Grease Fitting Style Grease Fitting Style |
---|
![]() | ![]() |
Standard | Button Head |
![]() | |
Pin |
Flow Rate Flow Rate |
---|
|
|
Maximum Grease Outlet Pressure Maximum GreaseOutlet Pressure |
---|
|
|
Component Component |
---|
![]() |
Nozzle |
![]() |
Dispensing Tip |
Air Consumption @ Pressure Air Consumption @ Pressure |
---|
|
More
Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.
Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure. Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.
Styles A-D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.
Dispensers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | Air Inlet | Replacement Follower Plates | ||||||||||||||
Style | Max. Dia. | Max. Ht. | Flow Rate, oz./min. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Max. Grease Outlet Pressure with Booster, psi | Grease Outlet Hose Lg., ft. | Material | Max. Pressure, psi | Thread Type | Pipe Size | Gender | Each | Each | ||
With Booster Gun | ||||||||||||||||
A | 12 3/16" | 12 13/16" | 16 | 00, 0, 1, 2 | 7,500 | 10,000 | 13 | Steel | 150 | NPT | 1/4 | Female | 0000000 | 0000000 | 0000000 | 000000 |
B | 12" | 16 9/16" | 64 | 00, 0, 1, 2 | 7,500 | 10,000 | 10 | Steel | 150 | NPT | 1/4 | Female | 00000000 | 00000000 | 0000000 | 00000 |
With Standard Gun | ||||||||||||||||
B | 12" | 16 9/16" | 32 | 00, 0, 1, 2 | 7,500 | __ | 10 | Steel | 150 | NPTF | 1/4 | Female | 0000000 | 00000000 | 0000000 | 00000 |
Dispensers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | Air Inlet | Replacement Follower Plates | ||||||||||||||
Style | Max. Dia. | Max. Ht. | Flow Rate, oz./min. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Max. Grease Outlet Pressure with Booster, psi | Grease Outlet Hose Lg., ft. | Material | Max. Pressure, psi | Thread Type | Pipe Size | Gender | Each | Each | ||
With Booster Gun | ||||||||||||||||
A | 15 15/16" | 26" | 16 | 00, 0, 1, 2 | 7,500 | 10,000 | 13 | Steel | 150 | NPT | 1/4 | Female | 0000000 | 0000000 | 0000000 | 0000000 |
C | 14 7/8" | 27 1/4" | 64 | 00, 0, 1, 2 | 7,500 | 10,000 | 10 | Steel | 150 | NPT | 1/4 | Female | 00000000 | 00000000 | 0000000 | 000000 |
D | 14 7/8" | 27 1/4" | 64 | 00, 0, 1, 2 | 7,500 | 10,000 | 10 | Steel | 150 | NPT | 1/4 | Female | 00000000 | 00000000 | 0000000 | 000000 |
With Standard Gun | ||||||||||||||||
C | 14 7/8" | 27 1/4" | 32 | 00, 0, 1, 2 | 7,500 | __ | 10 | Steel | 150 | NPTF | 1/4 | Female | 0000000 | 00000000 | 0000000 | 000000 |
D | 14 7/8" | 27 1/4" | 32 | 00, 0, 1, 2 | 7,500 | __ | 10 | Steel | 150 | NPTF | 1/4 | Female | 0000000 | 00000000 | 0000000 | 000000 |
For Container | Grease Outlet | Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Dia. | Max. Ht. | Flow Rate, oz./min. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Hose Lg., ft. | Thread Type | Pipe Size | Gender | Material | Max. Pressure, psi | Hose Lg. ft. | Thread Type | Pipe Size | Gender | Each | |
E | 23 5/8" | 36 13/16" | 64 | 00, 0, 1, 2 | 7,500 | 4 | NPT | 3/8 | Male | Steel | 150 | 3 | NPT | 1/4 | Female | 00000000 | 000000000 |
Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease. Install or remove pumps as your lubrication needs change. Mounting holes are drilled through the pump's body. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.
Note: For proper operation, pumps require a three-port solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).
Grease Outlet | Grease Inlet | Overall | Air Inlet | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Pumps | Cap., oz. | Ounces per Cycle, oz. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Ht. | Wd. | Thread Type | Pipe Size | Gender | Hole Dia. | Fasteners Included | Each | |
1 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 8 5/16" | 3 1/4" | NPT | 1/8 | Female | 9/32" | No | 0000000 | 0000000 |
2 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 8 5/16" | 4 1/2" | NPT | 1/8 | Female | 9/32" | No | 0000000 | 000000 |
4 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 8 5/16" | 7" | NPT | 1/8 | Female | 9/32" | No | 0000000 | 000000 |
6 | 1 1/2 | 0-0.007 | 00, 0, 1, 2 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 8 5/16" | 9 1/2" | NPT | 1/8 | Female | 9/32" | No | 0000000 | 000000 |
Add-On Pump, 1 1/4" Wd. | 0000000 | Each | 000000 |
These nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
Nozzles with spring guard have a steel spring guard that prevents kinking.
Nozzles with Dispensing Tip | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Dispensing Tip | Nozzle Connection | Replacement Seal Kits | ||||||||||
Lg. | Material | Reinforcement Material | Lg. | Style | Material | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Each | Each | ||
For Standard Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
12" | PVC Plastic | Kevlar | 1 5/8" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
12" | Polyurethane Rubber | __ | 1" | Straight | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
18" | PVC Plastic | Kevlar | 1 5/8" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
20" | Polyurethane Rubber | __ | 1" | Straight | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
24" | PVC Plastic | Kevlar | 1 5/8" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
36" | PVC Plastic | Kevlar | 1 5/8" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
Nozzles with Spring Guard | |||||||||||||
12" | Buna-N Rubber | __ | 2 1/2" | Straight | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
18" | Buna-N Rubber | __ | 2 1/2" | Straight | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
36" | Nylon Plastic | __ | 1 7/16" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
For 5/8" Button-Head Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
12" | Polyethylene Plastic | __ | 15/16" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 00000 |
20" | Polyethylene Plastic | __ | 15/16" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
Nozzles with Spring Guard | |||||||||||||
12" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
36" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
For 7/8" Button-Head Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
12" | Polyethylene Plastic | __ | 1" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
20" | Polyethylene Plastic | __ | 1" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
Nozzles with Spring Guard | |||||||||||||
12" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
36" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
For Pin-Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
12" | Synthetic Rubber | __ | 1 1/2" | Straight | Steel | 4,800 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
18" | Synthetic Rubber | __ | 1 1/2" | Straight | Steel | 4,800 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
Nozzles have threads on both ends for connecting a grease gun to a dispensing tip.
Nozzles with spring guard have a steel spring guard that prevents kinking.
Nozzle | Nozzle Connection | ||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Material | Reinforcement Material | Fitting Material | Max. Grease Outlet Pressure, psi | Thread Type | Pipe/Thread Size | Gender | Each | |
Nozzles | |||||||||
12" | Polyurethane Rubber | __ | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 |
12" | PVC Plastic | Kevlar | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 0000 |
18" | PVC Plastic | Kevlar | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 0000 |
20" | Polyurethane Rubber | __ | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 0000 |
24" | PVC Plastic | Kevlar | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 |
36" | PVC Plastic | Kevlar | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 |
Nozzles with Spring Guard | |||||||||
12" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
18" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
18" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
24" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
24" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
36" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
36" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
Use compressed air to dispense grease. This gun has a pistol grip that allows for one-hand operation, so it’s better for lubricating hard-to-reach spots than a lever-grip gun. Pull the trigger using small strokes to deliver small amounts of grease; hold the trigger for a continuous flow. The gun has a spring guard on the nozzle to prevent kinking.
Nozzle Connection | Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., oz. | Flow Rate, oz./min. | Strokes per oz. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Nozzle Lg. | Nozzle Material | Thread Type | Pipe/Thread Size | Gender | Pressure, psi | Thread Type | Pipe Size | Gender | Loading Method | Each | |
For Standard Grease Fittings | ||||||||||||||||
16 | 10 | 29 | 000, 00, 0, 1, 2, 3 | 6,000 | 30" | Nylon Plastic | NPT UNEF | 1/8 7/16"-20 | Male Male | 40-150 | NPS | 1/4 | Female | Bulk Filler Pump, Cartridge, Hand Pack, Suction | 0000000 | 0000000 |
Designed to recycle oil, this system dispenses, collects, and filters oil for reuse. It delivers a controlled flow at a specific interval. It's often used to drip oil over gears, bearings, and crankshafts. To adjust the flow, use a wrench to remove the pump from the reservoir and turn the adjustment nut. The system can be used with any oil grade. Flow rate depends on temperature.
Oil Outlet | Oil Inlet | Overall | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Oz. per Cycle | Dispensing Interval, min. | Max. Oil Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Lg. | Wd. | Ht. | Temp. Range, °F | Voltage | Current, A | Each | |
1 | 0-0.005 | 1 | 500 | NPT | 1/8 | Female | NPT | 1/4 | Female | 17 15/16" | 6 3/4" | 8 1/16" | -15° to 120° | 120V AC | 0.03 | 0000000 | 0000000 |
Replacement Filter | 0000000 | Each | 00000 |
Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.
Panel | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pumps | Cap. | Oz. per Cycle | Dispensing Interval | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Reservoir Material | Air Inlet Pressure, psi | For Air Inlet Tube OD | Voltage | Current, A | Temp. Range, °F | For Max. ISO Viscosity Grade | Each | |
1/8 NPT Female Outlets | |||||||||||||||
2 | 16 oz. | 0-0.007 | 0.6 sec.-24 hrs. | 1,080 | 10 3/4" | 10 7/8" | Plastic | 40-120 | 1/4" | 120V AC | 0.06 | -15° to 180° | 220 | 000000 | 0000000 |
4 | 1 qt. | 0-0.007 | 0.6 sec.-24 hrs. | 1,080 | 10 3/4" | 10 7/8" | Plastic | 40-120 | 1/4" | 120V AC | 0.06 | -15° to 180° | 220 | 000000 | 000000 |
Connect these modular pumps to your air system and add a reservoir and solenoid valve to automate the flow of oil. Install or remove pumps as your lubrication needs change. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.
Pumps with spray nozzle provide a broader dispensing pattern. Nozzle bends and stays in position.
Note: For proper operation, pumps require a three-way solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).
Oil Outlet | Oil Inlet | Overall | Air Inlet | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pumps | Oz. per Cycle | Max. Oil Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Ht. | Wd. | Air Inlet Pressure, psi | Thread Type | Pipe Size | Gender | Hole Dia. | Fasteners Included | For Max. ISO Viscosity Grade | Each | |
Pumps | |||||||||||||||||||
1 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 2" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
2 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 3 1/4" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
4 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 5 3/4" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
6 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 8 1/4" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
Pumps with Spray Nozzle | |||||||||||||||||||
1 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 2" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
2 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 3 1/4" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
4 | 0-0.007 | 1,080 | NPT | 1/8 | Female | NPT | 1/8 | Female | 4" | 5 3/4" | 40-120 | NPT | 1/8 | Female | 9/32" | No | 220 | 0000000 | 000000 |
Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
Overall | Air Inlet | Air Outlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Dp. | Max. Air Inlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Temp. Range, °F | Mounting Hole Thread Size | For Max. ISO Viscosity Grade | Each | |
1/8 NPTF Female Outlet | ||||||||||||||||
2 qt. | 30 | 14 1/4" | 5 13/16" | 5 13/16" | 125 | NPTF | 1/4 | Female | NPTF | 1/8 | Female | -30° to 140° | 5/16"-24 | 150 | 00000000 | 0000000 |
1 gal. | 30 | 19 1/4" | 5 13/16" | 5 13/16" | 125 | NPTF | 1/4 | Female | NPTF | 1/8 | Female | -30° to 140° | 5/16"-24 | 150 | 00000000 | 000000 |
2 gal. | 30 | 32 1/4" | 5 13/16" | 5 13/16" | 125 | NPTF | 1/4 | Female | NPTF | 1/8 | Female | -30° to 140° | 5/16"-24 | 150 | 00000000 | 000000 |
Replacement Filter | 00000000 | Each | 00000 |
Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum of oil (not included).
Air Inlet | For Max. Viscosity | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container Size, gal. | Flow Rate, gpm | Max. Oil Outlet Pressure, psi | Oil Outlet Hose Lg., ft. | Material | Pressure, psi | Hose Lg., ft. | Thread Type | Pipe Size | Gender | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Includes | Each | |
55 | 1.8 | 540 | 6 | Aluminum | 40-180 | 6 | NPT | 3/8 | Female | 1,500 | 250 | 9,000 | 8 | Bung Adapter with a 2 NPT Male Connection, Pump, Air Inlet Hose, Air Pressure Regulator with Gauge, Oil Outlet Hose | 000000 | 000000000 |
Deliver a mist of oil using shop air. A knob on the handle adjusts the amount of oil dispensed. Twist the dispensing tip to adjust the spray pattern. Flow rate depends on temperature.
Nozzle | Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., qt. | Flow Rate, gph | Type | Lg. | Material | Dispensing Tip Material | Body Material | Air Consumption @ Pressure | Air Inlet Pressure, psi | Thread Type | Pipe Size | Gender | Features | Each | |
1 | 15 | Rigid | 12" | Aluminum | Brass | Steel | 9 cfm @ 100 psi | 80-120 | NPT | 1/4 | Female | Adjustable Spray Pattern | 00000000 | 0000000 |