Designed to recycle oil, this system dispenses, collects, and filters oil for reuse. It delivers a controlled flow at a specific interval. It's often used to drip oil over gears, bearings, and crankshafts. To adjust the flow, use a wrench to remove the pump from the reservoir and turn the adjustment nut. The system can be used with any oil grade. Flow rate depends on temperature.

Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.

Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure. Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.

Styles A-D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease. Install or remove pumps as your lubrication needs change. Mounting holes are drilled through the pump's body. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.

Note: For proper operation, pumps require a three-port solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).