7075 Aluminum Bars | McMaster-Carr

Clear All

	System of Measurement System of Measurement

Inch

Metric

	Thickness Thickness

	Width Width

	Diameter Diameter

	Length Length

	Shape Shape


Sheet and Bar	Rod and Disc

90° Angle

	Material Material	Show

Aluminum

7075 Aluminum

	Material Material	Hide

Corning® Willow® Glass

Lead-Base Coppered
Babbitt

Lead-Free Pewter Alloy

Mica

Molybdenum

Neodymium

Neoprene Rubber/Cork
Blend

Samarium-Cobalt
(Rare Earth)

ToughMet™ Copper Nickel

	Temper Temper

T651

T6511

T7351

	Certificate Certificate

	Material Certificate with Traceable Lot Number

	Tolerance Rating Tolerance Rating

Standard

Tight

Undersized

	Specifications Met Specifications Met

ASTM

SAE

	Hardness Rating Hardness Rating

Medium

	Hardness Hardness

Brinell 130

Brinell 150

	Yield Strength Yield Strength

20,000 to 99,999 psi

	Aluminum Performance Properties Aluminum Performance Properties

Easy to Machine

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Heat Treatment Heat Treatment

Hardened

	Appearance Appearance

	Plain

	Fabrication Fabrication

	Heat Treatable Heat Treatable

Yes

	Maximum Temperature Maximum Temperature

Less than 1,000° F

	Minimum Temperature Minimum Temperature

-320° F

	Elongation Elongation

11%

View catalog pages (3)

Forward

How can we improve?

291 Products

About Aluminum

Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Hot- and cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.

Cold-drawn bars are formed by a die for close-tolerance widths, then cut to the lengths listed.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Sheets

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper:
0.032" thick. to 0.190" thick.: T6
1/4" thick. and thicker.: T651
Fabrication: See Table
Specifications Met: ASTM B209

6" × 6"
Thick.	Thick. Tolerance	Fabrication	Heat Treatment	Temperature Range, °F		Each
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	0000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	0000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	0000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/4"	-0.019" to 0.019"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
3/8"	-0.022" to 0.022"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/2"	-0.028" to 0.028"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
3/4"	-0.031" to 0.104"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
1 1/2"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
2"	-0.055" to 0.150"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
2 1/2"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
3"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
6" × 12"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/4"	-0.019" to 0.019"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
3/8"	-0.022" to 0.022"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/2"	-0.028" to 0.028"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
3/4"	-0.031" to 0.104"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1 1/2"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
2"	-0.055" to 0.150"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
2 1/2"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
3"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
6" × 24"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/4"	-0.019" to 0.019"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
3/8"	-0.022" to 0.022"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1/2"	-0.028" to 0.028"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
3/4"	-0.031" to 0.104"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1 1/2"	-0.039" to 0.124"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
2"	-0.055" to 0.150"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
2 1/2"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
3"	-0.075" to 0.200"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
8" × 8"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	0000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	00000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	00000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	00000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1 1/2"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2"	-0.055" to 0.150"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2 1/2"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
12" × 12"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	00000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1 1/2"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2"	-0.055" to 0.150"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2 1/2"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
12" × 24"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1 1/2"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2"	-0.055" to 0.150"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2 1/2"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
18" × 18"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	00000000	00000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	00000000	000000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1 1/2"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2"	-0.055" to 0.150"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2 1/2"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
24" × 24"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	00000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1 1/2"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
2"	-0.055" to 0.150"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
2 1/2"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
3"	-0.075" to 0.200"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
24" × 48"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/4"	-0.031" to 0.104"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
1"	-0.039" to 0.124"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
48" × 48"
0.032"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.040"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.050"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.063"	-0.002" to 0.002"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.090"	-0.003" to 0.003"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/8"	-0.004" to 0.004"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.160"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
0.190"	-0.007" to 0.007"	Cold Rolled	Hardened	-320° to 210°	0000000	000000
1/4"	-0.019" to 0.019"	Hot Rolled	Hardened	-320° to 210°	0000000	000000
3/8"	-0.022" to 0.022"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000
1/2"	-0.028" to 0.028"	Hot Rolled	Hardened	-320° to 210°	0000000	00000000

Bars

Yield Strength: See Table
Hardness: Brinell 130 (Medium)
Temper: See Table
Fabrication: Cold Drawn
Specifications Met: ASTM B211

1/4" Thick. (-0.002" to 0.002" Tolerance)
Wd.	Yield Strength	Temper	Heat Treatment	Temperature Range, °F		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1"	73,000 psi	T651	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
2"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	00000	000000	000000
2 1/2"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	00000	000000	000000
1/2" Thick. (-0.002" to 0.002" Tolerance)
1"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	00000	00000	000000
1 1/2"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	00000	000000	000000
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2 1/2"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
3"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
4"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
3/4" Thick. (-0.003" to 0.003" Tolerance)
1"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	00000	00000	000000
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
1" Thick. (-0.003" to 0.003" Tolerance)
1"	73,000 psi	T651	Hardened	-320° to 210°	0000000	00000	00000	00000	000000	000000
1 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
1" Thick. (-0.0025" to 0.0025" Tolerance)
4"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
1 1/4" Thick. (-0.003" to 0.003" Tolerance)
1 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
1 1/2" Thick. (-0.003" to 0.003" Tolerance)
1 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	00000	000000	000000	000000
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
2 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
4"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
2" Thick. (-0.005" to 0.005" Tolerance)
2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
2 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	00000	000000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
4"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
2 1/2" Thick. (-0.008" to 0.008" Tolerance)
2 1/2"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
3" Thick. (-0.008" to 0.008" Tolerance)
3"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	000000
4"	62,000 psi	T7351	Hardened	-320° to 210°	0000000	000000	000000	000000	000000	00000000

Tight-Tolerance High-Strength 7075 Aluminum Sheets and Bars

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper: T651
Fabrication: Hot Rolled
Specifications Met: ASTM B209, SAE AMS-QQ-A-250/12

Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom. Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

Sheets and bars that are precision ground on all sides are consistently flat, square, and parallel on all six sides. They’re also known as blanks and are ready for use in your CNC machine.

Sheets and bars that are precision ground on top and bottom are also known as flat stock.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Precision Ground on All Sides

Thick.	Thick. Tolerance	Heat Treatment	Temp. Range, °F	Parallel Tolerance	Flatness Tolerance		2" × 12"	4" × 12"	6” × 6”	6” × 12”	8" × 8"	8" × 12"	12" × 12"	12” × 24”
3/16"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.010"	0000000	000000	0000000	0000000	0000000	0000000	0000000	0000000	00
1/4"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.010"	0000000	00000	000000	000000	000000	000000	000000	000000	0000000
3/8"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.010"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
1/2"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
5/8"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
3/4"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
1"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
1 1/4"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000
2"	-0.002" to 0.002"	Hardened	-320° to 210°	0.004"	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	00000000

Precision Ground on Top and Bottom

Thick.	Thick. Tolerance	Heat Treatment	Temp. Range, °F	Flatness Tolerance		2" × 12"	4" × 12"	6” × 6”	6” × 12”	6" × 24"	8" × 8"	12" × 12"	12” × 24”	18" × 18"	24” × 24”
1/4"	-0.002" to 0.002"	Hardened	-320° to 210°	0.010"	0000000	000000	000000	000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000
3/8"	-0.002" to 0.002"	Hardened	-320° to 210°	0.010"	0000000	00000	000000	000000	000000	000000	000000	000000	000000	000000	000000
1/2"	-0.002" to 0.002"	Hardened	-320° to 210°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000	000000
5/8"	-0.002" to 0.002"	Hardened	-320° to 210°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000	000000
3/4"	-0.002" to 0.002"	Hardened	-320° to 210°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000	00000000
1"	-0.002" to 0.002"	Hardened	-320° to 210°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000	00000000

High-Strength 7075 Aluminum Rods and Discs

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Rods

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper:
3/8" to 5/8" dia.: T6
All other sizes: T651
Fabrication: Cold Drawn
Specifications Met: ASTM B211, SAE AMS-QQ-A-225/9

Dia.	Dia. Tolerance	Heat Treatment	Temperature Range, °F		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
3/8"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
1/2"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	0000	00000	00000	00000	00000
5/8"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	0000	00000	00000	00000	00000
3/4"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	00000	00000	00000	00000	00000
7/8"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	00000	00000	00000	00000	000000
1"	-0.002" to 0.002"	Hardened	-320° to 210°	00000000	00000	00000	00000	00000	000000
1 1/8"	-0.003" to 0.003"	Hardened	-320° to 210°	00000000	00000	00000	00000	00000	000000
1 1/4"	-0.003" to 0.003"	Hardened	-320° to 210°	00000000	00000	00000	00000	00000	000000
1 3/8"	-0.003" to 0.003"	Hardened	-320° to 210°	00000000	00000	00000	00000	000000	000000
1 1/2"	-0.003" to 0.003"	Hardened	-320° to 210°	00000000	00000	00000	00000	000000	000000
1 5/8"	-0.004" to 0.004"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
1 3/4"	-0.004" to 0.004"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
1 7/8"	-0.004" to 0.004"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
2"	-0.004" to 0.004"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
2 1/8"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	00000	00000	000000	000000	000000
2 1/4"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	00000	000000	000000	000000	000000
2 3/8"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	00000	000000	000000	000000	000000
2 1/2"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	00000	000000	000000	000000	000000
2 5/8"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	00000	000000	000000	000000	000000
2 3/4"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	000000
3"	-0.006" to 0.006"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	000000
3 1/4"	-0.008" to 0.008"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	00000000
3 1/2"	-0.012" to 0.012"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	00000000
3 3/4"	-0.012" to 0.012"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	00000000
4"	-0.012" to 0.012"	Hardened	-320° to 210°	00000000	000000	000000	000000	000000	00000000
4 1/2"	-0.012" to 0.012"	Hardened	-320° to 210°	00000000	000000	000000	000000	00000000	00000000
5"	-0.012" to 0.012"	Hardened	-320° to 210°	00000000	000000	000000	000000	00000000	00000000
6"	-0.016" to 0.016"	Hardened	-320° to 210°	00000000	000000	000000	00000000	00000000	00000000

Discs

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper: T651
Fabrication: Cold Drawn
Specifications Met: ASTM B211

Dia.	Dia. Tolerance	Heat Treatment	Temperature Range, °F		1/4" Lg.	1/2" Lg.	1" Lg.	3" Lg.
2"	-0.004" to 0.004"	Hardened	-320° to 210°	0000000	00000	000000	000000	000000
2 1/4"	-0.006" to 0.006"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
2 1/2"	-0.006" to 0.006"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
2 3/4"	-0.006" to 0.006"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
3"	-0.008" to 0.008"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
3 1/4"	-0.008" to 0.008"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
3 1/2"	-0.012" to 0.012"	Hardened	-320° to 210°	0000000	00000	00000	00000	00000
4"	-0.012" to 0.012"	Hardened	-320° to 210°	0000000	00000	00000	00000	000000
4 1/2"	-0.012" to 0.012"	Hardened	-320° to 210°	0000000	00000	00000	00000	000000
5"	-0.012" to 0.012"	Hardened	-320° to 210°	0000000	00000	00000	00000	000000
5 1/2"	-0.020" to 0.020"	Hardened	-320° to 210°	0000000	00000	00000	00000	000000
6"	-0.020" to 0.020"	Hardened	-320° to 210°	0000000	00000	00000	00000	000000
7"	-0.025" to 0.025"	Hardened	-320° to 210°	0000000	00000	00000	000000	000000
8"	-0.030" to 0.030"	Hardened	-320° to 210°	0000000	00000	000000	000000	000000

Tight-Tolerance High-Strength 7075 Aluminum Rods

Yield Strength: 73,000 psi
Hardness: Brinell 150 (Medium)
Temper: T6
Fabrication: Cold Worked
Specifications Met: ASTM B211

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. Originally developed for aircraft frames, uses for 7075 aluminum now include keys, gears, and other high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Dia.	Dia. Tolerance	Heat Treatment	Temperature Range, °F	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
3/32"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	000000	000000	000000	000000	000000
1/8"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
3/16"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
1/4"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
5/16"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
3/8"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
7/16"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
1/2"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
9/16"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
5/8"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	00000
11/16"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	000000
3/4"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	000000
7/8"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	000000
1"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	00000	000000
1 1/4"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	00000	000000	000000
1 1/2"	-0.0005" to 0.0000"	Hardened	-320° to 210°	0.005" per ft.	0000000	00000	00000	000000	000000	000000
4mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
5mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
6mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
8mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
10mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
12mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	00000
15mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	000000
20mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	00000	000000
25mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	000000	000000
30mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	00000	00	000000	000000
40mm	-0.0127mm to 0.0000mm	Hardened	-320° to 210°	0.005" per ft.	0000000	00	000000	00	000000	000000

High-Strength 7075 Aluminum 90° Angles

Yield Strength: 70,000 psi
Hardness: Brinell 150 (Medium)
Temper: T6511
Fabrication: Extruded
Specifications Met: ASTM B221, SAE AMS-QQ-A-200/11

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Heat Treatment	Temperature Range, °F	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1/16" Wall Thick. (-0.006" to 0.006" Tolerance)
1/2"	-0.010" to 0.010"	1/2"	-0.010" to 0.010"	7/16"	7/16"	Hardened	-320° to 210°	0.050" per ft.	0000000	000000	000000	000000
3/4"	-0.010" to 0.010"	3/4"	-0.010" to 0.010"	11/16"	11/16"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
7/8"	-0.010" to 0.010"	7/8"	-0.010" to 0.010"	13/16"	13/16"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
1"	-0.024" to 0.024"	1"	-0.024" to 0.024"	15/16"	15/16"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
1 1/2"	-0.024" to 0.024"	1 1/2"	-0.024" to 0.024"	1 7/16"	1 7/16"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	000000
1/8" Wall Thick. (-0.007" to 0.007" Tolerance)
7/8"	-0.010" to 0.010"	7/8"	-0.010" to 0.010"	3/4"	3/4"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
1"	-0.024" to 0.024"	1"	-0.024" to 0.024"	7/8"	7/8"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
1 1/4"	-0.024" to 0.024"	1 1/4"	-0.024" to 0.024"	1 1/8"	1 1/8"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	00000
1 1/2"	-0.024" to 0.024"	1 1/2"	-0.024" to 0.024"	1 3/8"	1 3/8"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	000000
2"	-0.024" to 0.024"	2"	-0.024" to 0.024"	1 7/8"	1 7/8"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	00000	000000
2 1/2"	-0.024" to 0.024"	2 1/2"	-0.024" to 0.024"	2 3/8"	2 3/8"	Hardened	-320° to 210°	0.050" per ft.	0000000	00000	000000	000000