Material Material |
|---|
|
Surface Surface |
|---|
 |  |
| Smooth | Serrated |
 | |
| Projections |
Uniform Load Rating Uniform Load Rating |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Uniform Load Deflection Uniform Load Deflection |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Fastener Type Fastener Type |
|---|
|
|
Metal Bar Grating
Smooth
Serrated
Able to support heavier loads than plank grating, bar grating is good for trenches, mezzanines, walkways, work platforms, and floors. This grating has an open design that allows air, light, and debris to flow through. Cross bars hold the bearing bars in place; bearing bars help distribute weight and must rest on supports. Use Fasteners for Metal Bar Grating to secure.
Serrated grating provides maximum slip resistance.
Aluminum grating is more corrosion resistant than galvanized steel. Plus, it’s lightweight, nonsparking, and nonmagnetic. Note: 4-ft. wide aluminum grating is reinforced with banding.
To Order: For custom sizes, please specify width and length. Note: Grating less than 17" long is reinforced with banding.
For technical drawings and 3-D models, click on a part number.
Smooth Grating
Bearing Bar | Uniform Load | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd., ft. | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Lengths, ft. | Per Ft. | |
Aluminum | |||||||||||
| 2 | 1" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 2 | 1" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/4" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/4" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/2" | 1/8" | 1 3/16" | 4" | 947 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/2" | 3/16" | 1 3/16" | 4" | 1,421 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/4" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/4" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/2" | 1/8" | 1 3/16" | 4" | 947 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/2" | 3/16" | 1 3/16" | 4" | 1,421 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 4 | 1" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 4 | 1" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/4" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 4 | 1 1/4" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/2" | 1/8" | 1 3/16" | 4" | 947 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/2" | 3/16" | 1 3/16" | 4" | 1,421 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 000000 | |
Smooth Custom Size Grating
Width | Length | Bearing Bar | Uniform Load | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., ft. | Tolerance | Max., ft. | Tolerance | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Per Sq. Ft. | |
Aluminum | |||||||||||||
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 000000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/4" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/4" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/2" | 1/8" | 1 3/16" | 4" | 947 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/2" | 3/16" | 1 3/16" | 4" | 1,421 lbs./sq. ft. @ 2 ft. | 0.096" @ 2 ft. | No | Yes | 0000000 | 00000 |
Serrated Grating
Bearing Bar | Uniform Load | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd., ft. | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Lengths, ft. | Per Ft. | |
Aluminum | |||||||||||
| 2 | 1" | 1/8" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 000000 | |
| 2 | 1" | 3/16" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/4" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/4" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/2" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 2 | 1 1/2" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1" | 1/8" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 00000 | |
| 3 | 1" | 3/16" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/4" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/4" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/2" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 3 | 1 1/2" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 4 | 1" | 1/8" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 00000 | |
| 4 | 1" | 3/16" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/4" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 | |
| 4 | 1 1/4" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/2" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 000000 | |
| 4 | 1 1/2" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 000000 | |
Serrated Custom Size Grating
Width | Length | Bearing Bar | Uniform Load | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., ft. | Tolerance | Max., ft. | Tolerance | Ht. | Wd. | Center-to-Center Wd. | Center-to-Center Cross Bar Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Per Sq. Ft. | |
Aluminum | |||||||||||||
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1" | 1/8" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 000000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1" | 3/16" | 1 3/16" | 4" | Not Rated | Not Rated | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/4" | 1/8" | 1 3/16" | 4" | 421 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/4" | 3/16" | 1 3/16" | 4" | 632 lbs./sq. ft. @ 2 ft. | 0.144" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/2" | 1/8" | 1 3/16" | 4" | 658 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 4 | -0.25" to 0.25" | 24 | -0.25" to 0.25" | 1 1/2" | 3/16" | 1 3/16" | 4" | 987 lbs./sq. ft. @ 2 ft. | 0.115" @ 2 ft. | No | Yes | 0000000 | 00000 |
Fasteners for Metal Bar Grating
Secure grating to your support structure.
Swivel locks are easy to install, adjust, and remove—tighten the bolt and the fastener swivels into place.
Saddle clips bridge two bearing bars. Fasteners require a hole in the support structure as well as a threaded stud and hex nut (not included).
C-clips hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
Connectors tie two sheets of bar grating together. They hold edges of sheets together as you walk, reducing trip hazards.
For technical drawings and 3-D models, click on a part number.
Swivel Locks
For Bearing Bar | Galvanized Steel | 304 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Mounting Hardware Included | Pkg. Qty. | Pkg. | Pkg. | ||
| 1"-2 1/8" | 1/8"-1/4" | 1 3/16" | 1/8"-3/4" | Yes | 1 | 00000000 | 000000 | 000000 | 00 |
| 1 3/4" | 1/8"-1/4" | 5/8"-1 3/8" | 1/8"-3/4" | Yes | 1 | 000000 | 00 | 00000000 | 000000 |
| 2"-3" | 1/8"-1/4" | 1 3/16" | 1/8"-3/4" | Yes | 1 | 00000000 | 00000 | 000000 | 00 |
C-Clips
For Bearing Bar | Galvanized Steel | 316 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Mounting Hardware Included | Pkg. Qty. | Pkg. | Pkg. | ||
| 3/4" | 1/4" | 1 3/16" | 1/8"-1/2" | Yes | 1 | 0000000 | 00000 | 000000 | 00 |
| 1" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 | 00000000 | 00000 |
| 1 1/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 | 00000000 | 0000 |
| 1 1/2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 | 00000000 | 0000 |
| 1 3/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 | 00000000 | 0000 |
| 2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 | 00000000 | 0000 |
Metal Bar Grating Stair Treads
Smooth Aluminum
Serrated Aluminum
Mounting Dimensions
Choose these stair treads for greater durability than metal plank grating stair treads. They have an open surface that prevents debris from accumulating. Nosing is textured for traction.
Aluminum treads are more corrosion resistant than galvanized steel. Plus, they're lightweight, nonsparking, and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Drainage Opening | Mounting Hole | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Ht. | Thick. | Bearing Bar Ht. | Wd. | Lg. | Load Capacity, lbs. | No. of | Dia. | Lg. | Wd. | Ctr.-to-Ctr. (A) | Ctr.-to-Tread Top (B) | Ctr.-to-Tread Nosing (C) | Mounting Hardware Included | For Use Outdoors | Each | |
Smooth | ||||||||||||||||||
Aluminum | ||||||||||||||||||
| 18" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 0000000 | 000000 |
| 24" | 7 3/8" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 0000000 | 000000 |
| 24" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 0000000 | 00000 |
| 30" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 0000000 | 000000 |
Serrated | ||||||||||||||||||
Aluminum | ||||||||||||||||||
| 18" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 00000000 | 00000 |
| 24" | 7 3/8" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 00000000 | 00000 |
| 24" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 00000000 | 00000 |
| 30" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 00000000 | 00000 |
Plank Grating
A
B
Use plank grating for platforms, stair treads, ramps, and decks. Openings allow light to pass through and water to drain. Cut grating with a band saw, hack saw, circular saw, or shears. Use Fasteners for Plank Grating to secure.
Style A are serrated to provide maximum slip resistance.
Styles B and C have projections to provide good slip resistance that's more comfortable than serrated grating.
For technical drawings and 3-D models, click on a part number.
Style A—Serrated
A
Drainage Opening | Uniform Load | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Top Projection | Thick. | Gauge, ga. | Wd. | Lg. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Per Ft. | |
2-, 3-, 4-, 5-, 6-, and 8-ft. Lengths | ||||||||||||
Aluminum | ||||||||||||
| 4 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,794 lbs./sq. ft. @ 2 ft. | 0.09" @ 2 ft. | No | Yes | 0000000 | 000000 |
| 7" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,169 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 897 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 725 lbs./sq. ft. @ 2 ft. | 0.06" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 514 lbs./sq. ft. @ 2 ft. | 0.16" @ 2 ft. | No | Yes | 0000000 | 00000 |
10- and 12-ft. Lengths | ||||||||||||
Aluminum | ||||||||||||
| 4 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,794 lbs./sq. ft. @ 2 ft. | 0.09" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 1,169 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 9 1/2" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 897 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 11 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 725 lbs./sq. ft. @ 2 ft. | 0.06" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18 3/4" | 2" | 7/16" | 7/64" | 10 | 11/16" | 1 7/8" | 514 lbs./sq. ft. @ 2 ft. | 0.16" @ 2 ft. | No | Yes | 0000000 | 00000 |
| Fasteners for Style A Grating (Pkg. of 20) | 000000 | Pkg. | 000000 |
Style B—Projections
B
Drainage Opening | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Ht. | Thick. | Gauge, ga. | Dia. | Rating @ Unsupported Lg. | Deflection @ Unsupported Lg. | Mounting Hardware Included | For Use Outdoors | Per Ft. | |
2-, 3-, 4-, 6-, and 8-ft. Lengths | ||||||||||
Aluminum | ||||||||||
| 5" | 2" | 1/8" | 8 | 1 5/16" | 2,910 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 000000 |
| 7" | 2" | 1/8" | 8 | 1 5/16" | 2,138 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 10" | 2" | 1/8" | 8 | 1 5/16" | 1,048 lbs./sq. ft. @ 2 ft. | 0.5" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 12" | 2" | 1/8" | 8 | 1 5/16" | 1,463 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18" | 2" | 1/8" | 8 | 1 5/16" | 992 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 000000 |
10- and 12-ft. Lengths | ||||||||||
Aluminum | ||||||||||
| 5" | 2" | 1/8" | 8 | 1 5/16" | 2,910 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 7" | 2" | 1/8" | 8 | 1 5/16" | 2,138 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 10" | 2" | 1/8" | 8 | 1 5/16" | 1,048 lbs./sq. ft. @ 2 ft. | 0.5" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 12" | 2" | 1/8" | 8 | 1 5/16" | 1,463 lbs./sq. ft. @ 2 ft. | 0.08" @ 2 ft. | No | Yes | 0000000 | 00000 |
| 18" | 2" | 1/8" | 8 | 1 5/16" | 992 lbs./sq. ft. @ 2 ft. | 0.07" @ 2 ft. | No | Yes | 0000000 | 000000 |
| Fasteners for Style B Grating (Pkg. of 10) | 0000000 | Pkg. | 000000 |
Fasteners for Plank Grating
A
B
C
Secure grating to your support structure.