Pipe has clockwise (right-hand) threads on one end and counterclockwise (left-hand) threads on the other end. When you use a wrench to turn, connections on both ends tighten at the same time.

Made of galvanized steel, this Schedule 40 pipe has fair corrosion resistance and is designed for low-pressure applications.

Assortments contain threaded pipe in various lengths.

Typically used with medium-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 80.

Typically used with high-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 160.

Typically used with thin-wall stainless steel unthreaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with thick-wall aluminum unthreaded pipe fittings.

Typically used with low-pressure aluminum threaded pipe fittings.

Typically used with high-pressure brass and bronze threaded pipe fittings.

Typically used with precision extreme-pressure brass and bronze threaded pipe fittings.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

These fittings are NSF certified for use in corrosive waste gravity-flow systems. Made of CPVC, they have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances.

This Type M tubing has the thinnest walls of all our copper tubing for drinking water. It withstands pressures up to 980 psi.

Aluminum tubing is lightweight with good corrosion resistance and weldability.

Bend this tubing into the shape you need without special tools or elbow fittings.

This tubing meets MIL-T-7081 standards.

Multiple colors allow you to color-code your lines for easy identification.

The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Form elbows and bends with this hose and it will hold its shape without support.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Polished on the outside to a #8 reflective, mirror-like finish, these tubes have no visible grain lines.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Choose between rods that are polished to a brushed finish or a mirror-like finish.

The matte plating on these rods, sometimes called industrial chrome and hard chrome, creates a slippery surface that minimizes galling and prevents parts from seizing.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The outside of these tubes is anodized to improve wear and corrosion resistance.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Frequently used to make valve bodies, pistons, and hydraulic parts, 6020 aluminum is easier to machine and more corrosion resistant than 6061, but it is not as weldable.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Bolt flanges to equipment to start a run of duct.