McMaster-Carr logo
    Filter by
    For Bit Shank Type
    Air Hose ID
    Air Inlet Pipe Size
    Industrial Info Compare
    Recommended Operating Air Pressure
    Torque-Limiting Mechanism
    Number of Speeds
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Pipe Size
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    37 Products

    Air-Powered Torque Screwdrivers

    Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
    Note: Air tools require lubrication to operate properly.
    Clutch Slip Torque Limiter—in·lbf
    Image of Product. Front orientation. Torque Screwdrivers. Air-Powered Torque Screwdrivers, Trigger Speed Control.
    Image of Product. Front orientation. Torque Screwdrivers. Air-Powered Torque Screwdrivers, Push-to-Start Speed Control.
    Image of Product. Front orientation. Torque Screwdrivers. Air-Powered Torque Screwdrivers, Lever Speed Control.

    Trigger Speed Control

    Push-to-Start Speed Control

    Lever Speed Control

    Air Inlet
    Max. No-Load Rotational
    Speed, rpm
    Torque Range,
    in·lbf
    No. of
    Speeds
    Max. Torque,
    in·lbf
    Drive Direction
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Driver
    Style
    Wt.,
    lb.
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Each
    Trigger Speed Control
    80055 to 100Variable100Clockwise and Counterclockwise1/4"9"Driver3904 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"5767A590000000
    90013 to 70Variable70Clockwise and Counterclockwise1/4"9 1/2"Driver2.99017 ft³/min @ 90 psi1/4
    		NPT
    		Female1/4"7029A15000000
     
    Push-to-Start Speed Control
    1,0001.5 to 30130Clockwise and Counterclockwise1/4"8 3/4"Driver1.19013 ft³/min @ 90 psi1/8
    		NPT
    		Female1/4"7029A32000000
     
    Lever Speed Control
    1,0001.5 to 30Variable30Clockwise and Counterclockwise1/4"9 1/4"Driver1.19013 ft³/min @ 90 psi1/8
    		NPT
    		Female1/4"7029A34000000
    1,80045 to 70Variable70Clockwise and Counterclockwise1/4"9 1/2"Driver1.5904 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"5767A51000000
    2,10013 to 40Variable40Clockwise and Counterclockwise1/4"10"Driver2.69016 ft³/min @ 90 psi1/4
    		NPT
    		Female1/4"7029A14000000
     

    High-Precision Air-Powered Torque Screwdrivers

    The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
    Note: Air tools require lubrication to operate properly.
    Motor Stop Torque Limiter
    Image of Product. Front orientation. Torque Screwdrivers. High-Precision Air-Powered Torque Screwdrivers, Push-to-Start Speed Control.
    Image of Product. Lever Speed Control, 8 1/4" Overall Lg.. Front orientation. 8 1/4" Overall Length. High-Precision Air-Powered Torque Screwdrivers, Lever Speed Control.
    Image of Product. Lever Speed Control, 10 3/4" Overall Lg.. Front orientation. 10 3/4" Overall Length. High-Precision Air-Powered Torque Screwdrivers, Lever Speed Control.

    Push-to-Start Speed

    Control

    Lever Speed Control, 8

    1/4" Overall Lg.

    Lever Speed Control, 10

    3/4" Overall Lg.

    Air Inlet
    Max. No-Load Rotational
    Speed, rpm
    Torque Range,
    in·lbf
    No. of
    Speeds
    Max. Torque,
    in·lbf
    Drive Direction
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Driver
    Style
    Wt.,
    lb.
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Each
    Push-to-Start Speed Control
    80014.1 to 35.2135.2Clockwise and Counterclockwise1/4"8 1/4"Driver1.48510.5 ft³/min @ 85 psi1/4
    		NPT
    		Female1/4"5925A13000000000
    1,0003.1 to 9.719.7Clockwise and Counterclockwise1/4"7 1/8"Driver0.7855.6 ft³/min @ 85 psi1/8
    		NPT
    		Female1/4"5925A1100000000
    1,1009.7 to 18.5118.5Clockwise and Counterclockwise1/4"7 1/4"Driver0.9857 ft³/min @ 85 psi1/4
    		NPT
    		Female1/4"5925A1200000000
     
    Lever Speed Control
    1,1003.5 to 18.5118.5Clockwise and Counterclockwise1/4"10 3/4"Driver1.5857 ft³/min @ 85 psi1/4
    		NPT
    		Female1/4"5925A1800000000
    1,1009.7 to 18.5118.5Clockwise and Counterclockwise1/4"8 1/4"Driver1.2857 ft³/min @ 85 psi1/4
    		NPT
    		Female1/4"5925A1400000000
     

    Air-Powered Impact Drivers

    Image of Product. Front orientation. Impact Drivers. Air-Powered Impact Drivers.
    Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
    Note: Air tools require lubrication to operate properly.
    Air Inlet
    No. of
    Speeds
    Max. No-Load Rotational
    Speed, rpm
    Torque Range,
    in·lbf
    Drive Direction
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Wt.,
    lb.
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Each
    Pistol Grip
     
    Measures in·lbf
    Variable10,000120 to 840Clockwise and Counterclockwise1/4"6 5/16"2.1902 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"2869N110000000
     

    Air-Powered Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Air-Powered Screwdrivers.
    Connect these tools to your shop air to quickly install and remove fasteners. With fewer moving parts than battery-powered screwdrivers, these are less likely to overheat when used continuously. They also operate at higher speeds than battery-powered screwdrivers, so they're great for production lines and other high-volume jobs when you're on a time crunch.
    Pistol Grip—The angled handle keeps your wrist in a comfortable, natural position, reducing fatigue during lengthy projects.
    Direct Drive—These screwdrivers will spin as long as you press the trigger. They don't have any built-in mechanism for preventing overtightening or limiting torque, so they're best for jobs where speed matters more than precision. You don't have to push on the screw to turn the bit, so they're often used to fasten compressible materials.
    Positive-Clutch Drive—Designed to prevent overtightening, these screwdrivers are best for jobs that require consistent torque, such as electronics. Pull the trigger and push on the screw to start turning the bit. They'll stop automatically when they reach the max torque.
    Air Inlet
    No. of
    Speeds
    Max. No-Load
    Speed, rpm
    For Bit Hex
    Shank Size
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Wt.,
    lb.
    Each
    Pistol Grip
     
    Direct Drive
    12,2001/4"902.5 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"2.35767A780000000
    Variable1,8001/4"904 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"2.357555A21000000
     
    Positive-Clutch Drive
    Variable1,8001/4"904 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"2.957485A11000000
     

    Screw Feeders

    Image of Product. For Manual Screwdriving Operation. Front orientation. Contains Inset. For Manual Screwdriving Operation.
    Image of Product. For Robotic Screwdriving Operation. Front orientation. Contains Inset. For Robotic Screwdriving Operation.

    For Manual Screwdriving Operation

    For Robotic Screwdriving Operation

    To speed up assembly lines, these feeders sort loose screws and hold them up one at a time. They present each screw headfirst, so it’s easy to pick them up with a screwdriver. These feeders are ready to use right out of the box—just pour screws into the hopper. They’re made for high-volume assembly, so they won’t jam even after extensive use.
    These feeders work with a variety of head types, including those with an extended flange or a lock washer. Use with either magnetic or nonmagnetic screws. Measure your screw’s length from under the head.
    For Manual Screwdriving Operation—Feeders for manual screwdriving operation have a V-shaped groove that guides the tip of your screwdriver to the screw.
    For Robotic Screwdriving Operation—Feeders for robotic screwdriving operation have a flat plate that gives automated equipment plenty of space to pick up the screw. You can integrate them with your robot so that they send a signal when the next screw is ready.
    For Screw
    Size
    Head Dia.
    Head Ht.
    Lg.
    Head Type
    Screw Pick-Up
    Rate, per sec.
    Voltage,
    V AC
    Each
    For Manual Screwdriving Operation
    No. 000, M1
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.063" to 0.394"
    1.6 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A1130000000
    No. 00, M1.2
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.075" to 0.394"
    1.9 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A114000000
    No. 00, No. 0, M1.4
    		0.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.087" to 0.394"
    2.2 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A115000000
    No. 0, No. 1, M1.70.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.106" to 0.394"
    2.7 mm to 10 mm    		Hex, Rounded, Socket
    		3100 to 2405931A116000000
    No. 1, M2
    		0.118" to 0.138"
    3 mm to 3.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.126" to 0.708"
    3.2 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A117000000
    No. 2, M2.3
    		0.13" to 0.157"
    3.3 mm to 4 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.146" to 0.708"
    3.7 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A118000000
    No. 3, M2.6
    		0.142" to 0.177"
    3.6 mm to 4.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.165" to 0.708"
    4.2 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A119000000
    No. 4, M3
    		0.157" to 0.217"
    4 mm to 5.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.189" to 0.708"
    4.8 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A121000000
    No. 6, M3.5
    		0.189" to 0.315"
    4.8 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.22" to 0.708"
    5.6 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A122000000
    No. 7, No. 8, M4
    		0.213" to 0.315"
    5.4 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.252" to 0.708"
    6.4 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A123000000
    No. 10, M5
    		0.244" to 0.394"
    6.2 mm to 10 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.315" to 0.708"
    8 mm to 18 mm    		Hex, Rounded, Socket
    		3100 to 2405931A124000000
     
    For Robotic Screwdriving Operation
    No. 000, M1
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.4 mm to 1 mm    		0.063" to 0.394"
    1.6 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A125000000
    No. 00, M1.2
    		0.071" to 0.177"
    1.8 mm to 4.5 mm    		0.014" to 0.039"
    0.4 mm to 1 mm    		0.075" to 0.394"
    1.9 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A126000000
    No. 00, No. 0, M1.4
    		0.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.087" to 0.394"
    2.2 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A127000000
    No. 0, No. 1, M1.70.079" to 0.177"
    2 mm to 4.5 mm    		0.014" to 0.039"
    0.35 mm to 1 mm    		0.106" to 0.394"
    2.7 mm to 10 mm    		Hex, Rounded, Socket
    		1100 to 2405931A128000000
    No. 1, M2
    		0.118" to 0.138"
    3 mm to 3.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.126" to 0.708"
    3.2 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A12900000000
    No. 2, M2.3
    		0.13" to 0.157"
    3.3 mm to 4 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.146" to 0.708"
    3.7 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13100000000
    No. 3, M2.6
    		0.142" to 0.177"
    3.6 mm to 4.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.165" to 0.708"
    4.2 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13200000000
    No. 4, M3
    		0.157" to 0.217"
    4 mm to 5.5 mm    		0.02" to 0.217"
    0.5 mm to 5.5 mm    		0.189" to 0.708"
    4.8 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13300000000
    No. 6, M3.5
    		0.189" to 0.315"
    4.8 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.22" to 0.708"
    5.6 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13400000000
    No. 7, No. 8, M4
    		0.213" to 0.315"
    5.4 mm to 8 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.252" to 0.708"
    6.4 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13500000000
    No. 10, M5
    		0.244" to 0.394"
    6.2 mm to 10 mm    		0.02" to 0.315"
    0.5 mm to 8 mm    		0.315" to 0.708"
    8 mm to 18 mm    		Hex, Rounded, Socket
    		1100 to 2405931A13600000000
     
    back to top