Strut Channel
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
6'8" length channel is for use with beams spaced 6 ft. apart. The length allows 4" on each end to attach the channel to the beam.
For technical drawings and 3-D models, click on a part number.
Low-Profile Strut Channel
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
6'8" length channel is for use with beams spaced 6 ft. apart. The length allows 4" on each end to attach the channel to the beam.
For technical drawings and 3-D models, click on a part number.
High-Profile Strut Channel
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Extra Low-Profile Strut Channel
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
Aluminum channel is about half the weight of steel and resists corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Corner Strut Channel Brackets
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Surface Strut Channel Brackets
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Push-In Strut Channel Brackets
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
Aluminum brackets are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||
---|---|---|---|---|---|---|---|
For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
1 5/8" | 4 7/8" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 0000000 |
Lg. | |||||||
---|---|---|---|---|---|---|---|
For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
1 5/8" | 3 1/4" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 000000 |
Lg. | |||||||
---|---|---|---|---|---|---|---|
For Strut Channel Ht. | (A) | (B) | Thick. | Mounting Hole Center-to-Edge | Fasteners Included | Each | |
For 1 5/8" Channel Wd. | |||||||
Aluminum | |||||||
1 5/8" | 4 7/8" | 1 3/8" | 1/16" | 7/8" | Yes | 00000000 | 000000 |
Strut Channel Nuts
Serrated grooves securely grip the lip of the channel.
Aluminum nuts are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Strut Channel Ht. | For Strut Channel Wd. | Pkg. Qty. | Pkg. | |
Aluminum | |||||
---|---|---|---|---|---|
1/4"-20 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1 | 00000000 | 00000 |
5/16"-18 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1 | 00000000 | 0000 |
3/8"-16 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1 | 00000000 | 0000 |
1/2"-13 | 13/16", 1 5/8", 2 7/16", 3 1/4" | 1 5/8" | 1 | 00000000 | 0000 |
Strut Channel Nuts with Springs
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Aluminum nuts are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strut Channel Washers
Use with hex nuts to connect threaded rod.
Aluminum washers are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strut Channel Covers
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Aluminum covers are about half the weight of steel and resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Aluminum Bolt-Together Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Rails have bolt holes on all four sides. Connect multiple rails with brackets and connectors.
Flanged rails have flanges that run the length of the rail to mount panels, bins, conveyor stops, and other accessories.
Surface and corner brackets connect rails.
For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
1 1/2" | 1 1/2" | Anodized Aluminum | Yes | 0000000 | 00000 |
Connectors fit inside the rail and are hidden to connect rails to rails with a finished look. Use the 2 15/16" long connector to connect rails that have been cut and no longer have the standard 3/4" distance between the end of the rail and the center of the first hole.
Fixed-height mounting foot has a flange to attach to floors, walls, and ceilings.
Mounting Foot Type | For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
Fixed Height | 1 1/2" | 5" | Anodized Aluminum | Yes | 0000000 | 000000 |