Filter by
Force @ Pressure
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Blows per Minute
About Powered Nibblers and Powered Cutters
More
Bench-Mount Air-Powered Presses
3 3/16" Throat Dp.
4" Throat Dp.
For punching, pressing, and swaging operations, these presses provide consistent pressure and faster operation than manual presses. The air power controls the pressing and return of the ram. The two-handed safety controls meet OSHA 29 CFR 1910.217 standards for mechanical power presses. These presses can be used with die sets (sold separately).
Ram | Air Connection | Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Force @ Pressure | Max. Stroke Lg. | Throat Dp. | Clearance Over Base Plate | Material | Dia. | Ram Hole Thread Size  | Pipe Size | Thread Type | Gender | Press Ht. | Frame Material | Lg. | Wd. | Specifications Met | Each | |
Fixed Base Plate | ||||||||||||||||
| 330 lbs. @ 50 psi 396 lbs. @ 60 psi 462 lbs. @ 70 psi 528 lbs. @ 80 psi | 3" | 3 3/16" | 6" | Steel | 3/4" | 1/2"-13 | 1/4 | NPT | Female | 21" | Aluminum/Steel | 7 1/16" | 4 1/16" | OSHA Compliant 29 CFR 1910.217 | 0000000 | 000000000 |
| 755 lbs. @ 50 psi 906 lbs. @ 60 psi 1,057 lbs. @ 70 psi 1,208 lbs. @ 80 psi | 3" | 4" | 6 3/4" | Steel | 1" | 3/4"-10 | 1/4 | NPT | Female | 22" | Aluminum/Steel | 11" | 15" | OSHA Compliant 29 CFR 1910.217 | 0000000 | 00000000 |
| 1,510 lbs. @ 50 psi 1,812 lbs. @ 60 psi 2,114 lbs. @ 70 psi 2,416 lbs. @ 80 psi | 3" | 4" | 6 3/4" | Steel | 1" | 3/4"-10 | 1/4 | NPT | Female | 27" | Aluminum/Steel | 11" | 15" | OSHA Compliant 29 CFR 1910.217 | 0000000 | 00000000 |
| 2,265 lbs. @ 50 psi 2,718 lbs. @ 60 psi 3,171 lbs. @ 70 psi 3,624 lbs. @ 80 psi | 3" | 4" | 6 3/4" | Steel | 1" | 3/4"-10 | 1/4 | NPT | Female | 32" | Aluminum/Steel | 11" | 15" | OSHA Compliant 29 CFR 1910.217 | 0000000 | 00000000 |
Air-Powered Chiseling Hammers
Use for cutting, chipping, scraping, and staking. Also known as air hammers and zip guns. These tools are not suitable for driving rivets.
Piston stroke determines the hammering power. The longer the stroke, the greater the power.
1 5/8" Piston Stroke
2 5/8" Piston Stroke
3 1/2" Piston Stroke
Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | For Chisel Shank Type | O'all Lg. | Wt., lbs. | Housing Material | Barrel Material | Each | |
Pistol Grip—Trigger Speed Control | ||||||||||||||
| 0 -5,000 | 1 5/8" | 14 | 90 | 1/4 | NPT | Female | 3/8" | 0.401" Round | 6 1/4" | 2.6 | Aluminum | Steel | 00000000 | 000000 |
| 0 -3,500 | 2 5/8" | 15 | 90 | 1/4 | NPT | Female | 3/8" | 0.401" Round | 8" | 3.4 | Aluminum | Steel | 00000000 | 00000 |
| 0 -2,000 | 3 1/2" | 14 | 90 | 1/4 | NPT | Female | 3/8" | 0.401" Round | 10" | 4.1 | Aluminum | Steel | 0000000 | 000000 |
| Replacement Mechanical Aid Spring Retainer | 00000000 | Each | 00000 |
Chisels
Flat Chisel Bit Blade (1/2" and 3/4" Wd.)
Flat Chisel Bit Blade (1 1/2" and 2" Wd.)
Offset Blade
Cutter Chisel Bit Blade
Blank Chisel Bit Blade
Panel Cutter Blade
Rivet Cutter Blade
Pipe Cutter Blade
Claw Ripper Blade
Point Blade
Bushing Splitter Blade
| Blade Wd. | O'all Lg. | Shank Lg. | Material | Each | |
Flat Chisel Bit Blade | |||||
|---|---|---|---|---|---|
| 1/2" | 6 1/2" | 1 9/16" | Steel | 0000000 | 000000 |
| 3/4" | 6 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
| 3/4" | 11" | 1 9/16" | Steel | 0000000 | 00000 |
| 3/4" | 18" | 1 9/16" | Steel | 0000000 | 00000 |
| 1 1/2" | 6 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
| 2" | 7" | 1 9/16" | Steel | 0000000 | 00000 |
Offset Chisel Bit Blade | |||||
| 1 3/8" | 6 1/4" | 1 9/16" | Steel | 0000000 | 00000 |
Cutter Chisel Bit Blade | |||||
| 1" | 7" | 1 9/16" | Steel | 0000000 | 00000 |
| 1 1/4" | 8 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
Blank Chisel Bit Blade | |||||
| 1/2" | 6 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
Panel Cutter Blade | |||||
| 3/4" | 6" | 1 9/16" | Steel | 0000000 | 00000 |
Rivet Cutter Blade | |||||
| 5/8" | 5 3/4" | 1 9/16" | Steel | 0000000 | 00000 |
Pipe Cutter Blade | |||||
| 5/8" | 7 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
Claw Ripper Blade | |||||
| 5/8" | 5 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
Point Blade | |||||
| 1/4" | 6 1/2" | 1 9/16" | Steel | 0000000 | 00000 |
Bushing Splitter Blade | |||||
| 1/2" | 6 1/4" | 1 9/16" | Steel | 0000000 | 00000 |
Chisel Sets
4-Piece Set
9-Piece Set
| No. of Pieces | Shank Type | Shank Lg. | Material | Includes | Each | |
| 4 | 0.401" Round | 1 9/16" | Steel | 1/2" Wide × 6 1/2" Long Flat Chisel 3/4" Wide × 6 1/2" Long Flat Chisel 3/4" Wide × 6" Long Panel Cutter Chisel 3/16" Wide × 6 1/2" Long Point Chisel | 0000000 | 000000 |
| 9 | 0.401" Round | 1 9/16" | Steel | 3/4" Wide × 6 1/2" Long Flat Chisel 1 5/16" Wide × 6 1/4" Long Offset Chisel 1 1/4" Wide × 8 1/2" Long Cutter Chisel 3/4" Wide × 6" Long Panel Cutter Chisel 5/8" Wide × 5 3/4" Long Rivet Cutter Chisel 17/32" Wide × 7 1/2" Long Pipe Cutter Chisel 5/8" Wide × 5 3/8" Long Claw Ripper Chisel 3/16" Wide × 6 1/2" Long Point Chisel 1/2" Wide × 6 1/4" Long Bushing Splitter Chisel | 0000000 | 000000 |
Air-Powered Chiseling Hammers with Chisels
Use for cutting, chipping, scraping, and staking. Also known as air hammers and zip guns. These tools are not suitable for driving rivets.
Piston stroke determines the hammering power. The longer the stroke, the greater the power.
Air Inlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | Wt., lbs. | Includes | Each | |
Pistol Grip—Trigger Speed Control | ||||||||||||
| 0 -5,000 | 1 5/8" | 14 | 90 | 1/4 | NPT | Female | 3/8" | 6 1/4" | 2.6 | 3/4" Wide × 7 3/4" Long Edging Chisel 3/4" Wide × 7 3/4" Long Pipe Cutter Chisel 3/4" Wide × 7 3/4" Long Flat Chisel 3/4" Wide × 7 3/4" Long Cutter Chisel 15/32" Wide × 7 3/4" Long Point Chisel | 00000000 | 000000 |
| 0 -3,500 | 2 5/8" | 15 | 90 | 1/4 | NPT | Female | 3/8" | 8" | 3.4 | 3/4" Wide × 7 3/4" Long Edging Chisel 3/4" Wide × 7 3/4" Long Pipe Cutter Chisel 3/4" Wide × 7 3/4" Long Flat Chisel 3/4" Wide × 7 3/4" Long Cutter Chisel 15/32" Wide × 7 3/4" Long Point Chisel | 00000000 | 000000 |
| 0 -2,000 | 3 1/2" | 14 | 90 | 1/4 | NPT | Female | 3/8" | 10" | 4.1 | 3/4" Wide × 7 3/4" Long Edging Chisel 3/4" Wide × 7 3/4" Long Pipe Cutter Chisel 3/4" Wide × 7 3/4" Long Flat Chisel 3/4" Wide × 7 3/4" Long Cutter Chisel 15/32" Wide × 7 3/4" Long Point Chisel | 0000000 | 000000 |
| Replacement Mechanical Aid Spring Retainer | 00000000 | Each | 00000 |
Optional Chisels
Flat Chisel Bit Blade (1/2" and 3/4" Wd.)
Flat Chisel Bit Blade (1 1/2" and 2" Wd.)
Offset Blade
Cutter Chisel Bit Blade
Blank Chisel Bit Blade
Panel Cutter Blade
Rivet Cutter Blade
Pipe Cutter Blade
Claw Ripper Blade
Point Blade
Bushing Splitter Blade
| Blade Wd. | O'all Lg. | Shank Type | Material | Each | |
Flat Chisel Bit Blade | |||||
|---|---|---|---|---|---|
| 1/2" | 6 1/2" | 0.401" Round | Steel | 0000000 | 000000 |
| 3/4" | 6 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
| 3/4" | 11" | 0.401" Round | Steel | 0000000 | 00000 |
| 3/4" | 18" | 0.401" Round | Steel | 0000000 | 00000 |
| 1 1/2" | 6 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
| 2" | 7" | 0.401" Round | Steel | 0000000 | 00000 |
Offset Chisel Bit Blade | |||||
| 1 3/8" | 6 1/4" | 0.401" Round | Steel | 0000000 | 00000 |
Cutter Chisel Bit Blade | |||||
| 1" | 7" | 0.401" Round | Steel | 0000000 | 00000 |
| 1 1/4" | 8 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
Blank Chisel Bit Blade | |||||
| 1/2" | 6 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
Panel Cutter Blade | |||||
| 3/4" | 6" | 0.401" Round | Steel | 0000000 | 00000 |
Rivet Cutter Blade | |||||
| 5/8" | 5 3/4" | 0.401" Round | Steel | 0000000 | 00000 |
Pipe Cutter Blade | |||||
| 5/8" | 7 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
Claw Ripper Blade | |||||
| 5/8" | 5 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
Point Blade | |||||
| 1/4" | 6 1/2" | 0.401" Round | Steel | 0000000 | 00000 |
Bushing Splitter Blade | |||||
| 1/2" | 6 1/4" | 0.401" Round | Steel | 0000000 | 00000 |
Optional Chisel Sets
4-Piece Set
9-Piece Set
| No. of Pieces | Shank Type | Material | Includes | Each | |
| 4 | 0.401" Round | Steel | 1/2" Wide × 6 1/2" Long Flat Chisel 3/4" Wide × 6 1/2" Long Flat Chisel 3/4" Wide × 6" Long Panel Cutter Chisel 3/16" Wide × 6 1/2" Long Point Chisel | 0000000 | 000000 |
| 9 | 0.401" Round | Steel | 3/4" Wide × 6 1/2" Long Flat Chisel 1 5/16" Wide × 6 1/4" Long Offset Chisel 1 1/4" Wide × 8 1/2" Long Cutter Chisel 3/4" Wide × 6" Long Panel Cutter Chisel 5/8" Wide × 5 3/4" Long Rivet Cutter Chisel 17/32" Wide × 7 1/2" Long Pipe Cutter Chisel 5/8" Wide × 5 3/8" Long Claw Ripper Chisel 3/16" Wide × 6 1/2" Long Point Chisel 1/2" Wide × 6 1/4" Long Bushing Splitter Chisel | 0000000 | 000000 |
Quick-Change Air-Powered Chiseling Hammers
Designed for fast-hitting and light striking, these hammers allow easy chisel changes—pull back on the retainer to insert or remove the chisel. Use for scaling, trimming, cutting, chipping, piercing, and peening. These tools are not suitable for driving rivets.
Piston stroke determines the hammering power. The longer the stroke, the greater the power.
Straight Grip
Pistol Grip
Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | For Chisel Shank Type | O'all Lg. | Wt., lbs. | Housing Material | Barrel Material | Each | |
Straight Grip—Lever Speed Control | ||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 7/16" Octagon | 7 1/4" | 1.3 | Aluminum | Steel | 0000000 | 0000000 |
| 0 -9,000 | 1 1/4" | 6 | 90 | 1/4 | NPT | Female | 1/4" | 15/32" Hex | 9 1/4" | 2.3 | Aluminum | Steel | 0000000 | 000000 |
Pistol Grip—Button Speed Control | ||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 7/16" Octagon | 6" | 1.3 | Aluminum | Steel | 0000000 | 000000 |
| 0 -9,000 | 1 1/4" | 6 | 90 | 1/4 | NPT | Female | 1/4" | 15/32" Hex | 6" | 2.3 | Aluminum | Steel | 0000000 | 000000 |
Chisels for 0-13,000 Blows per Minute Hammers
Blank Chisel Bit Blade
Flat Chisel Bit Blade (5/8" Wd.)
Flat Chisel Bit Blade (1 1/2" Wd.)
Offset Chisel Bit Blade
Scaler Blade
| Blade Wd. | O'all Lg. | Shank Type | Shank Lg. | Material | Each | |
Blank Chisel Bit Blade | ||||||
|---|---|---|---|---|---|---|
| 1/2" | 3" | 7/16" Octagon | 9/32" | Steel | 0000000 | 000000 |
Flat Chisel Bit Blade | ||||||
| 5/8" | 4" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
| 5/8" | 7" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
| 1 1/2" | 12" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Offset Chisel Bit Blade | ||||||
| 3/4" | 3 1/2" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Scaler Blade | ||||||
| 1/2" | 3 1/2" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Chisels for 0-9,000 Blows per Minute Hammers
Flat Chisel Bit Blade (5/8" Wd.)
Flat Chisel Bit Blade (1" Wd.)
Flat Chisel Bit Blade (2" Wd.)
Blank Blade
Point Blade
Scaler Blade
| Blade Wd. | O'all Lg. | Shank Type | Shank Length | Material | Each | |
Flat Chisel Bit Blade | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 6" | 15/32" Hex | 11/16" | Steel | 0000000 | 000000 |
| 1" | 6" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
| 2" | 12" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Offset Chisel Bit Blade | ||||||
| 3/4" | 7" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Blank Chisel Bit Blade | ||||||
| 5/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Point Blade | ||||||
| 1/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Scaler Blade | ||||||
| 5/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Air-Powered Chipping Hammers
More powerful than Air-Powered Chiseling Hammers, use these tools for heavy material removal and in foundry and fabrication shops.
Piston stroke determines the hammering power. The longer the stroke, the greater the power.
Swivel hose connectors (sold separately) eliminate cracked hoses due to kinking and broken inlet bushings. The connectors screw into the air inlet and allow hose to swivel with the hammer.
Mufflers (sold separately) cover the tool’s exhaust port to reduce sound.
Curved Grip
D-Handle Grip
Air Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | For Chisel Collar Shape | O'all Lg. | Wt., lbs. | Housing Material | Each | |
For 0.580" Hex Chisel Shank | |||||||||||||
Curved Grip—Lever Speed Control | |||||||||||||
| 2,500 | 1" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 15 1/2" | 14.8 | Steel | 0000000 | 0000000 |
| 2,300 | 2" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 16" | 15.1 | Steel | 0000000 | 000000 |
| 1,725 | 3" | 29 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 18" | 16.6 | Steel | 0000000 | 000000 |
| 1,480 | 4" | 29 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 19" | 17.5 | Steel | 0000000 | 000000 |
D-Handle Grip—Lever Speed Control | |||||||||||||
| 2,450 | 1" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 12" | 16 | Steel | 00000000 | 000000 |
| 2,300 | 2" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 14" | 18 | Steel | 00000000 | 000000 |
| 2,100 | 3" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 15 1/4" | 19 | Steel | 00000000 | 000000 |
| 1,700 | 4" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 16 1/2" | 20 | Steel | 00000000 | 000000 |
For 0.680" Round Chisel Shank | |||||||||||||
Curved Grip—Lever Speed Control | |||||||||||||
| 2,500 | 1" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 15 1/2" | 14.8 | Steel | 0000000 | 000000 |
| 2,300 | 2" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 16" | 15.1 | Steel | 0000000 | 000000 |
| 1,725 | 3" | 29 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 18" | 16.6 | Steel | 0000000 | 000000 |
| 1,480 | 4" | 29 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 19" | 17.5 | Steel | 0000000 | 000000 |
D-Handle Grip—Lever Speed Control | |||||||||||||
| 2,450 | 1" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 12" | 16 | Steel | 00000000 | 000000 |
| 2,300 | 2" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 14" | 18 | Steel | 00000000 | 000000 |
| 2,100 | 3" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 15 1/4" | 19 | Steel | 00000000 | 000000 |
| 1,700 | 4" | 28 | 90 | 3/8 | NPT | Female | 1/2" | Oval | 16 1/2" | 20 | Steel | 00000000 | 000000 |
Chisels
Flat Chisel Bit Blade
Point Blade
Hex Shank | Round Shank | |||||||
|---|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Shank Type | Collar Shape | Material | Each | Each | ||
Flat Chisel Bit Blade | ||||||||
| 1" | 9" | 0.580" Hex | Oval | Steel | 0000000 | 000000 | 000000 | 00 |
| 1" | 9" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 000000 |
| 1" | 12" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 1" | 12" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 1" | 18" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 1" | 18" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 1" | 24" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 1" | 24" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 1" | 36" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 2" | 9" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 2" | 9" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 2" | 12" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 2" | 12" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 3" | 9" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 3" | 9" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
Point Blade | ||||||||
| 1/4" | 9" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 1/4" | 9" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
| 1/4" | 12" | 0.580" Hex | Oval | Steel | 0000000 | 00000 | 000000 | 00 |
| 1/4" | 12" | 0.680" Round | Oval | Steel | 000000 | 00 | 0000000 | 00000 |
Replacement Parts for Curved Grip Hammers
| Style | Component | Each | |
| 1 | Handle | 00000000 | 0000000 |
| 2 | Throttle Lever | 00000000 | 00000 |
| 3 | Throttle Lever Pin | 00000000 | 00000 |
| 4 | Throttle Lever Stop Pin | 00000000 | 00000 |
| 5 | Throttle Valve Ball | 00000000 | 00000 |
| 6 | Throttle Valve Plunger | 00000000 | 00000 |
| 7 | Throttle Valve Plunger Bushing | 00000000 | 00000 |
| 8 | Throttle Valve Spring | 00000000 | 00000 |
| 9 | Throttle Valve Cap | 00000000 | 00000 |
| 10 | Air Strainer | 00000000 | 00000 |
| 11 | Inlet Bushing | 00000000 | 00000 |
| 12 | Valve Washer | 00000000 | 00000 |
| 13 | Valve Seat | 00000000 | 000000 |
| 14 | Valve Cap | 00000000 | 000000 |
| 15 | Valve Spacer | 00000000 | 000000 |
| 16 | Dowel Pin | 00000000 | 00000 |
| 17 | Locking Ring | 00000000 | 000000 |
| 18 | Exhaust Deflector | 00000000 | 00000 |
| 19 | Piston (for models 5957A11, A12, A15, and A16) | 00000000 | 000000 |
| 19 | Piston (for models 5957A13, A14, A17, and A18) | 00000000 | 000000 |
| 20 | Hexagon Nozzle | 00000000 | 00000 |
| 20 | Round Nozzle | 00000000 | 00000 |
| 21 | Lock Spring | 00000000 | 00000 |
| 22 | Plain Retainer | 00000000 | 000000 |
| 23 | Quick-Change Retainer for Oval Collar Chisels | 00000000 | 000000 |
| 24 | Quick-Change Retainer for Oval and Round Collar Chisels | 00000000 | 000000 |
Replacement Parts for D-Handle Grip Hammers
| Style | Component | Each | |
| 1 | Inlet Bushing | 000000000 | 000000 |
| 2 | Inlet O-Ring | 000000000 | 0000 |
| 3 | Spring | 000000000 | 0000 |
| 4 | Throttle Valve | 000000000 | 0000 |
| 5 | Throttle Valve Pin | 000000000 | 0000 |
| 6 | Throttle Valve O-Ring | 000000000 | 0000 |
| 7 | Throttle Bushing | 000000000 | 00000 |
| 8 | Trigger and Two Valve Pins | 000000000 | 0000 |
| 9 | Handle—Includes Throttle Bushing, Trigger and Two Valve Pins | 000000000 | 000000 |
| 10 | Valve Pin | 000000000 | 0000 |
| 11 | Flange Bolt | 000000000 | 0000 |
| 12 | Disc Valve | 000000000 | 0000 |
| 13 | Seat Valve | 000000000 | 00000 |
| 14 | Valve Bumper | 000000000 | 0000 |
| 15 | Piston for 1" Stroke | 000000000 | 00000 |
| 15 | Piston for 2" Stroke | 000000000 | 00000 |
| 15 | Piston for 3" Stroke | 000000000 | 00000 |
| 16 | Absorbing Ring | 000000000 | 000 |
| 17 | Flange | 000000000 | 000000 |
| 18 | Retainer | 00000000 | 000000 |
| 19 | Retainer Spring | 000000000 | 00000 |
| 20 | Nyloc Nut | 000000000 | 00000 |
| 21 | Washer | 000000000 | 0000 |
| 22 | Spacer | 000000000 | 0000 |
| 23 | Plug | 000000000 | 0000 |
Hydraulic Hole Punches
Our strongest punch, this tool has 35 tons of force to punch through tough materials such as bus bars, railings, and I-beams. It requires a 10,000 psi hydraulic pump (sold separately).
Hole Punches
| For Hole Dia. | For Max. Steel Thick. | Punching Force, lbs. | Throat Dp. | Ht. | Wd. | Dp. | Material | Includes | Each | |
For Use On Aluminum, Brass, Copper, Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 7/16", 9/16", 11/16", 13/16" | 1/2" | 70,000 | 2 3/4" | 14" | 3 1/2" | 8" | Steel | 4 Punches, 4 Dies | 0000000 | 000000000 |
Hydraulic Pump
| Max. Air Pressure, psi | Power, hp | Voltage | Frequency, Hz | Ht. | Wd. | Dp. | Power Source | Cord Lg., ft. | Plug Type | Includes | Each | |
| 10,000 | 1/2 | 120V AC | 60 | 15 1/2" | 10 1/2" | 9 1/2" | Plug In | 16 | Three Prong | 10-ft. Hydraulic Hose, Fittings, Hydraulic Oil, Pump Controls with 10-ft. Cable | 0000000 | 000000000 |
Air-Powered Sheet Metal Nibblers
A
B
C
D
Cutting Pattern -
Straight, Right
Curves, Left Curves
Straight, Right
Curves, Left Curves
These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Air Consumption, cfm | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin, Plastic | |||||||||||||||
| 3/64" | __ | 1/32" | 1/4" | 1/4" | 7 1/16" | Steel | Aluminum | 3,200 | 62 | 1/2" | Corrugated | Lever | 21 | 00000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Steel, Tin | |||||||||||||||
| 3/64" | __ | 3/64" | 3/16" | 3/16" | 7" | Steel | Plastic | 2,600 | 46.5 | 5/8" | Corrugated | Lever | 4 | 0000000 | 000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/32" | 5/64" | 1/8" | 1/4" | 2" | 12" | Steel | Aluminum | 192 | 55 | 1 1/2" | Corrugated, Flat | Lever | 27 | 000000 | 000000 |
Cutting Pattern—Straight | |||||||||||||||
(D) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 11/64" | 1/8" | 11/64" | 3/16" | 6" | 12" | Steel | Aluminum | 192 | 48 | 2 1/2" | Flat | Trigger with Lock | 21-23 | 00000000 | 00000000 |