For Testing For Testing |
|---|
|
|
Concentration Range Concentration Range |
|---|
About Lubricants
More
pH Testing Paper
Check pH levels without a meter. When this testing paper is dipped in a sample, it changes color to indicate pH. Match the color of the testing paper to the color chart to determine the sample’s pH.
| pH Range | Numeric Increments | No. of Color Points | Wd. | Lg., ft. | Each | |
| 0-13.0 pH | 1 | 14 | 1/2" | 50 | 0000000 | 000000 |
| 1.0-6.0 pH | 1 | 6 | 1/4" | 15 | 0000000 | 0000 |
| 1.0-11.0 pH | 1 | 11 | 1/2" | 50 | 0000000 | 00000 |
| 3.0-5.5 pH | 0.5 | 6 | 1/2" | 50 | 0000000 | 00000 |
| 3.0-9.0 pH | 1 | 7 | 1/2" | 50 | 0000000 | 00000 |
| 6.0-8.0 pH | 0.4 | 7 | 1/2" | 50 | 0000000 | 00000 |
| 6.5-13.0 pH | 0.5 | 14 | 1/4" | 15 | 000000 | 0000 |
| 8.0-9.5 pH | 0.5 | 4 | 1/4" | 15 | 0000000 | 0000 |
| 10.0-12.0 pH | 0.5 | 5 | 1/4" | 15 | 0000000 | 0000 |
Water-Quality Combination Test Kits
Test for contaminants before installing water-treatment equipment such as boilers and filters. You can also check your pipes and equipment for improper chemical levels that can cause corrosion and scale buildup, shortening their life.
367-test kits include tests for six common water-quality parameters in boiler systems and cooling towers.
| For Testing | Range | Test Type | Number of Tests | Each | |
367-test kits | |||||
|---|---|---|---|---|---|
| Hardness Alkalinity Dissolved Oxygen Phosphate Sulfite Chloride | Total; 5.0-15.0/100-300 ppm Phenolthalein and Total; 100-300/500-1500 ppm 1.0-12.0 ppm 0-10 ppm 20-60/50-150 ppm 100-300/5,000-15,000 ppm | Analog Analog Analog Analog Analog Analog | 75 75 30 12 100 75 | 00000000 | 0000000 |
Water-Quality Test Strips
Dip these strips into your liquid to quickly test water conditions. Strips change color to indicate the value reached; match the color of the strip to the color chart on the bottle to interpret the results.
Lubricant Analysis Kits
Send in samples of your grease, oil, or coolant, and get back a full report on the condition of both your lubricant and equipment. Samples are tested within 24 hours of arrival at the lab, and the results are emailed to you. If the lab discovers critical conditions, they will call you to provide guidance on how to address the problem. Kit includes six bottles with labels, so you can test multiple samples.
Analysis includes ferrography for traces of metal that indicate wear; infrared spectroscopy for soot, nitrogen, and other signs of oxidation; and an elemental analysis for contaminants, such as water or fuel.
Kit for testing coolant with glycol is for coolant used in most engines—it includes a test of the percentage of glycol to make sure there's the right amount in your coolant.
| For Testing | Number of Bottles | Bottle Cap., oz. | Tests Included | Includes | Each | |
| Coolant | 6 | 4 | Elemental Analysis, Ammonia Concentration, pH Level, Total Dissolved Solids, Flash Point, Fourier-Transform Infrared Spectroscopy, Wear Particle Analytical Ferrography, Varnish Potential, Corrosion by Cast Iron Chip | Equipment Data Sheets (EDS), Sample Bottles, Sample Bottle Labels, Shipping Box | 0000000 | 0000000 |
| Coolant with Glycol | 6 | 4 | Elemental Analysis, Ammonia Concentration, Glycol Concentration, pH Level, Concentration by Refractometer, Total Dissolved Solids, Flash Point, Fourier-Transform Infrared Spectroscopy, Wear Particle Analytical Ferrography, Varnish Potential, Corrosion by Cast Iron Chip | Equipment Data Sheets (EDS), Sample Bottles, Sample Bottle Labels, Shipping Box | 0000000 | 000000 |