4" Aluminum Plates | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

92 Products

About Foam

About Stainless Steel

About Plastic

About Aluminum

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

About Copper, Brass, and Bronze

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.

Aluminum that meets ASTM B209 or ASTM B221 complies with standards for materials.

Aluminum that meets an SAE AMS standard conforms to the material and process needs of the aerospace industry.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Bars

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: See table
Fabrication: See table
Specifications Met: See table

4" Thick. (-0.034" to 0.034" Tolerance)
Wd.	Fabrication	Temper	Heat Treatment	Temperature Range, °F	Specifications Met		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
4"	Extruded	T6511	Hardened	-320° to 300°	ASTM B221, SAE AMS QQ-A-200/8	0000000	000000	0000000	0000000	0000000	0000000
5"	Extruded	T6511	Hardened	-320° to 300°	ASTM B221, SAE AMS QQ-A-200/8	00000000	000000	000000	000000	000000	00000000
6"	Extruded	T6511	Hardened	-320° to 300°	ASTM B221, SAE AMS QQ-A-200/8	00000000	000000	000000	000000	000000	00000000

Cubes

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: T6511
Fabrication: See table
Specifications Met: ASTM B221, SAE AMS QQ-A-200/8

Thick.	Thick. Tolerance	Wd.	Wd. Tolerance	Lg.	Fabrication	Heat Treatment	Temperature Range, °F	Length Tolerance		Each
4"	-0.034" to 0.034"	4"	-0.034" to 0.034"	4"	Extruded	Hardened	-320° to 300°	Plus	00000000	000000

Tight-Tolerance Multipurpose 6061 Aluminum Sheets and Bars

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: See table
Fabrication: See table
Specifications Met: ASTM B209

These sheets and bars are precision ground either on all six sides or just on the top and bottom. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Sheets and bars that are precision ground on all sides are consistently flat, square, and parallel on all six sides. They’re also known as blanks and are ready for use in your CNC machine.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Precision Ground on All Sides
Thick.	Thick. Tolerance	Wd.	Wd. Tolerance	Lg.	Lg. Tolerance	Fabrication	Temper	Heat Treatment	Temperature Range, °F	Flatness Tolerance		Each
4"	-0.002" to 0.002"	4"	-0.002" to 0.002"	4"	-0.002" to 0.002"	Cold Rolled	T651	Hardened	-320° to 300°	Not Rated	0000000	0000000

Oversized Multipurpose 6061 Aluminum Sheets

Yield Strength: 35,000 psi
Hardness: Brinell 95 (Soft)
Temper: T651
Fabrication: Cold Rolled
Specifications Met: ASTM B209

The thickness is oversized to allow for finishing to exact requirements. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Heat Treatment	Temperature Range, °F		2" × 24"	4" × 24"	6” × 6”	6” × 12”	8" × 8"	12” × 12”	12” × 24”	18" × 18"	24” × 24”
4"	0" to 0.145"	Hardened	-320° to 300°	00000000	0000000	0000000	0000000	0000000	0000000	0000000	000000000	000000000	000000000

Easy-to-Machine MIC6 Cast Aluminum Sheets and Bars

Yield Strength: 15,000 psi
Hardness: Brinell 65 (Soft)
Temper: Not Rated
Fabrication: Cast

MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining. Use these sheets and bars for CNC routing tables, assembly jigs, vacuum chucks, and other applications where consistent flatness and tight tolerances are critical.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Sheets

6" × 6"
Thick.	Thick. Tolerance	Heat Treatment	Flatness Tolerance		Each
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	0000000
6" × 12"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	000000
6" × 24"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	000000
8" × 8"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	000000
12" × 12"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	000000
12" × 24"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	00000000
12" × 48"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	00000000
18" × 18"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	00000000
24" × 24"
4"	-0.005" to 0.005"	Stress Relieved	0.005"	000000000	00000000

High-Strength 2024 Aluminum Sheets and Bars

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.

Cold-drawn bars are formed by a die for close-tolerance widths, then cut to the lengths listed.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Bars

Yield Strength: 47,000 psi
Hardness: Brinell 120 (Medium)
Fabrication: Cold Drawn
Temper:
1/8" to 3/8" thick. bars: T4
All other sizes: T351
Specifications Met: ASTM B211

4" Thick. (-0.01" to 0.01" Tolerance)
Wd.	Heat Treatment	Temperature Range, °F		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
4"	Hardened	-320° to 300°	00000000	0000000	0000000	0000000	000000000	000000000

Low-Carbon Steel Sheets and Bars

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. Some of this material can be surface hardened with heat treating.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Bars

Yield Strength: 54,000 psi
Hardness: Rockwell B70 (Medium)
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Rockwell C60
Specifications Met: ASTM A108

4" Thickness (-0.01" to 0" Tolerance)
Wd.		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
6"	00000000	0000000	0000000	0000000	0000000	000000000
4" Thickness (-0.006" to 0" Tolerance)
4"	00000000	000000	000000	000000	000000	00000000

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.

Bars with rolled edges are also known as true bar; the edges are more precise than sheared edges.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

304 Stainless Steel Bars

Yield Strength: 30,000 psi
Hardness: See Table
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: See Table

							1/2 ft. Lg.
Wd.	Wd. Tolerance	Fabrication	Edge Fabrication	Hardness	Specifications Met	Straightness Tolerance		Each
4" Thick. (0" to 0.063" Tolerance)
6"	-1/8" to 1/8"	Hot Rolled	Rolled	Rockwell B75 (Medium)	ASTM A240	Not Rated	0000000	0000000

Easy-to-Machine 303 Stainless Steel

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Bars

Yield Strength: 30,000 psi
Hardness: Rockwell B75 (Medium)
Heat Treatment: Annealed (Softened)
Heat Treatable: No
Specifications Met: SAE AMS5640, ASTM A582

4" Thick. (-0.031" to 0.062" Tolerance)
Wd.	Fabrication	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.
4"	Hot Rolled	1/8" per 5 ft.	00000000	0000000	000000000	000000000	000000000

Oversized Weldable 954 Bearing Bronze Bars

Yield Strength: 29,000 psi
Hardness: Rockwell B85 (Medium)
Temper: M07
Heat Treatable: Yes
Specifications Met: ASTM B505

Thickness and width are oversized to allow for finishing. 954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

4" Thick. (0.067" to 0.142" Tolerance)
Wd.	Straightness Tolerance		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
4"	0.007" per inch	00000000	0000000	0000000	000000000	000000000	000000000

Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Sheets, Bars, and Strips

These sheets, bars, and strips resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

White sheets, bars, and strips are FDA compliant for contact with food.

For technical drawings and 3-D models, click on a part number.

Sheets

Color: White or Black
Temperature Range: -20° to 180° F
Tensile Strength: 10,000-11,000 psi (Good)
Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R120-R122 (Hard)
For Use Outdoors: No
Specifications Met:
White: ASTM D6100, FDA Compliant 21 CFR 177.2480, NSF/ANSI 51, NSF/ANSI 61
Black: ASTM D6100

		White		Black
Thick.	Thick. Tolerance		Each		Each
6" × 6"
4"	0" to 0.125"	00000000	0000000	00000000	0000000
12" × 12"
4"	0" to 0.125"	00000000	000000	00000000	000000
12" × 24"
4"	0" to 0.125"	00000000	000000	00000000	000000
12" × 48"
4"	0" to 0.125"	00000000	00000000	00000000	00000000
24" × 24"
4"	0" to 0.125"	00000000	00000000	00000000	00000000
24" × 48"
4"	0" to 0.125"	00000000	00000000	00000000	00000000

Bars

Color: White or Black
Temperature Range: -20° to 180° F
Tensile Strength: 10,000-11,000 psi (Good)
Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R120-R122 (Hard)
For Use Outdoors: No
Specifications Met:
White: ASTM D6100, FDA Compliant 21 CFR 177.2480
Black: ASTM D6100

		White		Black
Wd.	Lengths, ft.		Per Ft.		Per Ft.
4" Thick. (0" to 0.125")
4"	1, 2, 3, 4	0000000	0000000	0000000	0000000

Wear-Resistant Easy-to-Machine Acetal Sheets and Bars

Color: White or Black
Temperature Range: -20° to 180° F
Tensile Strength: 9,135-9,700 psi (Good)
Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R120 (Hard)
For Use Outdoors: No
Specifications Met: ASTM D6100, FDA Compliant 21 CFR 177.2470

An economical alternative to Delrin® acetal resin, these acetal copolymer sheets and bars offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.

For technical drawings and 3-D models, click on a part number.

Sheets

		White		Black
Thick.	Thick. Tolerance		Each		Each
6" × 6"
4"	0" to 0.125"	00000000	0000000	00000000	0000000
12" × 12"
4"	0" to 0.125"	0000000	000000	00000000	000000
12" × 24"
4"	0" to 0.125"	0000000	000000	00000000	000000
12" × 48"
4"	0" to 0.125"	00000000	00000000	00000000	00000000
24" × 24"
4"	0" to 0.125"	0000000	00000000	00000000	00000000

Slippery UHMW Polyethylene Sheets, Bars, and Strips

In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastics can’t. These sheets, bars, and strips are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.

If you don't see the size of white sheet you're looking for, please specify length and width under additional white sheet sizes.

For technical drawings and 3-D models, click on a part number.

White or Black Sheets

Temperature Range: -40° to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met:
White: ASTM D4020, ASTM D4976, ASTM D6712, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.2010, FDA Compliant 21 CFR 178.3297
Black: ASTM D4020, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.2010, FDA Compliant 21 CFR 178.3297, UL 94 HB

			White		Black
Thick.	Thickness Tolerance	Fabrication		Each		Each
6" × 6"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000
6" × 12"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000
12" × 12"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000
12" × 24"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000
12" × 36"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000
24" × 24"
4"	-0.2" to 0.2"	Extruded	00000000	000000	00000000	000000

White or Black Bars

Temperature Range: -20° to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: See Table

White
Wd.	Lengths, ft.	Fabrication	Specifications Met		Per Ft.
4" Thick. (-0.2" to 0.2")
4"	1, 2, 3, 4, 5	Extruded	ASTM D4020 ASTM D4976 ASTM D6712 FDA Compliant 21 CFR 177.1520 FDA Compliant 21 CFR 178.2010 FDA Compliant 21 CFR 178.3297	00000000	000000
Black
4" Thick. (-0.2" to 0.2")
4"	1, 2, 3, 4, 5	Extruded	ASTM D4020 FDA Compliant 21 CFR 177.1520 FDA Compliant 21 CFR 178.2010 FDA Compliant 21 CFR 178.3297	00000000	000000

Easy-to-Machine Wear-Resistant Cast Nylon Sheets and Bars

Color: Off-White
Temperature Range: -20° to 200° F
Tensile Strength: 10,000 psi (Good)
Impact Strength: 1.5 ft.-lbs./in. (Poor)
Hardness: Rockwell R110-R115 (Hard)
For Use Outdoors: No
Specifications Met: ASTM D5989, FDA Compliant 21 CFR 177.1500, UL 94 HB

In addition to being easier to machine than standard nylon 6/6, these cast nylon 6 sheets and bars are also better electrical insulators. They have a wear-resistant, slippery surface that reduces friction. Use them to make gears, sprockets, and wear strips. This material is comparable to Nylatron and Nycast.

For technical drawings and 3-D models, click on a part number.

Sheets

6" × 6"
Thick.	Thick. Tolerance		Each
4"	0" to 0.025"	000000000	000000
12" × 12"
4"	0" to 0.025"	00000000	000000
12" × 24"
4"	0" to 0.025"	00000000	000000
12" × 48"
4"	0" to 0.025"	00000000	00000000
24" × 24"
4"	0" to 0.025"	00000000	00000000
24" × 48"
4"	0" to 0.025"	00000000	00000000

Moisture-Resistant Polyethylene (HDPE) Sheets, Bars, and Strips

Practically nonabsorbent, these sheets, bars, and strips won't swell when exposed to water. They’re harder and denser than LDPE, plus they’re more chemical resistant. They are often machined into plugs, seals, and containers.

If you don't see the size you're looking for, please specify length and width under additional sheet sizes.

For technical drawings and 3-D models, click on a part number.

Sheets

Color: White
Maximum Temperature: 180° F
Tensile Strength: 3,920-4,200 psi (Poor)
Impact Strength: 1.1-1.94 ft.-lbs./in. (Poor)
Hardness: Rockwell R40-R80 (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4976, FDA Compliant 21 CFR 177.1520, UL 94 HB

6" × 6"
Thick.	Thick. Tolerance		Each
4"	-0.4" to 0.4"	00000000	0000000
6" × 12"
4"	-0.4" to 0.4"	00000000	000000
12" × 12"
4"	-0.4" to 0.4"	00000000	000000
12" × 24"
4"	-0.4" to 0.4"	00000000	000000
12" × 48"
4"	-0.4" to 0.4"	00000000	000000

Clear Scratch- and UV-Resistant Cast Acrylic Sheets, Bars, and Cubes

These cast acrylic sheets, bars, and cubes are often fabricated into tanks, see-through barrier panels, and light fixture lenses. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material is scratch and UV resistant; it stands up to outdoor use better than polycarbonate and maintains clarity over time.

For technical drawings and 3-D models, click on a part number.

Sheets

Clear

Color: See table
Temperature Range: -40° to 170° F
Tensile Strength: 10,000-11,250 psi (Good)
Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
Hardness: Rockwell M94-M100 (Hard)
For Use Outdoors: Yes
Specifications Met: FDA Compliant 21 CFR 177.1010, USP Class VI

6" × 6"
Thick.	Thick. Tolerance	Color		Each
4"	-0.2" to 0.4"	Clear	00000000	000000
6" × 12"
4"	-0.2" to 0.4"	Clear	00000000	000000
12" × 12"
4"	-0.2" to 0.4"	Clear	00000000	000000
12" × 24"
4"	-0.2" to 0.4"	Clear	00000000	000000
12" × 36"
4"	-0.2" to 0.4"	Clear	00000000	000000

Super-Cushioning Polyurethane Foam Sheets, Bars, Cubes, and Strips

Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support. Use these sheets, bars, cubes, and strips in packaging applications to absorb shock and damp vibration. Foam has open-cell construction, which allows water, air, and gases to be absorbed.

For technical drawings and 3-D models, click on a part number.

Sheets with Smooth Texture

Color: Gray or White
Temperature Range: -20° to 180° F
Cell Type: Open
For Use Outdoors: No
Density: Gray: 2 lbs./cu. ft.; White: 2.8 lbs./cu. ft.
Pressure to Compress 25%: Gray: 1.1 psi (Ultra Soft); White: 0.6 psi (Ultra Soft)
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

12" × 12"
Thick.	Thick. Tolerance	Choose a Color		Each
4"	-0.063" to 0.063"	Gray, White	00000000	000000
24" × 24"
4"	-0.063" to 0.063"	Gray, White	00000000	000000
24" × 72"
4"	-0.063" to 0.063"	Gray, White	00000000	000000
36" × 36"
4"	-0.063" to 0.063"	Gray, White	00000000	000000

2" Wide Sheets with Smooth Texture

Color: Gray or White
Minimum Temperature: 0° F
Maximum Temperature: Gray: 275° F; White: 200° F
Cell Type: Open
For Use Outdoors: No
Density: Gray: 2 lbs./cu. ft.; White: 2.8 lbs./cu. ft.
Pressure to Compress 25%: Not Rated
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

			2" × 36"
Thick.	Thick. Tolerance	Choose a Color		Each
4"	-0.063" to 0.063"	Gray, White	00000000	000000

Adhesive-Back Sheets with Smooth Texture

Color: Gray or White
Minimum Temperature: 0° F
Maximum Temperature: Gray: 275° F; White: 200° F
Cell Type: Open
For Use Outdoors: No
Density: Gray: 2 lbs./cu. ft.; White: 2.8 lbs./cu. ft.
Pressure to Compress 25%: Not Rated
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

		Adhesive			2" × 36"		12" × 12"		24" × 24"
Thick.	Thick. Tolerance	Type	Temperature Range, °F	Choose a Color		Each		Each		Each
4"	-0.063" to 0.063"	Acrylic	0° to 200°	Gray, White	00000000	000000	00000000	000000	000000	00
4"	-0.063" to 0.063"	Acrylic	0° to 200°	Gray	000000	00	000000	00	00000000	0000000

Cubes with Smooth Texture

Color: Gray
Temperature Range: -20° to 180° F
Cell Type: Open
For Use Outdoors: No
Density: 1.5 lbs./cu. ft.
Pressure to Compress 25%: 0.5 psi (Ultra Soft)
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

Thick.	Thick. Tolerance	Wd.	Lg.		Each
4"	-0.125" to 0.125"	4"	4"	0000000	00000

Laminated Super-Cushioning Polyurethane/Polyethylene Foam Sheets and Strips

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration. The polyurethane foam has open-cell construction, which allows water, air, and gases to be absorbed. The polyethylene foam has closed-cell construction, which restricts water, air, and gases from being absorbed.

For technical drawings and 3-D models, click on a part number.

Sheets with Smooth Polyurethane Foam/Coarse Polyethylene Foam

Color: Black
Temperature Range: -20 to 160° F
Cell Type: Polyurethane side: Open; Polyethylene side: Closed
For Use Outdoors: No
Density: 2 lbs./cu. ft.
Pressure to Compress 25%: Polyurethane side: 1 psi (Ultra Soft); Polyethylene side: 9 psi (Soft)
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

12" × 12"
Thick.	Thick. Tolerance		Each
4"	-0.063" to 0.063"	00000000	000000
24" × 24"
4"	-0.063" to 0.063"	00000000	000000
24" × 36"
4"	-0.063" to 0.063"	00000000	000000
24" × 48"
4"	-0.063" to 0.063"	00000000	000000
48" × 54"
4"	-0.063" to 0.063"	00000000	000000

Strips with Smooth Polyurethane Foam/Coarse Polyethylene Foam

Color: Black
Temperature Range: -20 to 160° F
Cell Type: Polyurethane side: Open; Polyethylene side: Closed
For Use Outdoors: No
Density: 2 lbs./cu. ft.
Pressure to Compress 25%: Polyurethane side: 1 psi (Ultra Soft); Polyethylene side: 9 psi (Soft)
Tensile Strength Rating: Fair
Oil-Resistance Rating: Not Rated

		2" × 48"		4" × 48"		6" × 48"
Thick.	Thick. Tolerance		Each		Each		Each
4"	-0.063" to 0.063"	000000000	000000	000000000	000000	000000000	0000000