" | 10 3/4" | 1.5 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.
Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Power Source | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Positive Clutch Drive | ||||||||||||||
Variable | 1,800 | 115 | 1/4" | 7 3/4" | 2.9 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Direct Drive | ||||||||||||||
Variable | 1,800 | 125 | 1/4" | 7" | 2.3 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 000000 |
An angled handle makes it easier to drive fasteners in tight spaces. These direct-drive tools start turning the bit as soon as the operator pulls the trigger. They provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Variable | 1,000 | 70 | 1/4" | 7 1/4" | 2.3 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed | Torque Range, in.-lbs. | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Pistol Grip | ||||||||||||||
in.-lbs. | ||||||||||||||
Variable | 10,000 rpm | 120-840 | Clockwise and Counterclockwise | 1/4" | 6 5/16" | 2.1 | 90 psi | 2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |