Power Source Power Source | Show |
---|
|
For Staple Leg Length For Staple Leg Length |
---|
|
|
|
For Staple Style For Staple Style |
---|
![]() | Flat |
For Bit Shank Type For Bit Shank Type |
---|
![]() | Hex for Power Tools |
![]() | Hex |
Maximum Torque Maximum Torque |
---|
|
Speed Control Speed Control |
---|
|
Staple Drive Style Staple Drive Style |
---|
|
Drive Type Drive Type |
---|
|
Maximum No-Load Speed Maximum No-Load Speed |
---|
|
Average Air Consumption Average Air Consumption |
---|
|
Compressed air does the work for you. This stapler does not clinch the staple.
Air Inlet | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Staple Wd. | For Staple Leg Lg. | Staple Capacity | Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | Includes | Each | |
1/4" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2" | 100 | 70-120 | 1/4 | NPT | Female | Plastic Case | 0000000 | 0000000 |
Small Pack | Large Pack | ||||||
---|---|---|---|---|---|---|---|
Leg Lg. | Wire Gauge | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Galvanized Steel | |||||||
3/8" | 18 | __ | 000000 | 00 | 5,000 | 0000000 | 000000 |
1/2" | 18 | __ | 000000 | 00 | 5,000 | 0000000 | 00000 |
5/8" | 18 | 1,000 | 0000000 | 00000 | 5,000 | 0000000 | 00000 |
3/4" | 18 | 1,000 | 0000000 | 0000 | 5,000 | 0000000 | 00000 |
7/8" | 18 | __ | 000000 | 00 | 5,000 | 0000000 | 00000 |
1" | 18 | 1,000 | 00000000 | 0000 | 5,000 | 0000000 | 00000 |
1 1/8" | 18 | __ | 000000 | 00 | 5,000 | 0000000 | 00000 |
1 1/4" | 18 | 1,000 | 00000000 | 0000 | 5,000 | 0000000 | 00000 |
1 1/2" | 18 | 1,000 | 00000000 | 0000 | 5,000 | 0000000 | 00000 |
1 9/16" | 18 | __ | 000000 | 00 | 5,000 | 0000000 | 00000 |
Stainless Steel | |||||||
1" | 18 | 1,000 | 00000000 | 00000 | 5,000 | 00000000 | 00000 |
1 1/4" | 18 | 1,000 | 00000000 | 00000 | 5,000 | 00000000 | 00000 |
1 1/2" | 18 | 1,000 | 00000000 | 00000 | 5,000 | 00000000 | 000000 |
Drive bigger staples than you can with standard air-powered staplers. These staplers do not clinch the staple.
Air Inlet | ||||||||
---|---|---|---|---|---|---|---|---|
For Staple Wd. | For Staple Leg Lg. | Staple Capacity | Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | Each | |
1" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2" | 150 | 80-110 | 1/4 | NPT | Female | 00000000 | 0000000 |
This stapler has a smaller body and is 50% lighter than our other air-powered staplers. It does not clinch the staple.
These staplers compress the box material as the staple is driven for a tight clinch.
For Staple | Throat Opening | Air Inlet | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Leg Lg. | Staple Capacity | Lg. | Ht. | Ht. | Lg. | Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | Each | |
1/2" | 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" | 84 | 9" | 10" | 7/8" | 5 1/2" | 70-80 | 1/4 | NPT | Female | 0000000 | 0000000 |
1/2" | 3/8", 1/2", 5/8" | 100 | 15" | 10" | 7/8" | 5 1/2" | 70-80 | 1/4 | NPT | Female | 0000000 | 000000 |
Replacement Tongue | 00000000 | Each | 000000 |
Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.
Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Power Source | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Positive Clutch Drive | ||||||||||||||
Variable | 1,800 | 115 | 1/4" | 7 3/4" | 2.9 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Direct Drive | ||||||||||||||
Variable | 1,800 | 125 | 1/4" | 7" | 2.3 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 000000 |
An angled handle makes it easier to drive fasteners in tight spaces. These direct-drive tools start turning the bit as soon as the operator pulls the trigger. They provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Variable | 1,000 | 70 | 1/4" | 7 1/4" | 2.3 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Torque Range, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Clutch Slips Torque Limiter | |||||||||||||
Trigger Speed Control | |||||||||||||
Variable | 800 | 25-75 | 1/4" | 9" | 3 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Variable | 900 | 13-70 | 1/4" | 9 1/2" | 2.9 | 90 | 17 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 25-44 | 1/4" | 8 1/4" | 2.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Push-to-Start Speed Control | |||||||||||||
1 | 1,000 | 1.5-30 | 1/4" | 8 3/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Lever Speed Control | |||||||||||||
Variable | 1,000 | 1.5-30 | 1/4" | 9 1/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 45-70 | 1/4" | 9 1/2" | 1.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Variable | 2,100 | 13-40 | 1/4" | 10" | 2.6 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | Number of Speeds | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Motor Stops Torque Limiter | |||||||||||||
Push-to-Start Speed Control | |||||||||||||
800 | 14.1-35.2 | 1 | 1/4" | 8 1/4" | 1.4 | 85 | 10.5 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000000 |
1,000 | 3.1-9.7 | 1 | 1/4" | 7 1/8" | 0.7 | 85 | 5.6 cfm @ 85 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 3.5-18.5 | 1 | 1/4" | 7 1/4" | 0.9 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Lever Speed Control | |||||||||||||
1,100 | 3.5-17.4 | 1 | 1/4" | 8 1/4" | 1.2 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 9.7-18.5 | 1 | 1/4" | 10 3/4" | 1.5 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed | Torque Range, in.-lbs. | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Pistol Grip | ||||||||||||||
in.-lbs. | ||||||||||||||
Variable | 10,000 rpm | 120-840 | Clockwise and Counterclockwise | 1/4" | 6 5/16" | 2.1 | 90 psi | 2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |