Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

Assortments contain threaded pipe in various lengths.

A plastic sleeve prevents destructive corrosion when connecting different metals.

Typically used with medium-pressure iron and steel threaded pipe fittings. Also known as Schedule 80.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Typically used with low-pressure stainless steel threaded pipe fittings.

Typically used with standard-wall aluminum unthreaded pipe fittings.

Typically used with thin-wall aluminum unthreaded pipe fittings.

Typically used with low-pressure brass and bronze threaded pipe fittings.

Typically used with medium-pressure brass and bronze threaded pipe fittings.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

This Type L tubing has thicker walls than Type M tubing. It withstands pressures up to 1,500 psi.

This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1,900 psi.

Unlike other aluminum tubing, this tubing is rigid and will not bend.

Commonly used in marine applications, this tubing contains magnesium for extra corrosion resistance.

This general purpose tubing is the industry standard for air and water applications.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.

With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

An anodized coating forms a bond to the inside, outside, and ends of these tubes to improve wear and corrosion resistance.

These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.

The matte plating on these rods, sometimes called industrial chrome and hard chrome, creates a slippery surface that minimizes galling and prevents parts from seizing.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

These sheets and bars are precision ground either on all six sides or just on the top and bottom.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.

The honeycomb design provides a higher strength-to-weight ratio than solid sheets.

3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.

The textured surface on these sheets increases rigidity and hides fingerprints and dents.

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.