Inject lubricant into motors, bearings, engine blocks, and all kinds of machinery.

Keep thin grease from leaking out—the check valve on these fittings has a Buna-N seat that creates a tighter seal than check valves on other grease fittings.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.

Use these fittings in tight spaces where protruding fittings won't work.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. They're also known as hydraulic grease fittings.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.

Lubricate multiple points from a single location.

Fill these tools with light oil, then tap with a hammer to open clogged fittings.

Access difficult-to-reach lubrication points from up to 10 ft. away.

Dispense from grease guns into grease fittings and bare lubrication points.

Dispense from grease guns into grease fittings and bare lubrication points.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Attach these nipples to guns to load grease from bulk filler pumps.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

More portable than air-powered options, these guns operate on a rechargeable battery.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Turn a small tube of grease into a dispenser.

Deliver small amounts of grease with only a light push against the lubrication point.

Move grease-dispensing guns in any direction without kinking the outlet hose.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

These manual dispensers are more portable than air-powered dispensers.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Flip the lever to start and stop flow.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Connect a tube fitting and tubing to the dispenser outlet to access hard-to-reach lubrication points.

Deliver a mist of oil using shop air.

These dispensers have an opening for filling without removing the nozzle.