System of Measurement System of Measurement |
---|
|
Thickness Thickness |
---|

|
|
|
Length Length |
---|
Shape Shape |
---|
![]() | ![]() |
Sheet and Bar | Foil |
![]() | |
Wire |
Material Material | Show |
---|
|
Material Material | Hide |
---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
---|
|
Hardness Hardness |
---|
|
|
Temper Rating Temper Rating |
---|
|
Yield Strength Yield Strength |
---|
|
Tolerance Rating Tolerance Rating |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Heat Treatable Heat Treatable |
---|
|
Specifications Met Specifications Met |
---|
|
Fabrication Fabrication |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Aluminum
More
Hardened Easy-to-Form Pure 1100 Aluminum Sheets and Bars

These sheets and bars are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum. Because 1100 aluminum is 99% pure, it offers superior corrosion resistance and electrical conductivity.
Temper H19 foil is often used as EMI/RFI shielding in electronic applications.
Temper H14 sheets and bars are used for heat exchangers, chemical equipment, and decorative trim.
For technical drawings and 3-D models, click on a part number.
- Yield Strength: 20,000 psi
- Hardness: Brinell 45 (Soft)
- Temper: H19 (Full Hard)
- Fabrication: Cold Rolled
Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
2" × 25 ft. | |||||
---|---|---|---|---|---|
0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
6" × 50 ft. | |||||
0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
6" × 100 ft. | |||||
0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 00000 |
18" × 50 ft. | |||||
0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 00000 |
0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 00000 |
0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
18" × 100 ft. | |||||
0.001" | -0.0001" to 0.0001" | Hardened | -20° to 300° | 0000000 | 000000 |
0.002" | -0.0002" to 0.0002" | Hardened | -20° to 300° | 0000000 | 000000 |
0.003" | -0.0003" to 0.0003" | Hardened | -20° to 300° | 0000000 | 000000 |
- Yield Strength: 15,000 psi
- Hardness: Brinell 30 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
Thick. | Thick. Tolerance | Temperature Range, °F | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 36” | 24” × 48” | 48" × 48" | 48" × 96" | |
0.032" | -0.004" to 0.004" | -200° to 300° | 00000000 | ||||||||||
0.050" | -0.005" to 0.005" | -200° to 300° | 00000000 | ||||||||||
0.063" | -0.005" to 0.005" | -200° to 300° | 00000000 | ||||||||||
0.090" | -0.006" to 0.006" | -200° to 300° | 00000000 | ||||||||||
1/8" | -0.007" to 0.007" | -200° to 300° | 00000000 | ||||||||||
0.190" | -0.011" to 0.011" | -200° to 300° | 00000000 | ||||||||||
1/4" | -0.016" to 0.016" | -200° to 300° | 00000000 |
- Yield Strength: 15,000 psi
- Hardness: Brinell 30 (Soft)
- Temper: H14 (1/2 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B209
Wd. | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.006" to 0.006" Tolerance) | |||||||
---|---|---|---|---|---|---|---|
1" | -200° to 300° | 0000000 | |||||
1 1/2" | -200° to 300° | 0000000 | |||||
2" | -200° to 300° | 0000000 | |||||
3" | -200° to 300° | 0000000 | |||||
4" | -200° to 300° | 0000000 | |||||
3/8" Thick. (-0.02" to 0.02" Tolerance) | |||||||
1" | -200° to 300° | 0000000 | |||||
1 1/2" | -200° to 300° | 0000000 | |||||
2" | -200° to 300° | 0000000 | |||||
3" | -200° to 300° | 0000000 | |||||
4" | -200° to 300° | 0000000 |
Easy-to-Form Pure 1000 Series Aluminum Sheets and Bars
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.”
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 3,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | |
0.0200" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0320" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0400" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0500" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0630" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0800" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
0.0900" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
1/8" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 |
Easy-to-Form 1100 Aluminum Wire



- Yield Strength: 3,500 psi
- Hardness: Not Rated (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Drawn
- Specifications Met: ASTM B211
This wire has a soft temper and will stay in place when bent. Use it as tie wire and for bundling. Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Lg., ft. | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Weight, lb. | Container Type | Each | |
0.013" | -0.001" to 0.001" | 1,735 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 000000 |
0.013" | -0.001" to 0.001" | 6,940 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.013" | -0.001" to 0.001" | 34,700 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.016" | -0.001" to 0.001" | 1,085 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.016" | -0.001" to 0.001" | 4,355 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.016" | -0.001" to 0.001" | 21,790 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.020" | -0.001" to 0.001" | 680 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.020" | -0.001" to 0.001" | 2,725 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.020" | -0.001" to 0.001" | 13,635 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.025" | -0.001" to 0.001" | 430 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.025" | -0.001" to 0.001" | 1,720 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.025" | -0.001" to 0.001" | 8,605 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.032" | -0.001" to 0.001" | 265 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.032" | -0.001" to 0.001" | 1,075 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.032" | -0.001" to 0.001" | 5,380 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.040" | -0.002" to 0.002" | 165 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.040" | -0.002" to 0.002" | 675 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.040" | -0.002" to 0.002" | 3,390 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.051" | -0.002" to 0.002" | 105 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.051" | -0.002" to 0.002" | 425 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.051" | -0.002" to 0.002" | 2,130 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.064" | -0.002" to 0.002" | 67 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.064" | -0.002" to 0.002" | 265 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.064" | -0.002" to 0.002" | 1,340 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
0.080" | -0.002" to 0.002" | 2,025 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
0.081" | -0.002" to 0.002" | 42 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.081" | -0.002" to 0.002" | 165 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.081" | -0.002" to 0.002" | 840 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
0.114" | -0.002" to 0.002" | 21 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 0000 |
0.114" | -0.002" to 0.002" | 84 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.114" | -0.002" to 0.002" | 420 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
0.114" | -0.002" to 0.002" | 1,010 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
0.125" | -0.002" to 0.002" | 830 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
0.126" | -0.002" to 0.002" | 17 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
0.126" | -0.002" to 0.002" | 69 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
0.126" | -0.002" to 0.002" | 330 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
1 ft. Lg. | |||||||
---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Pkg. Qty. | Pkg. | |
0.013" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 00000 |
0.016" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 0000 |
0.020" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 00000 |
0.025" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 00000 |
0.032" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
0.040" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
0.051" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
0.064" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
0.081" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 00000 |
Contaminant-Free High-Vacuum Aluminum Foil

- Yield Strength: 14,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B479, Fed. Spec. QQ-A-1876
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system. It is “A” wettable, so it's completely free of the oils found on other types aluminum foil. Supplied on a plastic core, it comes wrapped in plastic and packed in a plastic box to ensure it stays free of contaminants. Often called UHV (ultra-high vacuum) foil, it is 1100 aluminum, which is highly corrosion resistant and very formable.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
6" × 250 ft. | |||||
---|---|---|---|---|---|
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 0000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
6" × 500 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 250 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 500 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
18" × 250 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
18" × 500 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 250 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 500 ft. | |||||
0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |